Failed
gprs:trx-lms+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=3863): Process ended prematurely: osmo-stp_10.42.42.5(pid=3863) [trial-2359↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3863)]
Standard Output
---------------------------------------------- trial-2359 gprs:trx-lms+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 12:09:41.514582 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:09:41.525655 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 12:09:41.686550 tst cs_paging_gprs_active.py: using LAC 21364 12:09:41.804189 tst cs_paging_gprs_active.py: using RAC 199 12:09:41.923764 tst cs_paging_gprs_active.py: using CellId 21364 12:09:42.041106 tst cs_paging_gprs_active.py: using BVCI 21365 12:09:42.064230 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:09:42.075095 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:09:42.085743 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:09:42.096381 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:09:42.107083 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:09:42.117813 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:09:42.128533 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:09:42.139140 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:09:42.150004 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 12:09:42.271527 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 12:09:42.563451 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 12:09:42.688761 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:09:43.001611 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3853): Launched 12:09:43.262738 run iperf3-srv_10.42.42.10(pid=3854): Launched 12:09:43.446150 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 12:09:43.571348 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:09:43.884319 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3855): Launched 12:09:44.145607 run iperf3-srv_10.42.42.10(pid=3856): Launched 12:09:44.328023 tst cs_paging_gprs_active.py:38: start network... 12:09:44.452660 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:09:44.938977 run create_hlr_db(pid=3857): Launched 12:09:45.112634 bus /gobi_6: Setting Powered False 12:09:46.137864 run create_hlr_db(pid=3857): Terminated: ok {rc=0} 12:09:46.560206 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3859): Launched 12:09:46.979263 run osmo-hlr_10.42.42.2(pid=3860): Launched 12:09:47.177928 run osmo-stp_10.42.42.5: Starting osmo-stp 12:09:47.747120 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3862): Launched 12:09:48.076129 run osmo-stp_10.42.42.5(pid=3863): Launched 12:09:48.194411 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:09:48.763703 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3865): Launched 12:09:48.879775 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:09:49.166003 run patchelf(pid=3866): Launched 12:09:49.358192 run osmo-stp_10.42.42.5(pid=3863): ERR: Terminated: ERROR {rc=1} [trial-2359↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3863)] 12:09:49.496900 run osmo-stp_10.42.42.5(pid=3863): stdout: | (launched: 2022-12-09_12:09:47.913795) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:09:49.635427 run osmo-stp_10.42.42.5(pid=3863): stderr: | �[0;m�[38;5;43m20221209120948103 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209120948104 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209120948104 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209120948104 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209120948105 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209120948105 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209120948105 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:09:49.770698 run osmo-stp_10.42.42.5(pid=3863): stdout: | (launched: 2022-12-09_12:09:47.913795) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:09:49.904279 run osmo-stp_10.42.42.5(pid=3863): stderr: | �[0;m�[38;5;43m20221209120948103 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209120948104 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209120948104 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209120948104 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209120948105 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209120948105 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209120948105 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:09:50.061091 run patchelf(pid=3866): Terminating (SIGINT) 12:09:50.245056 run patchelf(pid=3866): Terminated: ok {rc=0} 12:09:50.278755 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=3863): Process ended prematurely: osmo-stp_10.42.42.5(pid=3863) [trial-2359↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3863)] [trial-2359↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 12:09:50.288809 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 12:09:50.352770 run osmo-hlr_10.42.42.2(pid=3860): ERR: Terminated: ERROR {rc=237} [trial-2359↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3860)] 12:09:50.404534 run osmo-hlr_10.42.42.2(pid=3860): stdout: | (launched: 2022-12-09_12:09:46.716464) 12:09:50.456700 run osmo-hlr_10.42.42.2(pid=3860): stderr: | �[0;m�[1;31m20221209120947044 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209120947045 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209120947045 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209120947045 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209120947045 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209120947045 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209120947062 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2359/run.2022-12-09_11-17-44/gprs:trx-lms+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209120947079 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209120947079 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209120947079 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:09:50.501318 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3853): Terminating (SIGTERM) 12:09:50.543341 run iperf3-srv_10.42.42.10(pid=3854): Terminating (SIGTERM) 12:09:50.585620 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3855): Terminating (SIGTERM) 12:09:50.627973 run iperf3-srv_10.42.42.10(pid=3856): Terminating (SIGTERM) 12:09:50.670507 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3859): Terminating (SIGTERM) 12:09:50.712376 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3862): Terminating (SIGTERM) 12:09:50.754048 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3865): Terminating (SIGTERM) 12:09:50.764004 --- ParallelTerminationStrategy: PID 3853 died... 12:09:50.820440 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3853): Terminated: ok {rc=0} 12:09:50.830613 --- ParallelTerminationStrategy: PID 3854 died... 12:09:50.886410 run iperf3-srv_10.42.42.10(pid=3854): Terminated {rc=256} 12:09:50.896736 --- ParallelTerminationStrategy: PID 3855 died... 12:09:50.953556 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3855): Terminated: ok {rc=0} 12:09:50.963556 --- ParallelTerminationStrategy: PID 3856 died... 12:09:51.019486 run iperf3-srv_10.42.42.10(pid=3856): Terminated {rc=256} 12:09:51.029669 --- ParallelTerminationStrategy: PID 3859 died... 12:09:51.085298 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3859): Terminated: ok {rc=0} 12:09:51.095574 --- ParallelTerminationStrategy: PID 3862 died... 12:09:51.151336 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3862): Terminated: ok {rc=0} 12:09:51.161729 --- ParallelTerminationStrategy: PID 3865 died... 12:09:51.217638 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3865): Terminated: ok {rc=0} 12:09:51.304071 bus /gobi_0: Setting Powered False 12:09:52.410577 bus /gobi_0: Setting Powered False 12:09:53.520327 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3863): Process ended prematurely: osmo-stp_10.42.42.5(pid=3863) [trial-2359↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3863)]