{ "_class" : "hudson.model.FreeStyleBuild", "actions" : [ { "_class" : "hudson.model.CauseAction", "causes" : [ { "_class" : "hudson.triggers.TimerTrigger$TimerTriggerCause", "shortDescription" : "Started by timer" } ] }, { "_class" : "hudson.model.ParametersAction", "parameters" : [ { "_class" : "hudson.model.StringParameterValue", "name" : "OSMO_GSM_TESTER_BRANCH", "value" : "origin/master" }, { "_class" : "hudson.model.StringParameterValue", "name" : "OSMO_GSM_TESTER_OPTS", "value" : "-T" } ] }, { "_class" : "hudson.plugins.git.util.BuildData", "buildsByBranchName" : { "refs/remotes/origin/pespin/ttcn3" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 2590, "buildResult" : None, "marked" : { "SHA1" : "2be32ea554735da9f2ba9e39f2594fbc2284639b", "branch" : [ { "SHA1" : "2be32ea554735da9f2ba9e39f2594fbc2284639b", "name" : "refs/remotes/origin/pespin/ttcn3" } ] }, "revision" : { "SHA1" : "2be32ea554735da9f2ba9e39f2594fbc2284639b", "branch" : [ { "SHA1" : "2be32ea554735da9f2ba9e39f2594fbc2284639b", "name" : "refs/remotes/origin/pespin/ttcn3" } ] } }, "refs/remotes/origin/master" : { "_class" : "hudson.plugins.git.util.Build", "buildNumber" : 2762, "buildResult" : None, "marked" : { "SHA1" : "7aa14e45f455f87c1dfe9966d759093af9f6d6fc", "branch" : [ { "SHA1" : "7aa14e45f455f87c1dfe9966d759093af9f6d6fc", "name" : "refs/remotes/origin/master" } ] }, "revision" : { "SHA1" : "7aa14e45f455f87c1dfe9966d759093af9f6d6fc", "branch" : [ { "SHA1" : "7aa14e45f455f87c1dfe9966d759093af9f6d6fc", "name" : "refs/remotes/origin/master" } ] } } }, "lastBuiltRevision" : { "SHA1" : "7aa14e45f455f87c1dfe9966d759093af9f6d6fc", "branch" : [ { "SHA1" : "7aa14e45f455f87c1dfe9966d759093af9f6d6fc", "name" : "refs/remotes/origin/master" } ] }, "remoteUrls" : [ "git://git.osmocom.org/osmo-gsm-tester" ], "scmName" : "" }, { "_class" : "hudson.plugins.git.GitTagAction" }, { }, { }, { }, { "_class" : "hudson.tasks.junit.TestResultAction", "failCount" : 3, "skipCount" : 0, "totalCount" : 3, "urlName" : "testReport" }, { }, { "_class" : "org.jenkinsci.plugins.displayurlapi.actions.RunDisplayAction" } ], "artifacts" : [ { "displayPath" : "trial-2762-bin.tgz", "fileName" : "trial-2762-bin.tgz", "relativePath" : "trial-2762-bin.tgz" }, { "displayPath" : "trial-2762-run.tgz", "fileName" : "trial-2762-run.tgz", "relativePath" : "trial-2762-run.tgz" } ], "building" : False, "description" : None, "displayName" : "#2762", "duration" : 439440, "estimatedDuration" : 13713736, "executor" : None, "fullDisplayName" : "osmo-gsm-tester_ttcn3 #2762", "id" : "2762", "inProgress" : False, "keepLog" : False, "number" : 2762, "queueId" : 409782, "result" : "FAILURE", "timestamp" : 1614554340522, "url" : "https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_ttcn3/2762/", "builtOn" : "osmo-gsm-tester-prod", "changeSet" : { "_class" : "hudson.plugins.git.GitChangeSetList", "items" : [ { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "sysmocom/scenarios/mod-enb-cells-interenb-ho.conf" ], "commitId" : "e8ab10cb2262b407406053bc3dd6b2adf1cee4d7", "timestamp" : 1605169416000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/andre", "fullName" : "andre" }, "authorEmail" : "andre@softwareradiosystems.com", "comment" : "enb: add scenario file for inter-eNB HO with two cells\u000a\u000aChange-Id: I356a81814a2d7714a1a5252aa357257901fa6227\u000a", "date" : "2020-11-12 09:23:36 +0100", "id" : "e8ab10cb2262b407406053bc3dd6b2adf1cee4d7", "msg" : "enb: add scenario file for inter-eNB HO with two cells", "paths" : [ { "editType" : "add", "file" : "sysmocom/scenarios/mod-enb-cells-interenb-ho.conf" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "sysmocom/scenarios/mod-enb-cells-intraenb-intrafreq-ho.conf", "sysmocom/scenarios/mod-enb-cells-intra-freq-ho.conf", "sysmocom/scenarios/mod-enb-cells-inter-freq-ho.conf" ], "commitId" : "76021babc7353f87d4251345bd44d4a42e8abac3", "timestamp" : 1605869443000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/andre", "fullName" : "andre" }, "authorEmail" : "andre@softwareradiosystems.com", "comment" : "cell_modifiers: refactor HO cell configs\u000a\u000a* rename intrafreq vs intraenb\u000a* add missing mandatory params\u000a\u000aChange-Id: Icc1fe5c1711ecbed2f1b8b1e6a0b51c2d28ec651\u000a", "date" : "2020-11-20 11:50:43 +0100", "id" : "76021babc7353f87d4251345bd44d4a42e8abac3", "msg" : "cell_modifiers: refactor HO cell configs", "paths" : [ { "editType" : "add", "file" : "sysmocom/scenarios/mod-enb-cells-intraenb-intrafreq-ho.conf" }, { "editType" : "delete", "file" : "sysmocom/scenarios/mod-enb-cells-intra-freq-ho.conf" }, { "editType" : "delete", "file" : "sysmocom/scenarios/mod-enb-cells-inter-freq-ho.conf" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/obj/enb_srs.py", "src/osmo_gsm_tester/templates/srsue.conf.tmpl", "src/osmo_gsm_tester/core/schema.py", "src/osmo_gsm_tester/templates/srsenb_sib.conf.tmpl", "sysmocom/scenarios/cfg-enb-enable-ul-qam64.conf" ], "commitId" : "3166b6353e7e2c5eff29730f4a08184118825d91", "timestamp" : 1605869443000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/andre", "fullName" : "andre" }, "authorEmail" : "andre@softwareradiosystems.com", "comment" : "enb: add QAM64 support for UL\u000a\u000a* add new UE feature\u000a* enable in srsue.conf.templ\u000a* add new table for maximum rates\u000a* add config scenario to enable SIB option for QAM64\u000a\u000aChange-Id: I6ac2c9989a761e91b93d76c2507f55f0140b202d\u000a", "date" : "2020-11-20 11:50:43 +0100", "id" : "3166b6353e7e2c5eff29730f4a08184118825d91", "msg" : "enb: add QAM64 support for UL", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/templates/srsenb_sib.conf.tmpl" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/templates/srsue.conf.tmpl" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/core/schema.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/enb_srs.py" }, { "editType" : "add", "file" : "sysmocom/scenarios/cfg-enb-enable-ul-qam64.conf" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "sysmocom/scenarios/mod-2enb-nprb@.conf" ], "commitId" : "25bc1e07e45bb6e5ed2048ce0da4f1637f38144e", "timestamp" : 1605873787000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/andre", "fullName" : "andre" }, "authorEmail" : "andre@softwareradiosystems.com", "comment" : "add scenario to modify bandwith of 2 eNB objects\u000a\u000arequired for Inter-eNB HO configs, for example.\u000a\u000aChange-Id: Iaf053941ff31c4ba94edf67fc54c0f1c1441577d\u000a", "date" : "2020-11-20 13:03:07 +0100", "id" : "25bc1e07e45bb6e5ed2048ce0da4f1637f38144e", "msg" : "add scenario to modify bandwith of 2 eNB objects", "paths" : [ { "editType" : "add", "file" : "sysmocom/scenarios/mod-2enb-nprb@.conf" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/obj/ms_amarisoft.py", "src/osmo_gsm_tester/templates/amarisoft_lteue.cfg.tmpl", "sysmocom/scenarios/cfg-ms-count@.conf", "sysmocom/defaults.conf", "src/osmo_gsm_tester/obj/ms.py" ], "commitId" : "65a9e741ad489abcb69b146e500f13706a5a4535", "timestamp" : 1606131232000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/andre", "fullName" : "andre" }, "authorEmail" : "andre@softwareradiosystems.com", "comment" : "ms_amarisoft: fix various regressions\u000a\u000athis patch fixes some regressions in the Amarisoft UE class,\u000athe config template, etc. that have been undetected bc we never\u000aexecuted tests with it.\u000a\u000aChange-Id: I397e675a4018acf3372a3b7e29fd864703b2b919\u000a", "date" : "2020-11-23 12:33:52 +0100", "id" : "65a9e741ad489abcb69b146e500f13706a5a4535", "msg" : "ms_amarisoft: fix various regressions", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/templates/amarisoft_lteue.cfg.tmpl" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/ms_amarisoft.py" }, { "editType" : "add", "file" : "sysmocom/scenarios/cfg-ms-count@.conf" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/ms.py" }, { "editType" : "edit", "file" : "sysmocom/defaults.conf" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "contrib/jenkins-build-amarisoft.sh" ], "commitId" : "a07af115fef4cdf25a9d57bfe8f2576457b8f232", "timestamp" : 1606742830000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/andre", "fullName" : "andre" }, "authorEmail" : "andre@softwareradiosystems.com", "comment" : "jenkins-build-amarisoft.sh: set symlink to srslte_rf lib\u000a\u000aChange-Id: Ifc8e5ba0dd59fb92cdf22f2a18acea904e2153f7\u000a", "date" : "2020-11-30 14:27:10 +0100", "id" : "a07af115fef4cdf25a9d57bfe8f2576457b8f232", "msg" : "jenkins-build-amarisoft.sh: set symlink to srslte_rf lib", "paths" : [ { "editType" : "edit", "file" : "contrib/jenkins-build-amarisoft.sh" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/external/gnuradio_zmq_broker_remote.py" ], "commitId" : "b33f36b9fb68c93135ed063e7b389203548e5764", "timestamp" : 1606742830000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/andre", "fullName" : "andre" }, "authorEmail" : "andre@softwareradiosystems.com", "comment" : "gnuradio_zmq_broker_remote: fix eNB port mapping for carrier aggregation\u000a\u000athe mapping of ports didn't consider when a eNB had two ports for\u000adifferent EARFCNs\u000a\u000aChange-Id: I5548f67a3b37b03482e4b6172828fcd891e704a5\u000a", "date" : "2020-11-30 14:27:10 +0100", "id" : "b33f36b9fb68c93135ed063e7b389203548e5764", "msg" : "gnuradio_zmq_broker_remote: fix eNB port mapping for carrier aggregation", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/external/gnuradio_zmq_broker_remote.py" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/obj/run_node.py", "src/osmo_gsm_tester/core/process.py", "src/osmo_gsm_tester/core/remote.py" ], "commitId" : "2af2b15e2e7105581d21734d351653f70c6863d1", "timestamp" : 1606753971000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/pespin", "fullName" : "Pau Espin Pedrol" }, "authorEmail" : "pespin@sysmocom.de", "comment" : "Process: Add remote_port as new parameter\u000a\u000aremote_port defines a custom/additional port for\u000aconnections over ssh. It may be used in case several\u000assh instances share one IP address.