Failed
gprs:trx-b200+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=1453): Process ended prematurely: osmo-stp_10.42.42.5(pid=1453) [trial-2359↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1453)]
Standard Output
---------------------------------------------- trial-2359 gprs:trx-b200+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 11:43:22.991204 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:43:23.002723 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 11:43:23.172221 tst cs_paging_gprs_active.py: using LAC 21226 11:43:23.301990 tst cs_paging_gprs_active.py: using RAC 61 11:43:23.431858 tst cs_paging_gprs_active.py: using CellId 21226 11:43:23.556078 tst cs_paging_gprs_active.py: using BVCI 21227 11:43:23.579823 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:43:23.590960 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:43:23.601749 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:43:23.612640 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:43:23.623336 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:43:23.634133 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:43:23.645029 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:43:23.655606 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:43:23.666582 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 11:43:23.789457 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 11:43:24.092513 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:43:24.232595 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:43:24.577373 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1443): Launched 11:43:24.865298 run iperf3-srv_10.42.42.10(pid=1444): Launched 11:43:25.069507 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:43:25.209400 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:43:25.554866 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1445): Launched 11:43:25.843305 run iperf3-srv_10.42.42.10(pid=1446): Launched 11:43:26.047256 tst cs_paging_gprs_active.py:38: start network... 11:43:26.186661 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:43:26.710872 run create_hlr_db(pid=1447): Launched 11:43:26.902920 bus /gobi_6: Setting Powered False 11:43:27.923508 run create_hlr_db(pid=1447): Terminated: ok {rc=0} 11:43:28.340292 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1449): Launched 11:43:28.653251 run osmo-hlr_10.42.42.2(pid=1450): Launched 11:43:28.767140 run osmo-stp_10.42.42.5: Starting osmo-stp 11:43:29.304284 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1452): Launched 11:43:29.615387 run osmo-stp_10.42.42.5(pid=1453): Launched 11:43:29.727774 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:43:30.270100 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1455): Launched 11:43:30.380843 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:43:30.656018 run patchelf(pid=1456): Launched 11:43:30.840929 run osmo-stp_10.42.42.5(pid=1453): ERR: Terminated: ERROR {rc=1} [trial-2359↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1453)] 11:43:30.984685 run osmo-stp_10.42.42.5(pid=1453): stdout: | (launched: 2022-12-09_11:43:29.461575) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:43:31.125352 run osmo-stp_10.42.42.5(pid=1453): stderr: | �[0;m�[38;5;43m20221209114329631 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209114329631 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209114329631 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209114329632 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209114329632 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209114329632 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209114329632 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:43:31.260184 run osmo-stp_10.42.42.5(pid=1453): stdout: | (launched: 2022-12-09_11:43:29.461575) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:43:31.392487 run osmo-stp_10.42.42.5(pid=1453): stderr: | �[0;m�[38;5;43m20221209114329631 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209114329631 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209114329631 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209114329632 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209114329632 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209114329632 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209114329632 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:43:31.545134 run patchelf(pid=1456): Terminating (SIGINT) 11:43:31.726792 run patchelf(pid=1456): Terminated: ok {rc=0} 11:43:31.759979 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=1453): Process ended prematurely: osmo-stp_10.42.42.5(pid=1453) [trial-2359↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1453)] [trial-2359↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 11:43:31.770420 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 11:43:31.832108 run osmo-hlr_10.42.42.2(pid=1450): ERR: Terminated: ERROR {rc=237} [trial-2359↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1450)] 11:43:31.883325 run osmo-hlr_10.42.42.2(pid=1450): stdout: | (launched: 2022-12-09_11:43:28.498182) 11:43:31.935045 run osmo-hlr_10.42.42.2(pid=1450): stderr: | �[0;m�[1;31m20221209114328674 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209114328674 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209114328674 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209114328674 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209114328674 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209114328675 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209114328687 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2359/run.2022-12-09_11-17-44/gprs:trx-b200+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209114328695 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209114328695 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209114328695 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:43:31.978938 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1443): Terminating (SIGTERM) 11:43:32.022071 run iperf3-srv_10.42.42.10(pid=1444): Terminating (SIGTERM) 11:43:32.065090 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1445): Terminating (SIGTERM) 11:43:32.108669 run iperf3-srv_10.42.42.10(pid=1446): Terminating (SIGTERM) 11:43:32.153374 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1449): Terminating (SIGTERM) 11:43:32.193874 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1452): Terminating (SIGTERM) 11:43:32.234315 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1455): Terminating (SIGTERM) 11:43:32.243838 --- ParallelTerminationStrategy: PID 1443 died... 11:43:32.297399 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1443): Terminated: ok {rc=0} 11:43:32.306906 --- ParallelTerminationStrategy: PID 1444 died... 11:43:32.359944 run iperf3-srv_10.42.42.10(pid=1444): Terminated {rc=256} 11:43:32.369795 --- ParallelTerminationStrategy: PID 1445 died... 11:43:32.422965 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1445): Terminated: ok {rc=0} 11:43:32.432499 --- ParallelTerminationStrategy: PID 1446 died... 11:43:32.485716 run iperf3-srv_10.42.42.10(pid=1446): Terminated {rc=256} 11:43:32.495203 --- ParallelTerminationStrategy: PID 1449 died... 11:43:32.548195 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1449): Terminated: ok {rc=0} 11:43:32.558006 --- ParallelTerminationStrategy: PID 1452 died... 11:43:32.611269 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1452): Terminated: ok {rc=0} 11:43:32.620769 --- ParallelTerminationStrategy: PID 1455 died... 11:43:32.673835 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1455): Terminated: ok {rc=0} 11:43:32.763329 bus /gobi_0: Setting Powered False 11:43:33.867975 bus /gobi_0: Setting Powered False 11:43:34.980301 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1453): Process ended prematurely: osmo-stp_10.42.42.5(pid=1453) [trial-2359↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1453)]