Failed
gprs:nanobts+band-1900.ping_idle_ping.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=4757): Process ended prematurely: osmo-stp_10.42.42.5(pid=4757) [trial-2359↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4757)]
Standard Output
---------------------------------------------- trial-2359 gprs:nanobts+band-1900 ping_idle_ping.py ---------------------------------------------- 12:22:39.613638 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:22:39.626612 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 12:22:39.768205 tst ping_idle_ping.py: using LAC 21433 12:22:39.888795 tst ping_idle_ping.py: using RAC 13 12:22:40.007166 tst ping_idle_ping.py: using CellId 21433 12:22:40.125653 tst ping_idle_ping.py: using BVCI 21434 12:22:40.149135 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:22:40.160052 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:22:40.171062 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:22:40.182206 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:22:40.193044 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:22:40.203554 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:22:40.214670 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:22:40.225497 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 12:22:40.520723 tst ping_idle_ping.py:24: start network... 12:22:40.656539 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:22:41.172049 run create_hlr_db(pid=4751): Launched 12:22:41.361901 bus /gobi_6: Setting Powered False 12:22:42.382106 run create_hlr_db(pid=4751): Terminated: ok {rc=0} 12:22:42.818967 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4753): Launched 12:22:43.145862 run osmo-hlr_10.42.42.2(pid=4754): Launched 12:22:43.265412 run osmo-stp_10.42.42.5: Starting osmo-stp 12:22:43.834906 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4756): Launched 12:22:44.162541 run osmo-stp_10.42.42.5(pid=4757): Launched 12:22:44.280051 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:22:44.851151 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4759): Launched 12:22:44.967091 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:22:45.253721 run patchelf(pid=4760): Launched 12:22:45.445845 run osmo-stp_10.42.42.5(pid=4757): ERR: Terminated: ERROR {rc=1} [trial-2359↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4757)] 12:22:45.585144 run osmo-stp_10.42.42.5(pid=4757): stdout: | (launched: 2022-12-09_12:22:43.999997) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:22:45.724434 run osmo-stp_10.42.42.5(pid=4757): stderr: | �[0;m�[38;5;43m20221209122244189 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209122244189 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209122244189 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209122244190 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209122244190 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209122244190 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209122244190 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:22:45.861860 run osmo-stp_10.42.42.5(pid=4757): stdout: | (launched: 2022-12-09_12:22:43.999997) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:22:45.998830 run osmo-stp_10.42.42.5(pid=4757): stderr: | �[0;m�[38;5;43m20221209122244189 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209122244189 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209122244189 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209122244190 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209122244190 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209122244190 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209122244190 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:22:46.158154 run patchelf(pid=4760): Terminating (SIGINT) 12:22:46.346840 run patchelf(pid=4760): Terminated: ok {rc=0} 12:22:46.381743 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=4757): Process ended prematurely: osmo-stp_10.42.42.5(pid=4757) [trial-2359↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4757)] [trial-2359↪gprs:nanobts+band-1900↪ping_idle_ping.py:27] 12:22:46.392145 tst ping_idle_ping.py:27: Test FAILED (6.8 sec) 12:22:46.458987 run osmo-hlr_10.42.42.2(pid=4754): ERR: Terminated: ERROR {rc=237} [trial-2359↪gprs:nanobts+band-1900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4754)] 12:22:46.513156 run osmo-hlr_10.42.42.2(pid=4754): stdout: | (launched: 2022-12-09_12:22:42.983764) 12:22:46.568028 run osmo-hlr_10.42.42.2(pid=4754): stderr: | �[0;m�[1;31m20221209122243178 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209122243178 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209122243178 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209122243178 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209122243178 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209122243178 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209122243191 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2359/run.2022-12-09_11-17-44/gprs:nanobts+band-1900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209122243199 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209122243199 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209122243199 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:22:46.615213 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4753): Terminating (SIGTERM) 12:22:46.661276 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4756): Terminating (SIGTERM) 12:22:46.706074 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4759): Terminating (SIGTERM) 12:22:46.716460 --- ParallelTerminationStrategy: PID 4753 died... 12:22:46.776026 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4753): Terminated: ok {rc=0} 12:22:46.787224 --- ParallelTerminationStrategy: PID 4756 died... 12:22:46.846186 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4756): Terminated: ok {rc=0} 12:22:46.857432 --- ParallelTerminationStrategy: PID 4759 died... 12:22:46.916770 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4759): Terminated: ok {rc=0} 12:22:47.005424 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4757): Process ended prematurely: osmo-stp_10.42.42.5(pid=4757) [trial-2359↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4757)]