\u000a\u000aChange-Id: I2c93fd2ea1c10c333d00eafd3c1066c35796e398\u000a", "date" : "2020-11-30 16:32:51 +0000", "id" : "2af2b15e2e7105581d21734d351653f70c6863d1", "msg" : "Process: Add remote_port as new parameter", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/run_node.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/core/process.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/core/remote.py" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "sysmocom/resources.conf.prod" ], "commitId" : "2bd357cf021d4fa49ba5dedc90c314e3ffa8ed94", "timestamp" : 1606953731000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/neels", "fullName" : "Neels Hofmeyr" }, "authorEmail" : "neels@hofmeyr.de", "comment" : "prod: after hardware move, adjust modem pci for sierra_1st and sierra_2nd (ONLY TWO)\u000a\u000aDoing only the first two modems so far because I need them for handover\u000aruns. The other modems are still todo!\u000a\u000aChange-Id: Ibd71acfc76c01ffd105abe5effc1d246b1e65f85\u000a", "date" : "2020-12-03 01:02:11 +0100", "id" : "2bd357cf021d4fa49ba5dedc90c314e3ffa8ed94", "msg" : "prod: after hardware move, adjust modem pci for sierra_1st and sierra_2nd (ONLY TWO)", "paths" : [ { "editType" : "edit", "file" : "sysmocom/resources.conf.prod" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "contrib/jenkins-build-osmo-pcu-sysmo.sh", "contrib/jenkins-build-osmo-pcu-oc2g.sh" ], "commitId" : "92ebea1dc113298c7aea126e64e8e6795ab9f3c1", "timestamp" : 1607344997000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/pespin", "fullName" : "Pau Espin Pedrol" }, "authorEmail" : "pespin@espeweb.net", "comment" : "contrib: Disable libmnl dependency cross-compiling osmo-pcu\u000a\u000aOnly newest OE SDKs have libmnl added, but we don't need this feature\u000aanyway, so let's disable it in order to get builds running fine again.\u000a\u000aChange-Id: Id3b30d0b183cd21fd6df89fdda5581ab58c7a9a5\u000a", "date" : "2020-12-07 13:43:17 +0100", "id" : "92ebea1dc113298c7aea126e64e8e6795ab9f3c1", "msg" : "contrib: Disable libmnl dependency cross-compiling osmo-pcu", "paths" : [ { "editType" : "edit", "file" : "contrib/jenkins-build-osmo-pcu-oc2g.sh" }, { "editType" : "edit", "file" : "contrib/jenkins-build-osmo-pcu-sysmo.sh" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "contrib/jenkins-build-osmo-bts-oc2g.sh", "contrib/jenkins-build-osmo-bts-sysmo.sh" ], "commitId" : "8d27b184808188124c780e31ed26ce21b2e11f02", "timestamp" : 1607425327000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/pespin", "fullName" : "Pau Espin Pedrol" }, "authorEmail" : "pespin@espeweb.net", "comment" : "contrib: Disable libmnl dependency cross-compiling osmo-bts\u000a\u000aOnly newest OE SDKs have libmnl added, but we don't need this feature\u000aanyway, so let's disable it in order to get builds running fine again.\u000a\u000aChange-Id: Ief9cbca6e10b1ed6acf6e079f660fc3f7c863c7b\u000a", "date" : "2020-12-08 12:02:07 +0100", "id" : "8d27b184808188124c780e31ed26ce21b2e11f02", "msg" : "contrib: Disable libmnl dependency cross-compiling osmo-bts", "paths" : [ { "editType" : "edit", "file" : "contrib/jenkins-build-osmo-bts-oc2g.sh" }, { "editType" : "edit", "file" : "contrib/jenkins-build-osmo-bts-sysmo.sh" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "selftest/suite_test/suite_test.ok", "src/osmo_gsm_tester/templates/osmo-trx.cfg.tmpl", "src/osmo_gsm_tester/templates/osmo-bts-virtual.cfg.tmpl", "src/osmo_gsm_tester/templates/osmo-mgcpgw.cfg.tmpl", "src/osmo_gsm_tester/templates/osmo-sgsn.cfg.tmpl", "src/osmo_gsm_tester/templates/osmo-bts-oc2g.cfg.tmpl", "src/osmo_gsm_tester/templates/osmo-stp.cfg.tmpl", "src/osmo_gsm_tester/templates/osmo-bts-trx.cfg.tmpl", "src/osmo_gsm_tester/templates/osmo-bsc.cfg.tmpl", "src/osmo_gsm_tester/templates/osmo-pcu-sysmo.cfg.tmpl", "src/osmo_gsm_tester/templates/osmo-bts-octphy.cfg.tmpl", "src/osmo_gsm_tester/templates/osmo-pcu.cfg.tmpl", "src/osmo_gsm_tester/templates/osmo-bts-sysmo.cfg.tmpl", "src/osmo_gsm_tester/templates/osmo-pcu-oc2g.cfg.tmpl", "src/osmo_gsm_tester/templates/osmo-hlr.cfg.tmpl", "src/osmo_gsm_tester/templates/osmo-ggsn.cfg.tmpl", "src/osmo_gsm_tester/templates/osmo-msc.cfg.tmpl" ], "commitId" : "b5a3d6732a04e149c7acba6b277d41c41f55e662", "timestamp" : 1607641407000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/neels", "fullName" : "Neels Hofmeyr" }, "authorEmail" : "nhofmeyr@sysmocom.de", "comment" : "cfg templates: log level and source basename last, log no category-hex\u000a\u000aMakes for saner log output in stderr files.\u000a\u000aChange-Id: I2755beffd18d6779367c04e4aaaed119d66eb3be\u000a", "date" : "2020-12-10 23:03:27 +0000", "id" : "b5a3d6732a04e149c7acba6b277d41c41f55e662", "msg" : "cfg templates: log level and source basename last, log no category-hex", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/templates/osmo-bts-oc2g.cfg.tmpl" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/templates/osmo-pcu-oc2g.cfg.tmpl" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/templates/osmo-bts-trx.cfg.tmpl" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/templates/osmo-bts-virtual.cfg.tmpl" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/templates/osmo-bsc.cfg.tmpl" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/templates/osmo-sgsn.cfg.tmpl" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/templates/osmo-ggsn.cfg.tmpl" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/templates/osmo-msc.cfg.tmpl" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/templates/osmo-pcu-sysmo.cfg.tmpl" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/templates/osmo-bts-octphy.cfg.tmpl" }, { "editType" : "edit", "file" : "selftest/suite_test/suite_test.ok" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/templates/osmo-stp.cfg.tmpl" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/templates/osmo-bts-sysmo.cfg.tmpl" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/templates/osmo-trx.cfg.tmpl" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/templates/osmo-mgcpgw.cfg.tmpl" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/templates/osmo-hlr.cfg.tmpl" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/templates/osmo-pcu.cfg.tmpl" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/obj/osmo_vty.py" ], "commitId" : "106865a75f60f0586dcd85363efa8e14acc4c37f", "timestamp" : 1607642353000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/neels", "fullName" : "Neels Hofmeyr" }, "authorEmail" : "neels@hofmeyr.de", "comment" : "add osmo_vty.py\u000a\u000aTo trigger manual handovers, I need a VTY interface. The non-trivial\u000aparts of this are copied from osmo-python-tests osmo_interact_vty.py.\u000a\u000aWill be used in the upcoming handover_2G test suite in\u000aI0b2671304165a1aaae2b386af46fbd8b098e3bd8.\u000a\u000aChange-Id: I7c17b143b7c690b8c4105ee7c6272670046fa91d\u000a", "date" : "2020-12-11 00:19:13 +0100", "id" : "106865a75f60f0586dcd85363efa8e14acc4c37f", "msg" : "add osmo_vty.py", "paths" : [ { "editType" : "add", "file" : "src/osmo_gsm_tester/obj/osmo_vty.py" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/testenv.py", "src/osmo_gsm_tester/obj/osmo_vty.py", "src/osmo_gsm_tester/obj/bsc_osmo.py" ], "commitId" : "af4e2317dc904a31f4ec756c63d2a16830a72d3d", "timestamp" : 1607642353000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/neels", "fullName" : "Neels Hofmeyr" }, "authorEmail" : "neels@hofmeyr.de", "comment" : "add bsc.vty: always keep a BSC VTY connection ready\u000a\u000aThe BSC's VTY port will be used to trigger manual handover, and to\u000aretrieve a list of active lchans from the BSC, in the upcoming\u000ahandover_2G test suite, I0b2671304165a1aaae2b386af46fbd8b098e3bd8.\u000a\u000aChange-Id: I06652db04fc9e48748f3c2196334f5352e9cc48a\u000a", "date" : "2020-12-11 00:19:13 +0100", "id" : "af4e2317dc904a31f4ec756c63d2a16830a72d3d", "msg" : "add bsc.vty: always keep a BSC VTY connection ready", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/bsc_osmo.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/osmo_vty.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/testenv.py" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/obj/bsc_osmo.py" ], "commitId" : "ca155b6c37e16cdcdfd8fa95c4f2ada30b0b3270", "timestamp" : 1607642353000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/neels", "fullName" : "Neels Hofmeyr" }, "authorEmail" : "neels@hofmeyr.de", "comment" : "bsc: add active lchan matching via vty\u000a\u000aWill be used in upcoming handover_2G test suite in\u000aI0b2671304165a1aaae2b386af46fbd8b098e3bd8, which needs to verify that a\u000ahandover actually ended up on the expected lchan.