Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)

Failing for the past 270 builds (Since #2139 )
Took 9 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=3703): Process ended prematurely: osmo-stp_10.42.42.5(pid=3703) [trial-2406↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3703)]

Standard Output

----------------------------------------------
trial-2406 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
14:54:12.513020 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
14:54:12.526430 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
14:54:12.698436 tst                        iperf3.py: using LAC 41667
14:54:12.827794 tst                        iperf3.py: using RAC 102
14:54:12.954773 tst                        iperf3.py: using CellId 41667
14:54:13.082399 tst                        iperf3.py: using BVCI 41668
14:54:13.108614 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
14:54:13.121184 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
14:54:13.133534 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
14:54:13.146110 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
14:54:13.158807 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
14:54:13.171337 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
14:54:13.184337 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
14:54:13.196861 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
14:54:13.209917 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
14:54:13.511042 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
14:54:13.651150 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
14:54:14.009845 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3695): Launched
14:54:14.312502 run iperf3-srv_10.42.42.10(pid=3696): Launched
14:54:14.514183 tst                      iperf3.py:8: start network...
14:54:14.654561 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
14:54:15.223051 run          create_hlr_db(pid=3697): Launched
14:54:15.413578 bus                          /gobi_6: Setting Powered False
14:54:16.524507 run          create_hlr_db(pid=3697): Terminated: ok {rc=0}
14:54:17.069609 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3699): Launched
14:54:17.605107 run    osmo-hlr_10.42.42.2(pid=3700): Launched
14:54:17.788567 run              osmo-stp_10.42.42.5: Starting osmo-stp
14:54:18.485925 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3702): Launched
14:54:18.925514 run    osmo-stp_10.42.42.5(pid=3703): Launched
14:54:19.152636 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
14:54:19.754024 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3705): Launched
14:54:19.874383 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
14:54:20.182998 run               patchelf(pid=3706): Launched
14:54:20.381205 run    osmo-stp_10.42.42.5(pid=3703): ERR: Terminated: ERROR {rc=1}  [trial-2406↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3703)]
14:54:20.525720 run    osmo-stp_10.42.42.5(pid=3703): stdout: 
| (launched: 2022-12-14_14:54:18.657073)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
14:54:20.670922 run    osmo-stp_10.42.42.5(pid=3703): stderr: 
| �[0;m�[38;5;43m20221214145418961 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214145418961 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214145418961 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214145418962 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214145418962 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214145418962 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214145418962 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
14:54:20.809240 run    osmo-stp_10.42.42.5(pid=3703): stdout: 
| (launched: 2022-12-14_14:54:18.657073)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
14:54:20.947544 run    osmo-stp_10.42.42.5(pid=3703): stderr: 
| �[0;m�[38;5;43m20221214145418961 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221214145418961 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221214145418961 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221214145418962 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214145418962 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214145418962 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214145418962 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
14:54:21.108521 run               patchelf(pid=3706): Terminating (SIGINT)
14:54:21.297386 run               patchelf(pid=3706): Terminated: ok {rc=0}
14:54:21.332731 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=3703): Process ended prematurely: osmo-stp_10.42.42.5(pid=3703) [trial-2406↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3703)]  [trial-2406↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8]
14:54:21.344447 tst                      iperf3.py:8: Test FAILED (8.9 sec)
14:54:21.410453 run    osmo-hlr_10.42.42.2(pid=3700): ERR: Terminated: ERROR {rc=237}  [trial-2406↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3700)]
14:54:21.465814 run    osmo-hlr_10.42.42.2(pid=3700): stdout: 
| (launched: 2022-12-14_14:54:17.271929) 
14:54:21.520241 run    osmo-hlr_10.42.42.2(pid=3700): stderr: 
| �[0;m�[1;31m20221214145417634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221214145417634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221214145417636 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221214145417636 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221214145417636 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221214145417636 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221214145417657 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2406/run.2022-12-14_14-20-43/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221214145417669 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214145417669 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214145417669 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
14:54:21.568281 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3695): Terminating (SIGTERM)
14:54:21.614470 run iperf3-srv_10.42.42.10(pid=3696): Terminating (SIGTERM)
14:54:21.661700 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3699): Terminating (SIGTERM)
14:54:21.708021 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3702): Terminating (SIGTERM)
14:54:21.754271 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3705): Terminating (SIGTERM)
14:54:21.765591 ---      ParallelTerminationStrategy: PID 3695 died...
14:54:21.826401 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3695): Terminated: ok {rc=0}
14:54:21.837747 ---      ParallelTerminationStrategy: PID 3696 died...
14:54:21.895952 run iperf3-srv_10.42.42.10(pid=3696): Terminated {rc=256}
14:54:21.907029 ---      ParallelTerminationStrategy: PID 3699 died...
14:54:21.965133 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3699): Terminated: ok {rc=0}
14:54:21.976304 ---      ParallelTerminationStrategy: PID 3702 died...
14:54:22.035499 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3702): Terminated: ok {rc=0}
14:54:22.047338 ---      ParallelTerminationStrategy: PID 3705 died...
14:54:22.106543 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3705): Terminated: ok {rc=0}
14:54:22.198250 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3703): Process ended prematurely: osmo-stp_10.42.42.5(pid=3703) [trial-2406↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3703)]