Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-lms.ping_idle_ping.py (from gprs_trx-lms)

Failing for the past 85 builds (Since #2320 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=20402): Process ended prematurely: osmo-stp_10.42.42.5(pid=20402) [trial-2404↪gprs:trx-lms↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20402)]

Standard Output

----------------------------------------------
trial-2404 gprs:trx-lms ping_idle_ping.py
----------------------------------------------
12:15:15.924535 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
12:15:15.936915 tst                     gprs:trx-lms: Using 1 x bts (candidates: 1)
12:15:16.092319 tst                ping_idle_ping.py: using LAC 40829
12:15:16.246480 tst                ping_idle_ping.py: using RAC 29
12:15:16.375066 tst                ping_idle_ping.py: using CellId 40829
12:15:16.502613 tst                ping_idle_ping.py: using BVCI 40830
12:15:16.528409 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
12:15:16.540558 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
12:15:16.552828 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
12:15:16.564770 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
12:15:16.576353 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
12:15:16.588219 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
12:15:16.600315 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
12:15:16.612287 tst                     gprs:trx-lms: Using 1 x modem (candidates: 4)
12:15:16.904408 tst             ping_idle_ping.py:24: start network...
12:15:17.052165 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
12:15:17.582120 run         create_hlr_db(pid=20395): Launched
12:15:17.756241 bus                          /gobi_6: Setting Powered False
12:15:18.777189 run         create_hlr_db(pid=20395): Terminated: ok {rc=0}
12:15:19.180154 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20397): Launched
12:15:19.481537 run   osmo-hlr_10.42.42.2(pid=20399): Launched
12:15:19.599388 run              osmo-stp_10.42.42.5: Starting osmo-stp
12:15:20.126695 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20401): Launched
12:15:20.426640 run   osmo-stp_10.42.42.5(pid=20402): Launched
12:15:20.536013 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
12:15:21.058130 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20404): Launched
12:15:21.164564 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
12:15:21.426092 run              patchelf(pid=20405): Launched
12:15:21.602202 run   osmo-stp_10.42.42.5(pid=20402): ERR: Terminated: ERROR {rc=1}  [trial-2404↪gprs:trx-lms↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20402)]
12:15:21.731232 run   osmo-stp_10.42.42.5(pid=20402): stdout: 
| (launched: 2022-12-14_12:15:20.278142)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
12:15:21.861291 run   osmo-stp_10.42.42.5(pid=20402): stderr: 
| �[0;m�[38;5;43m20221214121520450 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214121520450 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214121520450 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214121520451 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214121520451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214121520451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214121520451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
12:15:21.985840 run   osmo-stp_10.42.42.5(pid=20402): stdout: 
| (launched: 2022-12-14_12:15:20.278142)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
12:15:22.108689 run   osmo-stp_10.42.42.5(pid=20402): stderr: 
| �[0;m�[38;5;43m20221214121520450 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214121520450 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214121520450 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214121520451 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214121520451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214121520451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214121520451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
12:15:22.252200 run              patchelf(pid=20405): Terminating (SIGINT)
12:15:22.421129 run              patchelf(pid=20405): Terminated: ok {rc=0}
12:15:22.451821 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=20402): Process ended prematurely: osmo-stp_10.42.42.5(pid=20402) [trial-2404↪gprs:trx-lms↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20402)]  [trial-2404↪gprs:trx-lms↪ping_idle_ping.py:27]
12:15:22.460605 tst             ping_idle_ping.py:27: Test FAILED (6.5 sec)
12:15:22.521212 run   osmo-hlr_10.42.42.2(pid=20399): ERR: Terminated: ERROR {rc=237}  [trial-2404↪gprs:trx-lms↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20399)]
12:15:22.570594 run   osmo-hlr_10.42.42.2(pid=20399): stdout: 
| (launched: 2022-12-14_12:15:19.332576) 
12:15:22.620541 run   osmo-hlr_10.42.42.2(pid=20399): stderr: 
| �[0;m�[1;31m20221214121519509 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214121519509 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214121519509 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214121519509 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214121519509 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214121519509 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214121519521 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2404/run.2022-12-14_11-25-45/gprs:trx-lms/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214121519530 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214121519530 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214121519530 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
12:15:22.663165 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20397): Terminating (SIGTERM)
12:15:22.703237 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20401): Terminating (SIGTERM)
12:15:22.743478 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20404): Terminating (SIGTERM)
12:15:22.752743 ---      ParallelTerminationStrategy: PID 20397 died...
12:15:22.806904 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20397): Terminated: ok {rc=0}
12:15:22.816551 ---      ParallelTerminationStrategy: PID 20401 died...
12:15:22.870315 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20401): Terminated: ok {rc=0}
12:15:22.879880 ---      ParallelTerminationStrategy: PID 20404 died...
12:15:22.933749 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20404): Terminated: ok {rc=0}
12:15:23.022830 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20402): Process ended prematurely: osmo-stp_10.42.42.5(pid=20402) [trial-2404↪gprs:trx-lms↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20402)]