\u000a\u000aChange-Id: I03df8f3ae2ee47930eee311c7ce104c36dbb3154\u000a", "date" : "2020-12-11 00:19:13 +0100", "id" : "ca155b6c37e16cdcdfd8fa95c4f2ada30b0b3270", "msg" : "bsc: add active lchan matching via vty", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/bsc_osmo.py" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/obj/bts.py" ], "commitId" : "aa67f950273195c723d982ec2ce07e9f62b0f781", "timestamp" : 1607642353000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/neels", "fullName" : "Neels Hofmeyr" }, "authorEmail" : "neels@hofmeyr.de", "comment" : "bts: allow configuring ARFCN and BSIC: add to schema\u000a\u000aresources.conf is already allowed to set these, but in order to let\u000ascenarios and suites modify these values, they need to be in the schema.\u000a\u000aChange-Id: I8e0583e9208d563c66b0bdc9f25b1b74f92403c2\u000a", "date" : "2020-12-11 00:19:13 +0100", "id" : "aa67f950273195c723d982ec2ce07e9f62b0f781", "msg" : "bts: allow configuring ARFCN and BSIC: add to schema", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/bts.py" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/core/report.py" ], "commitId" : "7d79ea4d2a4f755850054149af6feb21303fca6c", "timestamp" : 1607642353000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/neels", "fullName" : "Neels Hofmeyr" }, "authorEmail" : "neels@hofmeyr.de", "comment" : "log passed tests\u000a\u000aIn the end of a test suite, do not omit the passed tests. For example,\u000arunning handover against N BTS combinations, it was hard to summarize\u000awhich BTS models actually succeeded, with only the failures listed.\u000a\u000aBesides the \"FAIL\" listings, now print something like this in the end:\u000a\u000a PASS: handover:sysmo+secondbts-trx-b200 (pass: 1)\u000a pass: handover.py (198.8 sec)\u000a PASS: handover:sysmo+secondbts-trx-umtrx (pass: 1)\u000a pass: handover.py (192.7 sec)\u000a PASS: handover:trx-b200+secondbts-trx-umtrx (pass: 1)\u000a pass: handover.py (193.1 sec)\u000a\u000aChange-Id: Ib85a5b90e267c2ed2f844691187ecadc8939b1bb\u000a", "date" : "2020-12-11 00:19:13 +0100", "id" : "7d79ea4d2a4f755850054149af6feb21303fca6c", "msg" : "log passed tests", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/core/report.py" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/core/resource.py", "selftest/suite_test/suite_test.ok", "src/osmo_gsm_tester/core/suite.py" ], "commitId" : "f07114f9e2637cc10e5db664c3c6199e9a8d6233", "timestamp" : 1607642353000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/neels", "fullName" : "Neels Hofmeyr" }, "authorEmail" : "neels@hofmeyr.de", "comment" : "log reserved resources\u000a\u000aOn non-debug log level, show something like this at the beginning of\u000aeach suite:\u000a\u000a 03:45:49.439720 tst handover:sysmo+secondbts-trx-b200: RESERVED RESOURCES for handover:\u000a bts\u000a sysmoBTS 1002\u000a Ettus B200\u000a ip_address\u000a 10.42.42.2\u000a 10.42.42.3\u000a 10.42.42.4\u000a 10.42.42.5\u000a 10.42.42.6\u000a 10.42.42.7\u000a modem\u000a sierra_1st\u000a sierra_2nd\u000a\u000aChange-Id: Ic23556eafee654c93d13c5ef405028da09bd51d7\u000a", "date" : "2020-12-11 00:19:13 +0100", "id" : "f07114f9e2637cc10e5db664c3c6199e9a8d6233", "msg" : "log reserved resources", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/core/resource.py" }, { "editType" : "edit", "file" : "selftest/suite_test/suite_test.ok" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/core/suite.py" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "selftest/resource_test/resource_test.ok", "sysmocom/resources.conf.prod", "sysmocom/defaults.conf", "selftest/resource_test/resource_test.py", "sysmocom/resources.conf.rnd", "src/osmo_gsm_tester/obj/bts_oc2g.py", "src/osmo_gsm_tester/core/schema.py", "src/osmo_gsm_tester/obj/bts_nanobts.py", "selftest/resource_test/conf/resources.conf", "selftest/suite_test/resources.conf" ], "commitId" : "ecce402f43b708bf178d603e2bd8587e72fdb3b1", "timestamp" : 1607642353000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/neels", "fullName" : "Neels Hofmeyr" }, "authorEmail" : "neels@hofmeyr.de", "comment" : "configure fixed ARFCN per bts\u000a\u000aRemove ARFCNs as a concept from resource pool, assign a fixed ARFCN to\u000aeach BTS and TRX in the resource pools.\u000a\u000aUsing ARFCNs on specific bands as resources was an idea that is hard to\u000aimplement, because specific BTS dictate selection of bands which\u000ainfluences which ARFCNs can be picked. That means reserving ARFCN\u000aresources is only possible after reserving specific BTS resources, but\u000athe tester is currently not capable of such two-stage resolution.\u000a\u000aWriting handover tests, I got the problem that both BTS in a scenario\u000aattempt to use the same ARFCN.\u000a\u000aThe by far easiest solution is to assign one fixed ARFCN to each BTS and\u000aTRX. If ever needed, a scenario modifier can still configure different\u000aARFCNs.\u000a\u000a(Due to uncertainty about OC2G operation stability, I prefer to leave\u000aOC2G on ARFCN 50, as it happened to end up being configured before this\u000apatch.)\u000a\u000aChange-Id: I0a6c60544226f4261f9106013478d6a27fc39f38\u000a", "date" : "2020-12-11 00:19:13 +0100", "id" : "ecce402f43b708bf178d603e2bd8587e72fdb3b1", "msg" : "configure fixed ARFCN per bts", "paths" : [ { "editType" : "edit", "file" : "selftest/suite_test/resources.conf" }, { "editType" : "edit", "file" : "sysmocom/resources.conf.prod" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/bts_nanobts.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/bts_oc2g.py" }, { "editType" : "edit", "file" : "selftest/resource_test/resource_test.ok" }, { "editType" : "edit", "file" : "selftest/resource_test/resource_test.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/core/schema.py" }, { "editType" : "edit", "file" : "sysmocom/defaults.conf" }, { "editType" : "edit", "file" : "sysmocom/resources.conf.rnd" }, { "editType" : "edit", "file" : "selftest/resource_test/conf/resources.conf" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/core/process.py" ], "commitId" : "fc38393f8278d0ca6db904be142efaa91af7cca3", "timestamp" : 1607642353000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/neels", "fullName" : "Neels Hofmeyr" }, "authorEmail" : "neels@hofmeyr.de", "comment" : "process: add get_output_mark() and grep_output()\u000a\u000aAllow showing log lines matching specific regexes, from a specific start\u000apoint of a log.\u000a\u000aMy use case is to echo the handover related logging after an expected\u000ahandover failed, so that the reason is visible already in the console\u000aoutput of a jenkins run. So far I would need to open the endless bsc log\u000aand look up the matching place in it to get a conclusion about why a\u000ahandover failed.\u000a\u000aChange-Id: Ib6569f7486e9d961bd79a5f24232e58d053667a1\u000a", "date" : "2020-12-11 00:19:13 +0100", "id" : "fc38393f8278d0ca6db904be142efaa91af7cca3", "msg" : "process: add get_output_mark() and grep_output()", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/core/process.py" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "selftest/suite_test/suite_test.ok", "src/osmo_gsm_tester/core/test.py", "src/osmo_gsm_tester/core/log.py" ], "commitId" : "081e89f477d3a0209d1dddb652040c43b2b0b6ca", "timestamp" : 1607642353000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/neels", "fullName" : "Neels Hofmeyr" }, "authorEmail" : "neels@hofmeyr.de", "comment" : "fix: line nr in test name in wrong places\u000a\u000atest.Test() overrides name() in order to provide source line number\u000ainformation. However, overriding name() is the wrong place for that, as\u000aname() is also often used for identifying an object - when listing the\u000atests of a suite, the line number should not appear in the test name.\u000aFor example, the line number sometimes ends up in the test results in\u000ajenkins, making 'foo.py' and 'foo.py:23' two distinct report items.\u000a\u000aInstead, add a separate function Origin.src() that defaults to name(),\u000abut specific classes can override src() if they wish to provide more\u000adetailed information with the object name.\u000a\u000aOverride src() in Test, not name().\u000a\u000aUse src() in backtraces.\u000a\u000aThe suite_test.ok shows that the backtracing in the log remains\u000aunchanged, but the place where the test name is printed is corrected:\u000a I am 'test_suite' / 'hello_world.py:23'\u000abecomes\u000a I am 'test_suite' / 'hello_world.py'\u000a(Notice that \"[LINENR]\" in suite_test.ok is a masking of an actual\u000anumber, done within the selftest suite)\u000a\u000aChange-Id: I0c4698fa2b3db3de777d8b6dcdcee84e433c62b7\u000a", "date" : "2020-12-11 00:19:13 +0100", "id" : "081e89f477d3a0209d1dddb652040c43b2b0b6ca", "msg" : "fix: line nr in test name in wrong places", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/core/test.py" }, { "editType" : "edit", "file" : "selftest/suite_test/suite_test.ok" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/core/log.py" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "selftest/suite_test/suite_test.ok", "selftest/suite_test/suitedirB/suiteC/test_template_overlay.py", "selftest/template_test/template_test.py", "selftest/template_test/template_test.ok" ], "commitId" : "112da03e98048374020ef2a41f9bb6f77f1ad447", "timestamp" : 1607642353000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/neels", "fullName" : "Neels Hofmeyr" }, "authorEmail" : "neels@hofmeyr.de", "comment" : "typo / newline in selftest log output\u000a\u000a...because it otherwise causes confusing selftest log changes in\u000aupcoming I0972c66b9165bd7f2b0b387e0335172849199193\u000a\u000aChange-Id: I1eec31c5baba5ef33d0c8441b1e94a00d79af9bf\u000a", "date" : "2020-12-11 00:19:13 +0100", "id" : "112da03e98048374020ef2a41f9bb6f77f1ad447", "msg" : "typo / newline in selftest log output", "paths" : [ { "editType" : "edit", "file" : "selftest/template_test/template_test.ok" }, { "editType" : "edit", "file" : "selftest/template_test/template_test.py" }, { "editType" : "edit", "file" : "selftest/suite_test/suite_test.ok" }, { "editType" : "edit", "file" : "selftest/suite_test/suitedirB/suiteC/test_template_overlay.py" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "selftest/suite_test/suite_test.ok", "src/osmo_gsm_tester/testenv.py", "src/osmo_gsm_tester/core/test.py", "src/osmo_gsm_tester/core/log.py" ], "commitId" : "3b493f35678a574a06dfbece61a2deda1bcc73ad", "timestamp" : 1607642353000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/neels", "fullName" : "Neels Hofmeyr" }, "authorEmail" : "neels@hofmeyr.de", "comment" : "do not redirect_stdout in test scripts\u000a\u000aIn a test, I called print() on a multi-line string and saw the log\u000ashowing each line 0.2 seconds apart. redirect.stdout seems to be pretty\u000ainefficient.