Failed
gprs:oc2g+mod-bts0-egprs.ping.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=1896): Process ended prematurely: osmo-stp_10.42.42.5(pid=1896) [trial-2406↪gprs:oc2g+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1896)]
Standard Output
---------------------------------------------- trial-2406 gprs:oc2g+mod-bts0-egprs ping.py ---------------------------------------------- 14:36:12.329866 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:36:12.341276 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 14:36:12.463784 tst ping.py: using LAC 41571 14:36:12.587584 tst ping.py: using RAC 6 14:36:12.708039 tst ping.py: using CellId 41571 14:36:12.827860 tst ping.py: using BVCI 41572 14:36:12.850744 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:36:12.861504 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:36:12.872162 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:36:12.882976 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:36:12.893813 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:36:12.904577 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:36:12.915696 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:36:12.926754 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 14:36:13.217849 tst ping.py:19: start network... 14:36:13.351000 run osmo-hlr_10.42.42.2: Starting osmo-hlr 14:36:13.861489 run create_hlr_db(pid=1890): Launched 14:36:14.047951 bus /gobi_6: Setting Powered False 14:36:15.068806 run create_hlr_db(pid=1890): Terminated: ok {rc=0} 14:36:15.473746 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1892): Launched 14:36:15.774307 run osmo-hlr_10.42.42.2(pid=1893): Launched 14:36:15.937632 run osmo-stp_10.42.42.5: Starting osmo-stp 14:36:16.524087 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1895): Launched 14:36:16.997339 run osmo-stp_10.42.42.5(pid=1896): Launched 14:36:17.228495 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 14:36:17.766941 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1898): Launched 14:36:17.873071 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 14:36:18.137427 run patchelf(pid=1899): Launched 14:36:18.313350 run osmo-stp_10.42.42.5(pid=1896): ERR: Terminated: ERROR {rc=1} [trial-2406↪gprs:oc2g+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1896)] 14:36:18.442006 run osmo-stp_10.42.42.5(pid=1896): stdout: | (launched: 2022-12-14_14:36:16.678230) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:36:18.570867 run osmo-stp_10.42.42.5(pid=1896): stderr: | �[0;m�[38;5;43m20221214143616965 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214143616966 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214143616968 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214143616969 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214143616971 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214143616972 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214143616972 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:36:18.695096 run osmo-stp_10.42.42.5(pid=1896): stdout: | (launched: 2022-12-14_14:36:16.678230) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:36:18.818137 run osmo-stp_10.42.42.5(pid=1896): stderr: | �[0;m�[38;5;43m20221214143616965 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214143616966 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214143616968 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214143616969 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214143616971 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214143616972 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214143616972 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:36:18.961785 run patchelf(pid=1899): Terminating (SIGINT) 14:36:19.131289 run patchelf(pid=1899): Terminated: ok {rc=0} 14:36:19.162059 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=1896): Process ended prematurely: osmo-stp_10.42.42.5(pid=1896) [trial-2406↪gprs:oc2g+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1896)] [trial-2406↪gprs:oc2g+mod-bts0-egprs↪ping.py:22] 14:36:19.170808 tst ping.py:22: Test FAILED (6.8 sec) 14:36:19.231558 run osmo-hlr_10.42.42.2(pid=1893): ERR: Terminated: ERROR {rc=237} [trial-2406↪gprs:oc2g+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1893)] 14:36:19.281091 run osmo-hlr_10.42.42.2(pid=1893): stdout: | (launched: 2022-12-14_14:36:15.625823) 14:36:19.331270 run osmo-hlr_10.42.42.2(pid=1893): stderr: | �[0;m�[1;31m20221214143615802 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214143615802 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214143615802 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214143615802 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214143615802 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214143615802 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214143615814 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2406/run.2022-12-14_14-20-43/gprs:oc2g+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214143615823 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214143615823 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214143615823 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 14:36:19.374288 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1892): Terminating (SIGTERM) 14:36:19.414425 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1895): Terminating (SIGTERM) 14:36:19.454932 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1898): Terminating (SIGTERM) 14:36:19.464251 --- ParallelTerminationStrategy: PID 1892 died... 14:36:19.518644 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1892): Terminated: ok {rc=0} 14:36:19.528660 --- ParallelTerminationStrategy: PID 1895 died... 14:36:19.582991 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1895): Terminated: ok {rc=0} 14:36:19.592703 --- ParallelTerminationStrategy: PID 1898 died... 14:36:19.646953 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1898): Terminated: ok {rc=0} 14:36:19.735317 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1896): Process ended prematurely: osmo-stp_10.42.42.5(pid=1896) [trial-2406↪gprs:oc2g+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1896)]