Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:oc2g.ping_idle_ping.py (from gprs_oc2g)

Failing for the past 270 builds (Since #2139 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=1837): Process ended prematurely: osmo-stp_10.42.42.5(pid=1837) [trial-2406↪gprs:oc2g↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1837)]

Standard Output

----------------------------------------------
trial-2406 gprs:oc2g ping_idle_ping.py
----------------------------------------------
14:35:20.292172 tst                        gprs:oc2g: Using 1 x ip_address (candidates: 9)
14:35:20.303495 tst                        gprs:oc2g: Using 1 x bts (candidates: 1)
14:35:20.426443 tst                ping_idle_ping.py: using LAC 41567
14:35:20.547850 tst                ping_idle_ping.py: using RAC 2
14:35:20.666471 tst                ping_idle_ping.py: using CellId 41567
14:35:20.785180 tst                ping_idle_ping.py: using BVCI 41568
14:35:20.808155 tst                        gprs:oc2g: Using 1 x ip_address (candidates: 9)
14:35:20.818748 tst                        gprs:oc2g: Using 1 x ip_address (candidates: 9)
14:35:20.829272 tst                        gprs:oc2g: Using 1 x ip_address (candidates: 9)
14:35:20.839681 tst                        gprs:oc2g: Using 1 x ip_address (candidates: 9)
14:35:20.850301 tst                        gprs:oc2g: Using 1 x ip_address (candidates: 9)
14:35:20.861417 tst                        gprs:oc2g: Using 1 x ip_address (candidates: 9)
14:35:20.872536 tst                        gprs:oc2g: Using 1 x ip_address (candidates: 9)
14:35:20.883587 tst                        gprs:oc2g: Using 1 x modem (candidates: 4)
14:35:21.180267 tst             ping_idle_ping.py:24: start network...
14:35:21.316028 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
14:35:21.840444 run          create_hlr_db(pid=1830): Launched
14:35:22.030486 bus                          /gobi_6: Setting Powered False
14:35:23.050739 run          create_hlr_db(pid=1830): Terminated: ok {rc=0}
14:35:23.487497 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1833): Launched
14:35:23.816620 run    osmo-hlr_10.42.42.2(pid=1834): Launched
14:35:23.938128 run              osmo-stp_10.42.42.5: Starting osmo-stp
14:35:24.509071 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1836): Launched
14:35:24.836432 run    osmo-stp_10.42.42.5(pid=1837): Launched
14:35:24.954704 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
14:35:25.526781 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1839): Launched
14:35:25.642532 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
14:35:25.929390 run               patchelf(pid=1840): Launched
14:35:26.120705 run    osmo-stp_10.42.42.5(pid=1837): ERR: Terminated: ERROR {rc=1}  [trial-2406↪gprs:oc2g↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1837)]
14:35:26.259920 run    osmo-stp_10.42.42.5(pid=1837): stdout: 
| (launched: 2022-12-14_14:35:24.674875)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
14:35:26.399391 run    osmo-stp_10.42.42.5(pid=1837): stderr: 
| �[0;m�[38;5;43m20221214143524868 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214143524868 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214143524868 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214143524868 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214143524871 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214143524871 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214143524871 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
14:35:26.534001 run    osmo-stp_10.42.42.5(pid=1837): stdout: 
| (launched: 2022-12-14_14:35:24.674875)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
14:35:26.667694 run    osmo-stp_10.42.42.5(pid=1837): stderr: 
| �[0;m�[38;5;43m20221214143524868 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214143524868 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214143524868 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214143524868 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214143524871 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214143524871 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214143524871 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
14:35:26.823122 run               patchelf(pid=1840): Terminating (SIGINT)
14:35:27.005971 run               patchelf(pid=1840): Terminated: ok {rc=0}
14:35:27.039065 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=1837): Process ended prematurely: osmo-stp_10.42.42.5(pid=1837) [trial-2406↪gprs:oc2g↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1837)]  [trial-2406↪gprs:oc2g↪ping_idle_ping.py:27]
14:35:27.048224 tst             ping_idle_ping.py:27: Test FAILED (6.7 sec)
14:35:27.111196 run    osmo-hlr_10.42.42.2(pid=1834): ERR: Terminated: ERROR {rc=237}  [trial-2406↪gprs:oc2g↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1834)]
14:35:27.162505 run    osmo-hlr_10.42.42.2(pid=1834): stdout: 
| (launched: 2022-12-14_14:35:23.653904) 
14:35:27.214117 run    osmo-hlr_10.42.42.2(pid=1834): stderr: 
| �[0;m�[1;31m20221214143523854 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214143523854 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214143523855 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214143523855 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214143523855 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214143523855 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214143523867 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2406/run.2022-12-14_14-20-43/gprs:oc2g/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214143523875 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214143523876 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214143523876 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
14:35:27.258526 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1833): Terminating (SIGTERM)
14:35:27.300336 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1836): Terminating (SIGTERM)
14:35:27.342732 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1839): Terminating (SIGTERM)
14:35:27.352549 ---      ParallelTerminationStrategy: PID 1833 died...
14:35:27.408505 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1833): Terminated: ok {rc=0}
14:35:27.418816 ---      ParallelTerminationStrategy: PID 1836 died...
14:35:27.474127 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1836): Terminated: ok {rc=0}
14:35:27.484403 ---      ParallelTerminationStrategy: PID 1839 died...
14:35:27.539768 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1839): Terminated: ok {rc=0}
14:35:27.626898 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1837): Process ended prematurely: osmo-stp_10.42.42.5(pid=1837) [trial-2406↪gprs:oc2g↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1837)]