\u000a\u000aInstead, put a print() function into the testenv, to directly call log()\u000aon the strings passed to print().\u000a\u000aThe initial idea for redirect_stdout was that we could print() in any\u000adeeper functions called from a test script. But we have no such nested\u000aprint() anywhere, only in test scripts themselves.\u000a\u000aAs a result of this, a multi-line print() in test scripts now no longer\u000aputs the log prefix (timestamp, test name...) and suffix (backtrace /\u000asource position) to each single line, but prints the multiline block\u000abetween a single log prefix and suffix -- exactly like the log()\u000afunction does everywhere else.\u000a\u000aI actually briefly implemented adding the log prefix to each separate\u000aline everywhere, but decided that it is not a good idea: in some places\u000awe log config file snippets and other lists, and prepending the log\u000aprefix to each line makes pasting such a snippet from (say) a jenkins\u000alog super cumbersome. And the log prefix (backtrace) attached on each\u000aseparate line makes multiline blocks very noisy, unreadable.\u000a\u000aChange-Id: I0972c66b9165bd7f2b0b387e0335172849199193\u000a", "date" : "2020-12-11 00:19:13 +0100", "id" : "3b493f35678a574a06dfbece61a2deda1bcc73ad", "msg" : "do not redirect_stdout in test scripts", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/core/test.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/core/log.py" }, { "editType" : "edit", "file" : "selftest/suite_test/suite_test.ok" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/testenv.py" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/core/process.py" ], "commitId" : "e5e5df8d24041d4c99705067d042d402d8f47c23", "timestamp" : 1607642353000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/neels", "fullName" : "Neels Hofmeyr" }, "authorEmail" : "neels@hofmeyr.de", "comment" : "log: process.py: fix weird space in stdout/stderr log output\u000a\u000aLog output before:\u000a\u000a stdout:\u000a | line1\u000a | line2\u000a | line3\u000a\u000aAfter:\u000a\u000a stdout:\u000a | line1\u000a | line2\u000a | line3\u000a\u000aChange-Id: I4202e7dfbb550acaf55a6c6487fc07819ab18b94\u000a", "date" : "2020-12-11 00:19:13 +0100", "id" : "e5e5df8d24041d4c99705067d042d402d8f47c23", "msg" : "log: process.py: fix weird space in stdout/stderr log output", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/core/process.py" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/core/log.py", "src/osmo_gsm_tester/core/test.py" ], "commitId" : "12ed99628cf1c5b3bb91e948cb290bc5f27bad98", "timestamp" : 1607642353000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/neels", "fullName" : "Neels Hofmeyr" }, "authorEmail" : "neels@hofmeyr.de", "comment" : "implement test.get_log_output()\u000a\u000aRetrieve a test's own logging. The aim is to provide logging belonging\u000ato a given report fragment in the junit XML output, will be used by\u000aupcoming test.report_fragment() feature.\u000a\u000aChange-Id: Idfa0a45f3e6a18dd4fe692e81d732c70b5cffb76\u000a", "date" : "2020-12-11 00:19:13 +0100", "id" : "12ed99628cf1c5b3bb91e948cb290bc5f27bad98", "msg" : "implement test.get_log_output()", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/core/log.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/core/test.py" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "selftest/suite_test/suite_test.ok", "src/osmo_gsm_tester/core/test.py", "selftest/suite_test/suitedirA/test_suite/test_report_fragment.py", "selftest/suite_test/suite_test.ok.ign", "selftest/suite_test/suite_test.py", "src/osmo_gsm_tester/core/report.py" ], "commitId" : "9596b210c5f1d7601d8939ed71e5e18ccde4c652", "timestamp" : 1607642353000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/neels", "fullName" : "Neels Hofmeyr" }, "authorEmail" : "neels@hofmeyr.de", "comment" : "add test.report_fragment()\u000a\u000aAllow enriching the junit output with arbitrary subtasks within a test.\u000a\u000aThe current aim is, for handover tests, to not just show that a test\u000afailed, but to show exactly which steps worked and which didn't, e.g.:\u000a\u000a handover.py/01_bts0_started PASSED\u000a handover.py/02.1_ms0_attach PASSED\u000a handover.py/02.2_ms1_attach PASSED\u000a handover.py/02.3_subscribed_in_msc PASSED\u000a handover.py/03_call_established PASSED\u000a handover.py/04.1_bts1_started FAILED\u000a\u000aIn this case it is immediately obvious from looking at the jenkins\u000aresults analyzer that bts1 is the cause of the test failure, and it is\u000avisible which parts of the test are flaky, over time.\u000a\u000aFirst user Will be the upcoming handover_2G suite, in\u000aI0b2671304165a1aaae2b386af46fbd8b098e3bd8.\u000a\u000aChange-Id: I4ca9100b6f8db24d1f7e0a09b3b7ba88b8ae3b59\u000a", "date" : "2020-12-11 00:19:13 +0100", "id" : "9596b210c5f1d7601d8939ed71e5e18ccde4c652", "msg" : "add test.report_fragment()", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/core/test.py" }, { "editType" : "edit", "file" : "selftest/suite_test/suite_test.ok" }, { "editType" : "add", "file" : "selftest/suite_test/suitedirA/test_suite/test_report_fragment.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/core/report.py" }, { "editType" : "edit", "file" : "selftest/suite_test/suite_test.ok.ign" }, { "editType" : "edit", "file" : "selftest/suite_test/suite_test.py" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/core/log.py", "src/osmo_gsm_tester/core/report.py" ], "commitId" : "16c8be41c97e5fa7395ca9d83a7562c162e456d1", "timestamp" : 1607642353000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/neels", "fullName" : "Neels Hofmeyr" }, "authorEmail" : "neels@hofmeyr.de", "comment" : "report fragment: strip ansi colors from junit XML\u000a\u000aJenkins does support showing ANSI colors on the web, but apparently not\u000ain the junit results output. Strip ansi colors from report fragment\u000a text, to make it less annoying to read those on jenkins.\u000a\u000aChange-Id: I656ecc23bbfd3f25bdf012c890e0c998168844d3\u000a", "date" : "2020-12-11 00:19:13 +0100", "id" : "16c8be41c97e5fa7395ca9d83a7562c162e456d1", "msg" : "report fragment: strip ansi colors from junit XML", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/core/report.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/core/log.py" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/obj/osmo_ctrl.py" ], "commitId" : "05439d70296533e79cfe23e7136e4e7a636bc233", "timestamp" : 1607642353000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/neels", "fullName" : "Neels Hofmeyr" }, "authorEmail" : "neels@hofmeyr.de", "comment" : "ctrl: set socket timeout\u000a\u000aThe blocking CTRL socket must have a timeout.\u000a\u000aSo far we have always been reading from the CTRL socket in a blocking\u000away. So far we are always lucky that we are indeed getting a response to\u000areceive. Should the CTRL interface ever fail to answer, the tester would\u000abe stuck infinitely.\u000a\u000aChange-Id: I20091daf13981dc3d0d894af5a65c23f4db0471d\u000a", "date" : "2020-12-11 00:19:13 +0100", "id" : "05439d70296533e79cfe23e7136e4e7a636bc233", "msg" : "ctrl: set socket timeout", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/osmo_ctrl.py" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/obj/osmo_ctrl.py" ], "commitId" : "f79a86fc2583be35d35bd7e7cee3899dd8d55b1f", "timestamp" : 1607642353000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/neels", "fullName" : "Neels Hofmeyr" }, "authorEmail" : "neels@hofmeyr.de", "comment" : "ctrl: increment message IDs for CTRL commands\u000a\u000aImplicitly use distinct IDs for CTRL commands. This is a prerequisite\u000afor matching GET_REPLY IDs to GET IDs, to correctly handle CTRL\u000aresponses without counting on being lucky.\u000a\u000aRather use 'use_id' as var name instead of overloading the 'id' keyword.\u000a\u000aChange-Id: I698faa013eb14f88759685d50d925f5d82d80aa0\u000a", "date" : "2020-12-11 00:19:13 +0100", "id" : "f79a86fc2583be35d35bd7e7cee3899dd8d55b1f", "msg" : "ctrl: increment message IDs for CTRL commands", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/osmo_ctrl.py" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/obj/msc_osmo.py", "src/osmo_gsm_tester/obj/nitb_osmo.py", "src/osmo_gsm_tester/obj/osmo_ctrl.py", "src/osmo_gsm_tester/obj/bsc_osmo.py" ], "commitId" : "5b04ef213e8934e4bdf972bd1809ee86742f613d", "timestamp" : 1607643038000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/neels", "fullName" : "Neels Hofmeyr" }, "authorEmail" : "neels@hofmeyr.de", "comment" : "OsmoCtrl cleanup: get_var(), set_var(), get_trap()\u000a\u000aCTRL interface interaction was mostly inherited from the first legacy\u000aimplementation of osmo-gsm-tester, and it was a pain to look at from the\u000astart. Now, while I'm close to the topic, I want this to improve:\u000a\u000aProperly match a GET_REPLY/SET_REPLY to a sent GET/SET by the message\u000aID.