Failed
gprs:trx-sysmocell5000.ping_idle_ping.py (from gprs_trx-sysmocell5000)
Stacktrace
osmo-stp_10.42.42.5(pid=3333): Process ended prematurely: osmo-stp_10.42.42.5(pid=3333) [trial-2406↪gprs:trx-sysmocell5000↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3333)]
Standard Output
---------------------------------------------- trial-2406 gprs:trx-sysmocell5000 ping_idle_ping.py ---------------------------------------------- 14:52:50.436810 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 14:52:50.448300 tst gprs:trx-sysmocell5000: Using 1 x bts (candidates: 1) 14:52:50.586188 tst ping_idle_ping.py: using LAC 41660 14:52:50.710993 tst ping_idle_ping.py: using RAC 95 14:52:50.835171 tst ping_idle_ping.py: using CellId 41660 14:52:50.963257 tst ping_idle_ping.py: using BVCI 41661 14:52:50.987576 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 14:52:50.998976 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 14:52:51.010206 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 14:52:51.021357 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 14:52:51.032454 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 14:52:51.043561 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 14:52:51.054886 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 14:52:51.065939 tst gprs:trx-sysmocell5000: Using 1 x modem (candidates: 4) 14:52:51.354727 tst ping_idle_ping.py:24: start network... 14:52:51.486890 run osmo-hlr_10.42.42.2: Starting osmo-hlr 14:52:51.996942 run create_hlr_db(pid=3327): Launched 14:52:52.182101 bus /gobi_6: Setting Powered False 14:52:53.202828 run create_hlr_db(pid=3327): Terminated: ok {rc=0} 14:52:53.623020 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3329): Launched 14:52:53.921547 run osmo-hlr_10.42.42.2(pid=3330): Launched 14:52:54.036375 run osmo-stp_10.42.42.5: Starting osmo-stp 14:52:54.560648 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3332): Launched 14:52:54.858497 run osmo-stp_10.42.42.5(pid=3333): Launched 14:52:54.967360 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 14:52:55.485488 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3335): Launched 14:52:55.591154 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 14:52:55.850809 run patchelf(pid=3336): Launched 14:52:56.025433 run osmo-stp_10.42.42.5(pid=3333): ERR: Terminated: ERROR {rc=1} [trial-2406↪gprs:trx-sysmocell5000↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3333)] 14:52:56.152696 run osmo-stp_10.42.42.5(pid=3333): stdout: | (launched: 2022-12-14_14:52:54.710960) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:52:56.279878 run osmo-stp_10.42.42.5(pid=3333): stderr: | �[0;m�[38;5;43m20221214145254881 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214145254881 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214145254881 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214145254882 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214145254884 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214145254884 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214145254884 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:52:56.402316 run osmo-stp_10.42.42.5(pid=3333): stdout: | (launched: 2022-12-14_14:52:54.710960) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:52:56.523801 run osmo-stp_10.42.42.5(pid=3333): stderr: | �[0;m�[38;5;43m20221214145254881 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214145254881 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214145254881 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214145254882 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214145254884 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214145254884 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214145254884 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:52:56.665999 run patchelf(pid=3336): Terminating (SIGINT) 14:52:56.833267 run patchelf(pid=3336): Terminated: ok {rc=0} 14:52:56.863642 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=3333): Process ended prematurely: osmo-stp_10.42.42.5(pid=3333) [trial-2406↪gprs:trx-sysmocell5000↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3333)] [trial-2406↪gprs:trx-sysmocell5000↪ping_idle_ping.py:27] 14:52:56.872151 tst ping_idle_ping.py:27: Test FAILED (6.4 sec) 14:52:56.933407 run osmo-hlr_10.42.42.2(pid=3330): ERR: Terminated: ERROR {rc=237} [trial-2406↪gprs:trx-sysmocell5000↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3330)] 14:52:56.983035 run osmo-hlr_10.42.42.2(pid=3330): stdout: | (launched: 2022-12-14_14:52:53.774239) 14:52:57.033595 run osmo-hlr_10.42.42.2(pid=3330): stderr: | �[0;m�[1;31m20221214145253949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214145253949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214145253949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214145253949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214145253949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214145253949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214145253962 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2406/run.2022-12-14_14-20-43/gprs:trx-sysmocell5000/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214145253970 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214145253970 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214145253970 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 14:52:57.076601 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3329): Terminating (SIGTERM) 14:52:57.117332 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3332): Terminating (SIGTERM) 14:52:57.158598 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3335): Terminating (SIGTERM) 14:52:57.167848 --- ParallelTerminationStrategy: PID 3329 died... 14:52:57.221857 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3329): Terminated: ok {rc=0} 14:52:57.231496 --- ParallelTerminationStrategy: PID 3332 died... 14:52:57.285263 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3332): Terminated: ok {rc=0} 14:52:57.294783 --- ParallelTerminationStrategy: PID 3335 died... 14:52:57.348652 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3335): Terminated: ok {rc=0} 14:52:57.431689 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3333): Process ended prematurely: osmo-stp_10.42.42.5(pid=3333) [trial-2406↪gprs:trx-sysmocell5000↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3333)]