Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=27122): Process ended prematurely: osmo-stp_10.42.42.5(pid=27122) [trial-2405↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27122)]
Standard Output
---------------------------------------------- trial-2405 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 13:27:39.426821 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:27:39.438483 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 13:27:39.598838 tst iperf3.py: using LAC 41211 13:27:39.718738 tst iperf3.py: using RAC 156 13:27:39.839110 tst iperf3.py: using CellId 41211 13:27:39.961734 tst iperf3.py: using BVCI 41212 13:27:39.984834 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:27:39.995941 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:27:40.007037 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:27:40.017885 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:27:40.028651 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:27:40.039337 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:27:40.050294 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:27:40.060940 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:27:40.071752 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 13:27:40.366746 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 13:27:40.502393 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:27:40.837538 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27114): Launched 13:27:41.116172 run iperf3-srv_10.42.42.10(pid=27115): Launched 13:27:41.315202 tst iperf3.py:8: start network... 13:27:41.451219 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:27:41.960901 run create_hlr_db(pid=27116): Launched 13:27:42.149240 bus /gobi_6: Setting Powered False 13:27:43.170773 run create_hlr_db(pid=27116): Terminated: ok {rc=0} 13:27:43.575456 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27118): Launched 13:27:43.876919 run osmo-hlr_10.42.42.2(pid=27119): Launched 13:27:43.987994 run osmo-stp_10.42.42.5: Starting osmo-stp 13:27:44.513835 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27121): Launched 13:27:44.814984 run osmo-stp_10.42.42.5(pid=27122): Launched 13:27:44.924662 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:27:45.450861 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27124): Launched 13:27:45.558095 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:27:45.820412 run patchelf(pid=27125): Launched 13:27:46.033512 run osmo-stp_10.42.42.5(pid=27122): ERR: Terminated: ERROR {rc=1} [trial-2405↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27122)] 13:27:46.177156 run osmo-stp_10.42.42.5(pid=27122): stdout: | (launched: 2022-12-14_13:27:44.667176) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:27:46.321554 run osmo-stp_10.42.42.5(pid=27122): stderr: | �[0;m�[38;5;43m20221214132744838 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214132744839 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214132744839 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214132744839 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214132744840 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214132744840 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214132744840 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:27:46.459625 run osmo-stp_10.42.42.5(pid=27122): stdout: | (launched: 2022-12-14_13:27:44.667176) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:27:46.599426 run osmo-stp_10.42.42.5(pid=27122): stderr: | �[0;m�[38;5;43m20221214132744838 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214132744839 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214132744839 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214132744839 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214132744840 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214132744840 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214132744840 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:27:46.760168 run patchelf(pid=27125): Terminating (SIGINT) 13:27:46.948344 run patchelf(pid=27125): Terminated: ok {rc=0} 13:27:46.990577 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=27122): Process ended prematurely: osmo-stp_10.42.42.5(pid=27122) [trial-2405↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27122)] [trial-2405↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8] 13:27:47.003212 tst iperf3.py:8: Test FAILED (7.6 sec) 13:27:47.074591 run osmo-hlr_10.42.42.2(pid=27119): ERR: Terminated: ERROR {rc=237} [trial-2405↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27119)] 13:27:47.125361 run osmo-hlr_10.42.42.2(pid=27119): stdout: | (launched: 2022-12-14_13:27:43.729357) 13:27:47.176072 run osmo-hlr_10.42.42.2(pid=27119): stderr: | �[0;m�[1;31m20221214132743906 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214132743906 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214132743906 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214132743906 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214132743906 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214132743906 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214132743921 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2405/run.2022-12-14_12-53-19/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214132743931 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214132743931 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214132743931 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:27:47.218704 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27114): Terminating (SIGTERM) 13:27:47.258491 run iperf3-srv_10.42.42.10(pid=27115): Terminating (SIGTERM) 13:27:47.298292 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27118): Terminating (SIGTERM) 13:27:47.337916 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27121): Terminating (SIGTERM) 13:27:47.377862 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27124): Terminating (SIGTERM) 13:27:47.387070 --- ParallelTerminationStrategy: PID 27114 died... 13:27:47.440756 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27114): Terminated: ok {rc=0} 13:27:47.450483 --- ParallelTerminationStrategy: PID 27115 died... 13:27:47.503849 run iperf3-srv_10.42.42.10(pid=27115): Terminated {rc=256} 13:27:47.513513 --- ParallelTerminationStrategy: PID 27118 died... 13:27:47.566724 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27118): Terminated: ok {rc=0} 13:27:47.576424 --- ParallelTerminationStrategy: PID 27121 died... 13:27:47.629839 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27121): Terminated: ok {rc=0} 13:27:47.639478 --- ParallelTerminationStrategy: PID 27124 died... 13:27:47.692584 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27124): Terminated: ok {rc=0} 13:27:47.780128 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27122): Process ended prematurely: osmo-stp_10.42.42.5(pid=27122) [trial-2405↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27122)]