\u000a\u000aCompletely drop the do_get() and do_set(), which were not useful for\u000acorrect handling of the CTRL request and response messaging. The API to\u000ause by callers is set_var(), get_var()/get_int_var() and get_trap().\u000aThese call the internal _sendrecv() (or for TRAP only _recv())\u000afunctions. Make it so that tese work both on an already connected\u000aOsmoCtrl, as well as one that needs to establish a (short) connection,\u000aso that both are trivially possible:\u000a\u000a # one CTRL connection stays open\u000a with OsmoCtrl(...) as ctrl:\u000a \u0009ctrl.get_var('var1')\u000a \u0009ctrl.get_var('var2')\u000a \u0009ctrl.get_var('var3')\u000a\u000aand\u000a\u000a # get_var() opens a connection, does the GET and closes again\u000a OsmoCtrl(...).get_var('var1')\u000a\u000aDo away with doubling the instances OsmoCtrl and e.g. OsmoBscCtrl.\u000aRather make OsmoBscCtrl a child class of OsmoCtrl, which means that we\u000ano longer have bsc.ctrl().ctrl(), just bsc.ctrl().\u000a\u000aHave VERB_* constants instead of dup'd strings.\u000a\u000aApply to / simplify all callers of OsmoCtrl.\u000a\u000aSome of these changes are similar to recently added OsmoVty.\u000a\u000aChange-Id: Id561e5a55d8057a997a8ec9e7fa6f94840194df1\u000a", "date" : "2020-12-11 00:30:38 +0100", "id" : "5b04ef213e8934e4bdf972bd1809ee86742f613d", "msg" : "OsmoCtrl cleanup: get_var(), set_var(), get_trap()", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/osmo_ctrl.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/bsc_osmo.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/msc_osmo.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/nitb_osmo.py" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/testenv.py", "src/osmo_gsm_tester/obj/msc_osmo.py", "src/osmo_gsm_tester/obj/nitb_osmo.py", "src/osmo_gsm_tester/obj/bsc_osmo.py" ], "commitId" : "012a17da6a0c0628f890786d1b6c4a5ecb18cccd", "timestamp" : 1607643038000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/neels", "fullName" : "Neels Hofmeyr" }, "authorEmail" : "neels@hofmeyr.de", "comment" : "keep Ctrl connections open for bsc, msc and nitb objects\u000a\u000aThe pattern to use 'with' to keep a CTRL connection open adds indents to\u000aevery test script that wants to avoid multiple reconnections to the\u000aCTRL. Instead, keeping a single open connection that is cleaned up on\u000a{bsc,msc,nitb} object cleanup ensures that a) the program started up\u000asuccessfully and opened a CTRL port, b) always has a CTRL open without\u000ahaving to worry about it and c) keeps test scripts less\u000acomplex/indented/crufted.\u000a\u000a(These are all current users of the OsmoCtrl API.)\u000a\u000aChange-Id: I53fedbe569c5ccbc4b1a17dafe1f8d1bb8200b24\u000a", "date" : "2020-12-11 00:30:38 +0100", "id" : "012a17da6a0c0628f890786d1b6c4a5ecb18cccd", "msg" : "keep Ctrl connections open for bsc, msc and nitb objects", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/msc_osmo.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/testenv.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/nitb_osmo.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/bsc_osmo.py" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "selftest/rate_ctrs_test/_prep.py", "selftest/rate_ctrs_test/rate_ctrs_test.py", "selftest/rate_ctrs_test/rate_ctrs_test.err", "src/osmo_gsm_tester/obj/osmo_ctrl.py", "selftest/rate_ctrs_test/rate_ctrs_test.ok" ], "commitId" : "5354058c75200728caf4dcdcb2c87754b103d2ca", "timestamp" : 1607643038000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/neels", "fullName" : "Neels Hofmeyr" }, "authorEmail" : "neels@hofmeyr.de", "comment" : "osmo_ctrl.py: add RateCounters\u000a\u000aFirst user will be the upcoming handover_2G/handover.py test in\u000aI0b2671304165a1aaae2b386af46fbd8b098e3bd8.\u000a\u000aChange-Id: Id799b3bb81eb9c04d13c26ff611e40363920300e\u000a", "date" : "2020-12-11 00:30:38 +0100", "id" : "5354058c75200728caf4dcdcb2c87754b103d2ca", "msg" : "osmo_ctrl.py: add RateCounters", "paths" : [ { "editType" : "add", "file" : "selftest/rate_ctrs_test/_prep.py" }, { "editType" : "add", "file" : "selftest/rate_ctrs_test/rate_ctrs_test.ok" }, { "editType" : "add", "file" : "selftest/rate_ctrs_test/rate_ctrs_test.err" }, { "editType" : "add", "file" : "selftest/rate_ctrs_test/rate_ctrs_test.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/osmo_ctrl.py" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/testenv.py", "sysmocom/scenarios/bts1-trx-sysmocell5000.conf", "sysmocom/scenarios/bts1-trx-umtrx.conf", "sysmocom/suites/handover_2G/suite.conf", "sysmocom/scenarios/bts1-trx-lms.conf", "sysmocom/scenarios/bts1-sysmo.conf", "sysmocom/scenarios/bts1-trx-b200.conf", "sysmocom/scenarios/bts1-trx-lms-limenet-micro.conf", "sysmocom/scenarios/bts1-octphy.conf", "sysmocom/scenarios/bts1-oc2g.conf", "sysmocom/scenarios/bts1-nanobts.conf", "sysmocom/handover-suites.conf", "sysmocom/suites/handover_2G/handover.py" ], "commitId" : "de6743de9a72a0798896d09f50572b9a9fdc20d2", "timestamp" : 1607643677000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/neels", "fullName" : "Neels Hofmeyr" }, "authorEmail" : "neels@hofmeyr.de", "comment" : "add handover_2G suite, with handover.py test\u000a\u000aVia VTY, handover two lchans of a voice call from bts0 to bts1 and back.\u000a\u000aNew scenarios/bts1-* allow selecting various types for bts1,\u000acomplementing the already existing files for selecting bts0.\u000a\u000aChange-Id: I0b2671304165a1aaae2b386af46fbd8b098e3bd8\u000a", "date" : "2020-12-11 00:41:17 +0100", "id" : "de6743de9a72a0798896d09f50572b9a9fdc20d2", "msg" : "add handover_2G suite, with handover.py test", "paths" : [ { "editType" : "add", "file" : "sysmocom/scenarios/bts1-trx-lms.conf" }, { "editType" : "add", "file" : "sysmocom/handover-suites.conf" }, { "editType" : "add", "file" : "sysmocom/suites/handover_2G/suite.conf" }, { "editType" : "add", "file" : "sysmocom/scenarios/bts1-oc2g.conf" }, { "editType" : "add", "file" : "sysmocom/scenarios/bts1-nanobts.conf" }, { "editType" : "add", "file" : "sysmocom/scenarios/bts1-trx-b200.conf" }, { "editType" : "add", "file" : "sysmocom/scenarios/bts1-trx-sysmocell5000.conf" }, { "editType" : "add", "file" : "sysmocom/scenarios/bts1-trx-lms-limenet-micro.conf" }, { "editType" : "add", "file" : "sysmocom/scenarios/bts1-sysmo.conf" }, { "editType" : "add", "file" : "sysmocom/scenarios/bts1-trx-umtrx.conf" }, { "editType" : "add", "file" : "sysmocom/suites/handover_2G/handover.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/testenv.py" }, { "editType" : "add", "file" : "sysmocom/scenarios/bts1-octphy.conf" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "sysmocom/default-suites.conf" ], "commitId" : "7187510defa64c18a9ae8604abf51cfcd7e27d4b", "timestamp" : 1607643677000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/neels", "fullName" : "Neels Hofmeyr" }, "authorEmail" : "neels@hofmeyr.de", "comment" : "run handover_2G in default-suites.conf\u000a\u000aChange-Id: Ic6bb013cc2c395211eeb86fe7a3d3f42671793c7\u000a", "date" : "2020-12-11 00:41:17 +0100", "id" : "7187510defa64c18a9ae8604abf51cfcd7e27d4b", "msg" : "run handover_2G in default-suites.conf", "paths" : [ { "editType" : "edit", "file" : "sysmocom/default-suites.conf" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/core/process.py" ], "commitId" : "fb8c02fbd5419f37b5261f3166d8b3b2970e599f", "timestamp" : 1607643677000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/neels", "fullName" : "Neels Hofmeyr" }, "authorEmail" : "neels@hofmeyr.de", "comment" : "process output: do not leak ANSI colors past logged stdout/stderr\u000a\u000aIn jenkins, I still saw incidents of the entire log becoming colored\u000aafter a colored stderr snippet was printed to the log. Make absolutely\u000asure that no unterminated ANSI coloring is leaked.\u000a\u000aChange-Id: Ib9ac1eea4a12d6d43ac8614491f016bbe9ca17b1\u000a", "date" : "2020-12-11 00:41:17 +0100", "id" : "fb8c02fbd5419f37b5261f3166d8b3b2970e599f", "msg" : "process output: do not leak ANSI colors past logged stdout/stderr", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/core/process.py" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo-gsm-tester.py" ], "commitId" : "1e01a68846abd272118a0c539439c3fb4ae39a3d", "timestamp" : 1607643677000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/neels", "fullName" : "Neels Hofmeyr" }, "authorEmail" : "neels@hofmeyr.de", "comment" : "add option osmo-gsm-tester.py --suites-file my-suites-listing.conf\u000a\u000aFor example, run with '-S handover-suites.conf' to just do the handover\u000atests.\u000a\u000aChange-Id: If896ac84d02a275deda2f20a93c29312df128ebb\u000a", "date" : "2020-12-11 00:41:17 +0100", "id" : "1e01a68846abd272118a0c539439c3fb4ae39a3d", "msg" : "add option osmo-gsm-tester.py --suites-file my-suites-listing.conf", "paths" : [ { "editType" : "edit", "file" : "src/osmo-gsm-tester.py" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/obj/osmo_ctrl.py" ], "commitId" : "f80f7cc5c46bddf63c0f41042f28e7f62aec45af", "timestamp" : 1607643677000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/neels", "fullName" : "Neels Hofmeyr" }, "authorEmail" : "neels@hofmeyr.de", "comment" : "OsmoCtrl: use one global common counter for CTRL IDs\u000a\u000aIt is easier to traverse debugging logs if the CTRL request and response\u000aIDs are globally unique across all programs and tests. Before this, we\u000awere using 0 almost everywhere.