Failed
gprs:trx-b200+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=26197): Process ended prematurely: osmo-stp_10.42.42.5(pid=26197) [trial-2405↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26197)]
Standard Output
---------------------------------------------- trial-2405 gprs:trx-b200+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 13:18:32.707045 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:18:32.717789 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 13:18:32.871775 tst cs_paging_gprs_active.py: using LAC 41163 13:18:32.993254 tst cs_paging_gprs_active.py: using RAC 108 13:18:33.110012 tst cs_paging_gprs_active.py: using CellId 41163 13:18:33.227274 tst cs_paging_gprs_active.py: using BVCI 41164 13:18:33.250334 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:18:33.261094 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:18:33.271599 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:18:33.282133 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:18:33.293057 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:18:33.303801 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:18:33.314545 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:18:33.325220 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:18:33.335976 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 13:18:33.451781 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 13:18:33.747117 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:18:33.883255 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:18:34.218863 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26187): Launched 13:18:34.497393 run iperf3-srv_10.42.42.10(pid=26188): Launched 13:18:34.696603 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:18:34.833399 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:18:35.169504 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26189): Launched 13:18:35.447113 run iperf3-srv_10.42.42.10(pid=26190): Launched 13:18:35.646421 tst cs_paging_gprs_active.py:38: start network... 13:18:35.783134 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:18:36.294061 run create_hlr_db(pid=26191): Launched 13:18:36.482131 bus /gobi_6: Setting Powered False 13:18:37.503287 run create_hlr_db(pid=26191): Terminated: ok {rc=0} 13:18:37.934979 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26193): Launched 13:18:38.260242 run osmo-hlr_10.42.42.2(pid=26194): Launched 13:18:38.380448 run osmo-stp_10.42.42.5: Starting osmo-stp 13:18:38.943437 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26196): Launched 13:18:39.268035 run osmo-stp_10.42.42.5(pid=26197): Launched 13:18:39.386362 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:18:39.951589 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26200): Launched 13:18:40.068095 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:18:40.350431 run patchelf(pid=26201): Launched 13:18:40.540486 run osmo-stp_10.42.42.5(pid=26197): ERR: Terminated: ERROR {rc=1} [trial-2405↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26197)] 13:18:40.679345 run osmo-stp_10.42.42.5(pid=26197): stdout: | (launched: 2022-12-14_13:18:39.108678) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:18:40.819218 run osmo-stp_10.42.42.5(pid=26197): stderr: | �[0;m�[38;5;43m20221214131839300 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214131839300 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214131839300 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214131839301 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214131839303 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214131839303 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214131839303 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:18:40.954155 run osmo-stp_10.42.42.5(pid=26197): stdout: | (launched: 2022-12-14_13:18:39.108678) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:18:41.087394 run osmo-stp_10.42.42.5(pid=26197): stderr: | �[0;m�[38;5;43m20221214131839300 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214131839300 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214131839300 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214131839301 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214131839303 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214131839303 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214131839303 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:18:41.242634 run patchelf(pid=26201): Terminating (SIGINT) 13:18:41.424379 run patchelf(pid=26201): Terminated: ok {rc=0} 13:18:41.457971 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26197): Process ended prematurely: osmo-stp_10.42.42.5(pid=26197) [trial-2405↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26197)] [trial-2405↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 13:18:41.467788 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 13:18:41.530855 run osmo-hlr_10.42.42.2(pid=26194): ERR: Terminated: ERROR {rc=237} [trial-2405↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26194)] 13:18:41.582409 run osmo-hlr_10.42.42.2(pid=26194): stdout: | (launched: 2022-12-14_13:18:38.101025) 13:18:41.634340 run osmo-hlr_10.42.42.2(pid=26194): stderr: | �[0;m�[1;31m20221214131838297 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214131838297 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214131838297 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214131838298 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214131838298 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214131838298 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214131838311 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2405/run.2022-12-14_12-53-19/gprs:trx-b200+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214131838319 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214131838319 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214131838319 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:18:41.678934 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26187): Terminating (SIGTERM) 13:18:41.721246 run iperf3-srv_10.42.42.10(pid=26188): Terminating (SIGTERM) 13:18:41.763451 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26189): Terminating (SIGTERM) 13:18:41.806100 run iperf3-srv_10.42.42.10(pid=26190): Terminating (SIGTERM) 13:18:41.848192 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26193): Terminating (SIGTERM) 13:18:41.890483 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26196): Terminating (SIGTERM) 13:18:41.932138 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26200): Terminating (SIGTERM) 13:18:41.941765 --- ParallelTerminationStrategy: PID 26187 died... 13:18:41.997768 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26187): Terminated: ok {rc=0} 13:18:42.007761 --- ParallelTerminationStrategy: PID 26188 died... 13:18:42.063262 run iperf3-srv_10.42.42.10(pid=26188): Terminated {rc=256} 13:18:42.073148 --- ParallelTerminationStrategy: PID 26189 died... 13:18:42.128352 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26189): Terminated: ok {rc=0} 13:18:42.138200 --- ParallelTerminationStrategy: PID 26190 died... 13:18:42.193387 run iperf3-srv_10.42.42.10(pid=26190): Terminated {rc=256} 13:18:42.203190 --- ParallelTerminationStrategy: PID 26193 died... 13:18:42.258548 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26193): Terminated: ok {rc=0} 13:18:42.268429 --- ParallelTerminationStrategy: PID 26196 died... 13:18:42.323987 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26196): Terminated: ok {rc=0} 13:18:42.333907 --- ParallelTerminationStrategy: PID 26200 died... 13:18:42.389357 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26200): Terminated: ok {rc=0} 13:18:42.475196 bus /gobi_0: Setting Powered False 13:18:43.580840 bus /gobi_0: Setting Powered False 13:18:44.688356 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26197): Process ended prematurely: osmo-stp_10.42.42.5(pid=26197) [trial-2405↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26197)]