Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-lms.ping_idle_ping.py (from gprs_trx-lms)

Failing for the past 86 builds (Since #2320 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=28955): Process ended prematurely: osmo-stp_10.42.42.5(pid=28955) [trial-2405↪gprs:trx-lms↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28955)]

Standard Output

----------------------------------------------
trial-2405 gprs:trx-lms ping_idle_ping.py
----------------------------------------------
13:42:25.725514 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
13:42:25.736719 tst                     gprs:trx-lms: Using 1 x bts (candidates: 1)
13:42:25.874761 tst                ping_idle_ping.py: using LAC 41290
13:42:25.997706 tst                ping_idle_ping.py: using RAC 235
13:42:26.113864 tst                ping_idle_ping.py: using CellId 41290
13:42:26.230154 tst                ping_idle_ping.py: using BVCI 41291
13:42:26.253190 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
13:42:26.263727 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
13:42:26.274273 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
13:42:26.284610 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
13:42:26.295531 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
13:42:26.305892 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
13:42:26.317332 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
13:42:26.328318 tst                     gprs:trx-lms: Using 1 x modem (candidates: 4)
13:42:26.601490 tst             ping_idle_ping.py:24: start network...
13:42:26.726549 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
13:42:27.208145 run         create_hlr_db(pid=28949): Launched
13:42:27.381529 bus                          /gobi_6: Setting Powered False
13:42:28.402910 run         create_hlr_db(pid=28949): Terminated: ok {rc=0}
13:42:28.801623 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28951): Launched
13:42:29.102652 run   osmo-hlr_10.42.42.2(pid=28952): Launched
13:42:29.221195 run              osmo-stp_10.42.42.5: Starting osmo-stp
13:42:29.747065 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28954): Launched
13:42:30.049382 run   osmo-stp_10.42.42.5(pid=28955): Launched
13:42:30.158564 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
13:42:30.680024 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28957): Launched
13:42:30.786652 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
13:42:31.059225 run              patchelf(pid=28958): Launched
13:42:31.237243 run   osmo-stp_10.42.42.5(pid=28955): ERR: Terminated: ERROR {rc=1}  [trial-2405↪gprs:trx-lms↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28955)]
13:42:31.368173 run   osmo-stp_10.42.42.5(pid=28955): stdout: 
| (launched: 2022-12-14_13:42:29.899306)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
13:42:31.498897 run   osmo-stp_10.42.42.5(pid=28955): stderr: 
| �[0;m�[38;5;43m20221214134230071 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214134230071 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214134230071 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214134230072 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214134230072 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214134230072 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214134230072 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
13:42:31.625495 run   osmo-stp_10.42.42.5(pid=28955): stdout: 
| (launched: 2022-12-14_13:42:29.899306)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
13:42:31.751015 run   osmo-stp_10.42.42.5(pid=28955): stderr: 
| �[0;m�[38;5;43m20221214134230071 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214134230071 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214134230071 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214134230072 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214134230072 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214134230072 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214134230072 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
13:42:31.897527 run              patchelf(pid=28958): Terminating (SIGINT)
13:42:32.068879 run              patchelf(pid=28958): Terminated: ok {rc=0}
13:42:32.100451 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=28955): Process ended prematurely: osmo-stp_10.42.42.5(pid=28955) [trial-2405↪gprs:trx-lms↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28955)]  [trial-2405↪gprs:trx-lms↪ping_idle_ping.py:27]
13:42:32.110305 tst             ping_idle_ping.py:27: Test FAILED (6.4 sec)
13:42:32.170658 run   osmo-hlr_10.42.42.2(pid=28952): ERR: Terminated: ERROR {rc=237}  [trial-2405↪gprs:trx-lms↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28952)]
13:42:32.220093 run   osmo-hlr_10.42.42.2(pid=28952): stdout: 
| (launched: 2022-12-14_13:42:28.954441) 
13:42:32.269622 run   osmo-hlr_10.42.42.2(pid=28952): stderr: 
| �[0;m�[1;31m20221214134229129 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214134229129 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214134229129 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214134229129 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214134229129 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214134229129 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214134229143 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2405/run.2022-12-14_12-53-19/gprs:trx-lms/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214134229151 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214134229151 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214134229152 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
13:42:32.311322 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28951): Terminating (SIGTERM)
13:42:32.350635 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28954): Terminating (SIGTERM)
13:42:32.389929 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28957): Terminating (SIGTERM)
13:42:32.398727 ---      ParallelTerminationStrategy: PID 28951 died...
13:42:32.451175 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28951): Terminated: ok {rc=0}
13:42:32.460736 ---      ParallelTerminationStrategy: PID 28954 died...
13:42:32.513046 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28954): Terminated: ok {rc=0}
13:42:32.522468 ---      ParallelTerminationStrategy: PID 28957 died...
13:42:32.574990 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28957): Terminated: ok {rc=0}
13:42:32.663092 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28955): Process ended prematurely: osmo-stp_10.42.42.5(pid=28955) [trial-2405↪gprs:trx-lms↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28955)]