\u000a\u000a(This is not strictly needed for correctness, since each CTRL client has\u000aits own request ID scope; just we open fairly many separate CTRL clients\u000aall the time in our tests.)\u000a\u000aChange-Id: I44c51f4fb5beb6cedf98ea0d6684a24c6aa418c7\u000a", "date" : "2020-12-11 00:41:17 +0100", "id" : "f80f7cc5c46bddf63c0f41042f28e7f62aec45af", "msg" : "OsmoCtrl: use one global common counter for CTRL IDs", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/osmo_ctrl.py" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "sysmocom/resources.conf.prod" ], "commitId" : "7ecfaa6a0f970ff22520feeda97ca5920e7a0614", "timestamp" : 1607689708000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/pespin", "fullName" : "Pau Espin Pedrol" }, "authorEmail" : "pespin@espeweb.net", "comment" : "sysmocom resources.conf.prod: Update modem paths + add new modems after HW upgrade\u000a\u000aChange-Id: I346a5bb38270a32695ec73994179bd75d873b67a\u000a", "date" : "2020-12-11 13:28:28 +0100", "id" : "7ecfaa6a0f970ff22520feeda97ca5920e7a0614", "msg" : "sysmocom resources.conf.prod: Update modem paths + add new modems after HW upgrade", "paths" : [ { "editType" : "edit", "file" : "sysmocom/resources.conf.prod" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/core/resource.py" ], "commitId" : "2c92c2e9be4ad301b03649071aa6f7b4bc057bbe", "timestamp" : 1608216699000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/pespin", "fullName" : "Pau Espin Pedrol" }, "authorEmail" : "pespin@espeweb.net", "comment" : "resource: Fix next_zmq_port_range using bvci file name\u000a\u000aChange-Id: I293b7de1066ea69ccb0e495a69602ed56810018d\u000a", "date" : "2020-12-17 15:51:39 +0100", "id" : "2c92c2e9be4ad301b03649071aa6f7b4bc057bbe", "msg" : "resource: Fix next_zmq_port_range using bvci file name", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/core/resource.py" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "sysmocom/resources.conf.virtual" ], "commitId" : "929a4f963c2c7927b72bd41eb737cc92c53547de", "timestamp" : 1608571532000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/pespin", "fullName" : "Pau Espin Pedrol" }, "authorEmail" : "pespin@espeweb.net", "comment" : "sysmocom/resources.conf.virtual: remove no longer existing arfcn resources\u000a\u000aARFCN are not resources anymore since a recent commit.\u000a\u000aFixes: ecce402f43b708bf178d603e2bd8587e72fdb3b1\u000aChange-Id: Icc0971b285e8db085670808b7d7bb98c38db2753\u000a", "date" : "2020-12-21 18:25:32 +0100", "id" : "929a4f963c2c7927b72bd41eb737cc92c53547de", "msg" : "sysmocom/resources.conf.virtual: remove no longer existing arfcn resources", "paths" : [ { "editType" : "edit", "file" : "sysmocom/resources.conf.virtual" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "sysmocom/suites/netreg_mass/suite.conf", "sysmocom/suites/nitb_netreg_mass/register_default_mass.py", "sysmocom/suites/netreg_mass/register_default_mass.py", "sysmocom/suites/nitb_netreg_mass/suite.conf" ], "commitId" : "d95d494fcc1979299c19cd337fdfb21ae77739e6", "timestamp" : 1608571963000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/pespin", "fullName" : "Pau Espin Pedrol" }, "authorEmail" : "pespin@espeweb.net", "comment" : "sysmocom: Port nitb_netreg_mass suite to osmo split network\u000a\u000aChange-Id: I221df84d76f73e15eed98036b31adc8089c8dc99\u000a", "date" : "2020-12-21 18:32:43 +0100", "id" : "d95d494fcc1979299c19cd337fdfb21ae77739e6", "msg" : "sysmocom: Port nitb_netreg_mass suite to osmo split network", "paths" : [ { "editType" : "add", "file" : "sysmocom/suites/netreg_mass/register_default_mass.py" }, { "editType" : "add", "file" : "sysmocom/suites/netreg_mass/suite.conf" }, { "editType" : "delete", "file" : "sysmocom/suites/nitb_netreg_mass/register_default_mass.py" }, { "editType" : "delete", "file" : "sysmocom/suites/nitb_netreg_mass/suite.conf" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "contrib/jenkins-build-srslte.sh" ], "commitId" : "4cd6f14be2908230ad52d138d8a9697103c47eca", "timestamp" : 1610033425000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/andre", "fullName" : "andre" }, "authorEmail" : "andre@softwareradiosystems.com", "comment" : "jenkins-build-srslte.sh: allow custom binaries\u000a\u000athis allows to specify the environmental var\u000awanted_binaries_bin that will be included in the\u000atrial package. if the variable isn't set, all three\u000amain srsLTE binaries are included\u000a\u000aChange-Id: I63f5799328435ce32b5bfd6dae6fd0b37e1e5397\u000a", "date" : "2021-01-07 16:30:25 +0100", "id" : "4cd6f14be2908230ad52d138d8a9697103c47eca", "msg" : "jenkins-build-srslte.sh: allow custom binaries", "paths" : [ { "editType" : "edit", "file" : "contrib/jenkins-build-srslte.sh" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/templates/srsenb_drb.conf.tmpl" ], "commitId" : "a7725fcedf5f22895897e08e7a9d62bedbb7fff4", "timestamp" : 1610033425000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/andre", "fullName" : "andre" }, "authorEmail" : "andre@softwareradiosystems.com", "comment" : "srsenb_drb.conf.tmpl: add QCI1 DRB config\u000a\u000ause default QCI1 config for real-time voice traffic\u000a\u000aChange-Id: I43f408b1a3c172a5eb8327f03df49801e063e5cd\u000a", "date" : "2021-01-07 16:30:25 +0100", "id" : "a7725fcedf5f22895897e08e7a9d62bedbb7fff4", "msg" : "srsenb_drb.conf.tmpl: add QCI1 DRB config", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/templates/srsenb_drb.conf.tmpl" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/obj/enb.py" ], "commitId" : "bfd3fe659e4e8bac99e7530e71126ca5be57d121", "timestamp" : 1610033425000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/andre", "fullName" : "andre" }, "authorEmail" : "andre@softwareradiosystems.com", "comment" : "enb: include name label and run_addr in enb remote path\u000a\u000athis allows to quickly identify the enb host in the logs\u000a\u000aChange-Id: I9c979de852a23041e43692e97ebcbfb389b52fdb\u000a", "date" : "2021-01-07 16:30:25 +0100", "id" : "bfd3fe659e4e8bac99e7530e71126ca5be57d121", "msg" : "enb: include name label and run_addr in enb remote path", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/enb.py" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/templates/srsue.conf.tmpl" ], "commitId" : "507c60ca0c2b3a6be9c506e22de5670db9f009fa", "timestamp" : 1610033425000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/andre", "fullName" : "andre" }, "authorEmail" : "andre@softwareradiosystems.com", "comment" : "srsue.conf.tmpl: reorder conditions for setting RRC release\u000a\u000athe order of checks needs to go from high to low, i.e. the higher\u000arelease feature (e.g. qam256) needs to be checked and set first.\u000a\u000ain theory it should also be possible to have a CA-capable UE\u000athat does not support QAM256, but for srsUE we announce both anyway.\u000a\u000aChange-Id: I2fa49f0cb5d80db412a811ceeb380359c8ad67a7\u000a", "date" : "2021-01-07 16:30:25 +0100", "id" : "507c60ca0c2b3a6be9c506e22de5670db9f009fa", "msg" : "srsue.conf.tmpl: reorder conditions for setting RRC release", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/templates/srsue.conf.tmpl" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "sysmocom/scenarios/mod-enb-cells-intraenb-intrafreq-ho.conf" ], "commitId" : "eee4f5f715199cae9ba2def407aed4ba7177d6fc", "timestamp" : 1610033425000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/andre", "fullName" : "andre" }, "authorEmail" : "andre@softwareradiosystems.com", "comment" : "intraenb-intrafreq-ho.conf: add eNB to cell config\u000a\u000amake sure to have the right eNB that matches the\u000acells neighbor ECIDs, otherwise the eNB may trigger\u000aa S1 HO if the eNB ID is set elsewhere\u000a\u000aChange-Id: Id494ac1984846e78a6456bb6a17e72d63c9dacf5\u000a", "date" : "2021-01-07 16:30:25 +0100", "id" : "eee4f5f715199cae9ba2def407aed4ba7177d6fc", "msg" : "intraenb-intrafreq-ho.conf: add eNB to cell config", "paths" : [ { "editType" : "edit", "file" : "sysmocom/scenarios/mod-enb-cells-intraenb-intrafreq-ho.conf" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/templates/srsue.conf.tmpl" ], "commitId" : "1d1c0bfed93811280da2fae90e9c078a682d7042", "timestamp" : 1610033425000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/andre", "fullName" : "andre" }, "authorEmail" : "andre@softwareradiosystems.com", "comment" : "srsue.conf.tmpl: disable TTI stats for ZMQ\u000a\u000asince ZMQ runs are not using wall clock anyway, measuring\u000aTTI execution isn't useful, disable it therefore to avoid\u000amisleading warnings.\u000a\u000aChange-Id: I5c2cb0abcfce0ee67806f6611356f4d5d180541d\u000a", "date" : "2021-01-07 16:30:25 +0100", "id" : "1d1c0bfed93811280da2fae90e9c078a682d7042", "msg" : "srsue.conf.tmpl: disable TTI stats for ZMQ", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/templates/srsue.conf.tmpl" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/obj/enb_srs.py" ], "commitId" : "b7ce9499b61e6d8b4556e70aefb768a95ec1ad2e", "timestamp" : 1610048627000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/andre", "fullName" : "andre" }, "authorEmail" : "andre@softwareradiosystems.com", "comment" : "enb_srs: only use QAM64 tables if both UE and eNB are configured for QAM64\u000a\u000athis was causing failed tests because to achieve QAM64 rates both\u000aeNB and UE need to support it and have it activated.\u000a\u000aChange-Id: I599df92d69eeb56a5d44327de08f004222cff073\u000a", "date" : "2021-01-07 20:43:47 +0100", "id" : "b7ce9499b61e6d8b4556e70aefb768a95ec1ad2e", "msg" : "enb_srs: only use QAM64 tables if both UE and eNB are configured for QAM64", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/enb_srs.py" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/obj/enb_srs.py" ], "commitId" : "2df63d0f2fb2065633c4d7e1038a61803989d6ed", "timestamp" : 1610048627000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/andre", "fullName" : "andre" }, "authorEmail" : "andre@softwareradiosystems.com", "comment" : "enb_srs: adopt throughput thresholds for QAM256\u000a\u000ait turned out that we have to reduce the MCS when using QAM256,\u000aespecially for 6 PRB as subframe 0 and 5 contains PBCH and PSS\u000asignals, so the available REs are reduced.\u000a\u000aThe eNB scheduler now has this limitation in mind and lowers the MCS.\u000a\u000aChange-Id: I0e38fe28002fd68c768cc8dcffcf74f4f190df02\u000a", "date" : "2021-01-07 20:43:47 +0100", "id" : "2df63d0f2fb2065633c4d7e1038a61803989d6ed", "msg" : "enb_srs: adopt throughput thresholds for QAM256", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/enb_srs.py" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/templates/srsepc.conf.tmpl" ], "commitId" : "9c7fd618d226dc532b9408c329cfc2380de4850a", "timestamp" : 1610048627000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/andre", "fullName" : "andre" }, "authorEmail" : "andre@softwareradiosystems.com", "comment" : "srsepc.conf.tmpl: increase default value of T3413 (paging timer)\u000a\u000awe've seen that the default value of 2s might be a bit tight.\u000athe value is network dependent so no real default value exists.\u000ahowever, 6s seems to be a good compromise.\u000a\u000aChange-Id: Icc75ee048c2cc605ab26c4c87a039519998f7e57\u000a", "date" : "2021-01-07 20:43:47 +0100", "id" : "9c7fd618d226dc532b9408c329cfc2380de4850a", "msg" : "srsepc.conf.tmpl: increase default value of T3413 (paging timer)", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/templates/srsepc.conf.tmpl" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/templates/srsenb.conf.tmpl" ], "commitId" : "4cb9ab56715ac69c659eccada59bf9c6356416e1", "timestamp" : 1610048628000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/andre", "fullName" : "andre" }, "authorEmail" : "andre@softwareradiosystems.com", "comment" : "srsenb.conf.tmpl: set nof_of_prach_threds to 0 for ZMQ\u000a\u000athis executed the PRACH search in the main thread so\u000aPHY workers and PRACH processing don't diverge in loaded\u000ascenarios\u000a\u000aChange-Id: I97eddb5f9ca682251ded1f73093c2d0a49462bd6\u000a", "date" : "2021-01-07 20:43:48 +0100", "id" : "4cb9ab56715ac69c659eccada59bf9c6356416e1", "msg" : "srsenb.conf.tmpl: set nof_of_prach_threds to 0 for ZMQ", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/templates/srsenb.conf.tmpl" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "utils/bin/osmo-gsm-tester_androidue_conn_chk.sh", "src/osmo_gsm_tester/obj/android_host.py", "src/osmo_gsm_tester/obj/run_node.py", "sysmocom/scenarios/ms-label.conf", "src/osmo_gsm_tester/core/schema.py", "utils/bin/osmo-gsm-tester_androidue_diag_parser.sh", "src/osmo_gsm_tester/obj/ms.py", "src/osmo_gsm_tester/obj/ms_android.py", "src/osmo_gsm_tester/obj/android_apn.py", "src/osmo_gsm_tester/obj/qc_diag.py", "src/osmo_gsm_tester/obj/android_bitrate_monitor.py", "src/osmo_gsm_tester/obj/iperf3.py", "src/osmo_gsm_tester/core/process.py" ], "commitId" : "a8263f40e9c3baf4a6ba34b213ff2fe87c0993fd", "timestamp" : 1610563556000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/nils.fuerste", "fullName" : "nils.fuerste" }, "authorEmail" : "nils.fuerste@rub.de", "comment" : "Introduce Android UEs as new modems\u000a\u000aTo expand the test capacities we would like to introduce\u000aAndroid UEs as new modems. Currently the following tests\u000aare supported:\u000a- Ping\u000a- iPerf3 DL/UL\u000a- RRC Mobile MT Ping\u000a\u000aIn the following is a small description.\u000a\u000aPrerequisites:\u000a - Android UE\u000a - Rooted (Ping, iPerf, RRC Idle MT Ping)\u000a - Qualcomm baseband with working diag_mdlog (RRC Idle MT Ping)\u000a - iPerf3\u000a - Dropbear\u000a - OGT Slave Unit\u000a - Android SDK Platform-Tools\u000a\u0009 (https://developer.android.com/studio/releases/platform-tools#downloads)\u000a - Pycrate (https://github.com/P1sec/pycrate)\u000a - SCAT\u000a clone https://github.com/bedrankara/scat/ & install dependencies\u000a checkout branch ogt\u000a symlink scat (ln -s ~/scat/scat.py /usr/local/bin/scat)\u000a\u000aInfrastructure explaination:\u000aThe Android UEs are connected to the OGT Units via USB. We\u000aactivate tethering and set up a SSH server (with Dropbear).\u000aWe chose tethering over WiFi to have a more stable route\u000afor the ssh connection. We forward incoming connections to\u000athe OGT unit hosting the Android UE(s) on specific ports\u000ato the UEs via iptables. This enables OGT to issue commands\u000adirectly to the UEs. In case of local execution we use ADB\u000ato issue commands to the AndroidUE. The set up was tested\u000awith 5 Android UEs connected in parallel but it should be\u000ascalable to the number of available IPs in the respective\u000asubnet. Furthermore, we need to cross compile Dropbear\u000aand iPerf3 to use them on the UEs. These tools have to be\u000aadded to the $PATH variable of the UEs.\u000a\u000aExamplary set up:\u000aIn this example we have two separate OGT units (master\u000aand slave) and two Android UEs that are connected to the\u000aslave unit. An illustration may be found here: https://ibb.co/6BXSP2C\u000a\u000aOn UE 1:\u000aip address add 192.168.42.130/24 dev rndis0\u000aip route add 192.168.42.0/24 dev rndis0 table local_network\u000adropbearmulti dropbear -F -E -p 130 -R -T /data/local/tmp/authorized_keys -U 0 -G 0 -N root -A\u000a\u000aOn UE 2:\u000aip address add 192.168.42.131/24 dev rndis0\u000aip route add 192.168.42.0/24 dev rndis0 table local_network\u000adropbearmulti dropbear -F -E -p 131 -R -T /data/local/tmp/authorized_keys -U 0 -G 0 -N root -A\u000a\u000aOn OGT slave unit:\u000asudo ip link add name ogt type bridge\u000asudo ip l set eth0 master ogt\u000asudo ip l set enp0s20f0u1 master ogt\u000asudo ip l set enp0s20f0u2 master ogt\u000asudo ip a a 192.168.42.1/24 dev ogt\u000asudo ip link set ogt up\u000a\u000aNow we have to manually connect to every UE from OGT Master\u000ato set up SSH keys and verify that the setup works.\u000aTherefore, use:\u000assh -p [UE-PORT] root@[OGT SLAVE UNIT's IP]\u000a\u000aFinally, to finish the setup procedure create the\u000aremote_run_dir for Android UEs on the slave unit like\u000afollowing:\u000amkdir /osmo-gsm-tester-androidue\u000achown jenkins /osmo-gsm-tester-androidue\u000a\u000aExample for modem in resource.conf:\u000a- label: mi5g\u000a type: androidue\u000a imsi: '901700000034757'\u000a ki: '85E9E9A947B9ACBB966ED7113C7E1B8A'\u000a opc: '3E1C73A29B9C293DC5A763E42C061F15'\u000a apn:\u000a apn: 'srsapn'\u000a mcc: '901'\u000a mnc: '70'\u000a select: 'True'\u000a auth_algo: 'milenage'\u000a features: ['4g', 'dl_qam256', 'qc_diag']\u000a run_node:\u000a run_type: ssh\u000a run_addr: 100.113.1.170\u000a ssh_user: jenkins\u000a ssh_addr: 100.113.1.170\u000a ue_ssh_port: 130\u000a adb_serial_id: '8d3c79a7'\u000a scat_parser:\u000a run_type: local\u000a run_addr: 127.0.0.1\u000a adb_serial_id: '8d3c79a7'\u000a\u000aExample for default-suites.conf:\u000a- 4g:ms-label@mi5g+srsenb-rftype@uhd+mod-enb-nprb@25+mod-enb-txmode@1\u000a\u000aChange-Id: I79a5d803e869a868d4dac5e0d4c2feb38038dc5c\u000a", "date" : "2021-01-13 19:45:56 +0100", "id" : "a8263f40e9c3baf4a6ba34b213ff2fe87c0993fd", "msg" : "Introduce Android UEs as new modems", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/ms.py" }, { "editType" : "add", "file" : "src/osmo_gsm_tester/obj/android_apn.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/run_node.py" }, { "editType" : "add", "file" : "utils/bin/osmo-gsm-tester_androidue_diag_parser.sh" }, { "editType" : "add", "file" : "src/osmo_gsm_tester/obj/qc_diag.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/core/process.py" }, { "editType" : "add", "file" : "sysmocom/scenarios/ms-label.conf" }, { "editType" : "add", "file" : "src/osmo_gsm_tester/obj/ms_android.py" }, { "editType" : "add", "file" : "src/osmo_gsm_tester/obj/android_host.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/iperf3.py" }, { "editType" : "add", "file" : "src/osmo_gsm_tester/obj/android_bitrate_monitor.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/core/schema.py" }, { "editType" : "add", "file" : "utils/bin/osmo-gsm-tester_androidue_conn_chk.sh" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/obj/enb.py", "src/osmo_gsm_tester/obj/enb_srs.py", "src/osmo_gsm_tester/obj/srslte_common.py", "src/osmo_gsm_tester/obj/enb_amarisoft.py", "src/osmo_gsm_tester/obj/ms_srs.py", "src/osmo_gsm_tester/core/process.py" ], "commitId" : "f249a026a06812c667e037eb1b609d48922e13d7", "timestamp" : 1612802889000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/andre", "fullName" : "andre" }, "authorEmail" : "andre@softwareradiosystems.com", "comment" : "enb,ue,process: move stdout counter helper to process objects\u000a\u000athis patch adds the stdout counter to count events happening\u000aon the stdout (known from the UE already) to the common\u000aprocess class so they can also be used from the eNB (and other objects)\u000a\u000aIn addition, we add a PRACH counter to be used for tests.\u000a\u000aChange-Id: I434f072b8aa6f4dce9f90889c6b40832f6798ff8\u000a", "date" : "2021-02-08 17:48:09 +0100", "id" : "f249a026a06812c667e037eb1b609d48922e13d7", "msg" : "enb,ue,process: move stdout counter helper to process objects", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/ms_srs.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/enb.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/enb_srs.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/enb_amarisoft.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/core/process.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/srslte_common.py" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "sysmocom/suites/4g/rrc_idle_mo_ping.py", "sysmocom/suites/4g/rrc_idle_mt_ping.py" ], "commitId" : "29263b7389520ec2269d6852a09f96ef8da79573", "timestamp" : 1612802889000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/andre", "fullName" : "andre" }, "authorEmail" : "andre@softwareradiosystems.com", "comment" : "4g: add checks for received PRACHs for ping tests\u000a\u000athe tests already check for sent PRACHs, this will\u000aalso check for received PRACHs on the eNB to make\u000asure we don't detect any fake PRACHs during the tests.\u000a\u000aChange-Id: Ib23056b1ad4b18a7dde6cd0c997f5114ac2acb61\u000a", "date" : "2021-02-08 17:48:09 +0100", "id" : "29263b7389520ec2269d6852a09f96ef8da79573", "msg" : "4g: add checks for received PRACHs for ping tests", "paths" : [ { "editType" : "edit", "file" : "sysmocom/suites/4g/rrc_idle_mo_ping.py" }, { "editType" : "edit", "file" : "sysmocom/suites/4g/rrc_idle_mt_ping.py" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/obj/enb_srs.py", "src/osmo_gsm_tester/obj/enb.py", "src/osmo_gsm_tester/obj/srslte_common.py", "src/osmo_gsm_tester/obj/enb_amarisoft.py" ], "commitId" : "215bec2f3caca938e510f5d77e5b74dee343fbc2", "timestamp" : 1612802889000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/andre", "fullName" : "andre" }, "authorEmail" : "andre@softwareradiosystems.com", "comment" : "enb: add abstract method stop()\u000a\u000aimplement as noop for Amarisoft eNB, srsENB will send q+Enter to stdin,\u000awhich is implemented in class srslte_common()\u000a\u000aChange-Id: Ide606e1a6b523997215aa2fa39d4d56ae1f49181\u000a", "date" : "2021-02-08 17:48:09 +0100", "id" : "215bec2f3caca938e510f5d77e5b74dee343fbc2", "msg" : "enb: add abstract method stop()", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/enb_amarisoft.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/enb_srs.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/enb.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/srslte_common.py" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "sysmocom/scenarios/mod-enb-integrity@.conf", "src/osmo_gsm_tester/obj/bts.py", "src/osmo_gsm_tester/obj/enb_amarisoft.py", "sysmocom/defaults.conf", "src/osmo_gsm_tester/obj/enb.py", "src/osmo_gsm_tester/templates/srsenb.conf.tmpl", "src/osmo_gsm_tester/core/schema.py", "src/osmo_gsm_tester/templates/amarisoft_enb.cfg.tmpl", "sysmocom/scenarios/mod-enb-cipher@.conf", "src/osmo_gsm_tester/obj/ms.py" ], "commitId" : "a81801558e7bb6ef0f0a32ab078d302c91e940a8", "timestamp" : 1612802889000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/andre", "fullName" : "andre" }, "authorEmail" : "andre@softwareradiosystems.com", "comment" : "enb: Set cipher and integrity via scenario file\u000a\u000aThis patch enables setting cipher and integrity algorithms\u000ain Amarisoft eNB and srsENB via scenario files. If no\u000asettings are defined following defaults are applied:\u000a- Cipher algorithm: EEA0, EEA2, EEA1\u000a- Integrity algorithm: EIA2, EIA1, EIA0\u000a\u000aExample of setting cipher algorithms:\u000a- 4g:srsue-rftype@uhd+srsenb-rftype@uhd+mod-enb-cipher@eea1+mod-enb-cipher@eea0+mod-enb-nprb@6\u000a\u000aChange-Id: I595206b7d49016fb6d0aec175c828d9537c53886\u000a", "date" : "2021-02-08 17:48:09 +0100", "id" : "a81801558e7bb6ef0f0a32ab078d302c91e940a8", "msg" : "enb: Set cipher and integrity via scenario file", "paths" : [ { "editType" : "add", "file" : "sysmocom/scenarios/mod-enb-integrity@.conf" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/templates/srsenb.conf.tmpl" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/core/schema.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/bts.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/enb.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/templates/amarisoft_enb.cfg.tmpl" }, { "editType" : "edit", "file" : "sysmocom/defaults.conf" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/enb_amarisoft.py" }, { "editType" : "edit", "file" : "src/osmo_gsm_tester/obj/ms.py" }, { "editType" : "add", "file" : "sysmocom/scenarios/mod-enb-cipher@.conf" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "sysmocom/scenarios/mod-enb-cells-2ca.conf", "sysmocom/scenarios/mod-enb-ncells@.conf", "sysmocom/scenarios/mod-enb-cells-intra-freq-ho-sameport.conf", "sysmocom/scenarios/mod-enb-cells-intraenb-intrafreq-ho.conf" ], "commitId" : "b79a0c5e75dda5c08f8fa5dd9bcd6a8bcea106c7", "timestamp" : 1612802889000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/andre", "fullName" : "andre" }, "authorEmail" : "andre@softwareradiosystems.com", "comment" : "scenarios: remove ncells@ scenario and define number of cells explicitly\u000a\u000athe specific cell scenarios files already contain cell-related\u000ainformation so having a extra ncells scenario seems too much overhead.\u000afurthermore, in more complex tests its helps to reduce the filename/path\u000alenght to avoid hitting the 255 character limit\u000a\u000aChange-Id: If022d9e8d239805ee1280fb52660e68dda7484a0\u000a", "date" : "2021-02-08 17:48:09 +0100", "id" : "b79a0c5e75dda5c08f8fa5dd9bcd6a8bcea106c7", "msg" : "scenarios: remove ncells@ scenario and define number of cells explicitly", "paths" : [ { "editType" : "edit", "file" : "sysmocom/scenarios/mod-enb-cells-2ca.conf" }, { "editType" : "edit", "file" : "sysmocom/scenarios/mod-enb-cells-intraenb-intrafreq-ho.conf" }, { "editType" : "edit", "file" : "sysmocom/scenarios/mod-enb-cells-intra-freq-ho-sameport.conf" }, { "editType" : "delete", "file" : "sysmocom/scenarios/mod-enb-ncells@.conf" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/templates/srsepc.conf.tmpl", "sysmocom/suites/4g/rrc_idle_mt_ping.py" ], "commitId" : "d1732d78205c164e0ed9f2db8b3510537879796d", "timestamp" : 1612802889000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/andre", "fullName" : "andre" }, "authorEmail" : "andre@softwareradiosystems.com", "comment" : "srsepc.conf.tmpl: double value of T3413 (paging timer)\u000a\u000awe've already incrased the t3413 value in 9c7fd618d226dc532b9408c329cfc2380de4850a\u000abut realized it may still be too low in some cases.\u000a\u000awe set it to 12s now.\u000a\u000aChange-Id: I9c3c59c0ff8f539a44b420f8ba31eea016c211ce\u000a", "date" : "2021-02-08 17:48:09 +0100", "id" : "d1732d78205c164e0ed9f2db8b3510537879796d", "msg" : "srsepc.conf.tmpl: double value of T3413 (paging timer)", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/templates/srsepc.conf.tmpl" }, { "editType" : "edit", "file" : "sysmocom/suites/4g/rrc_idle_mt_ping.py" } ] }, { "_class" : "hudson.plugins.git.GitChangeSet", "affectedPaths" : [ "src/osmo_gsm_tester/templates/srsue.conf.tmpl" ], "commitId" : "7aa14e45f455f87c1dfe9966d759093af9f6d6fc", "timestamp" : 1612802889000, "author" : { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/andre", "fullName" : "andre" }, "authorEmail" : "andre@softwareradiosystems.com", "comment" : "srsue.conf.tmpl: reduce nof PHY threads to 2 for ZMQ\u000a\u000awe've detected a possible race condition during the Msg3\u000atransmission that caused the thread that sets the Msg3 grant\u000ato be delayed. The PHY worker that executed TTI+2 finished\u000aby that time already and didn't even see the pending UL grant.\u000a\u000aThis is issue is more likely to happen on loaded system,\u000afor example when running parallel ZMQ jobs. We therefore decided\u000ato reduce the number of parallel PHY workers to 2 so the issue\u000ais circumvented.\u000a\u000aChange-Id: Ibdb42a1705d87b6d343201458c8fe397398802bc\u000a", "date" : "2021-02-08 17:48:09 +0100", "id" : "7aa14e45f455f87c1dfe9966d759093af9f6d6fc", "msg" : "srsue.conf.tmpl: reduce nof PHY threads to 2 for ZMQ", "paths" : [ { "editType" : "edit", "file" : "src/osmo_gsm_tester/templates/srsue.conf.tmpl" } ] } ], "kind" : "git" }, "culprits" : [ { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/holger", "fullName" : "holger" }, { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/zecke", "fullName" : "Holger Freyther" }, { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/pmaier", "fullName" : "pmaier@sysmocom.de" }, { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/neels", "fullName" : "Neels Hofmeyr" }, { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/osmith", "fullName" : "Oliver Smith" }, { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/nils.fuerste", "fullName" : "nils.fuerste" }, { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/fixeria", "fullName" : "Vadim Yanitskiy" }, { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/andre", "fullName" : "andre" }, { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/pespin", "fullName" : "Pau Espin Pedrol" }, { "absoluteUrl" : "https://jenkins.osmocom.org/jenkins/user/laforge", "fullName" : "laforge" } ] }