Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=11085): Process ended prematurely: osmo-stp_10.42.42.5(pid=11085) [trial-2364↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11085)]
Standard Output
---------------------------------------------- trial-2364 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 20:21:30.559843 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:30.571181 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 20:21:30.721219 tst cs_paging_gprs_active.py: using LAC 23485 20:21:30.854076 tst cs_paging_gprs_active.py: using RAC 25 20:21:30.990757 tst cs_paging_gprs_active.py: using CellId 23485 20:21:31.120249 tst cs_paging_gprs_active.py: using BVCI 23486 20:21:31.146437 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:31.159561 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:31.172282 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:31.183807 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:31.195398 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:31.206859 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:31.218600 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:31.229974 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:31.241554 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:21:31.366620 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:21:31.682417 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:21:31.824732 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:21:32.180670 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11075): Launched 20:21:32.463156 run iperf3-srv_10.42.42.10(pid=11076): Launched 20:21:32.664323 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:21:32.802605 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:21:33.140473 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11077): Launched 20:21:33.421925 run iperf3-srv_10.42.42.10(pid=11078): Launched 20:21:33.622280 tst cs_paging_gprs_active.py:38: start network... 20:21:33.759071 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:21:34.280232 run create_hlr_db(pid=11079): Launched 20:21:34.468404 bus /gobi_6: Setting Powered False 20:21:35.489360 run create_hlr_db(pid=11079): Terminated: ok {rc=0} 20:21:35.923860 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11081): Launched 20:21:36.250983 run osmo-hlr_10.42.42.2(pid=11082): Launched 20:21:36.371137 run osmo-stp_10.42.42.5: Starting osmo-stp 20:21:36.940292 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11084): Launched 20:21:37.267409 run osmo-stp_10.42.42.5(pid=11085): Launched 20:21:37.386279 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:21:37.956719 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11087): Launched 20:21:38.073728 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:21:38.359435 run patchelf(pid=11088): Launched 20:21:38.549990 run osmo-stp_10.42.42.5(pid=11085): ERR: Terminated: ERROR {rc=1} [trial-2364↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11085)] 20:21:38.689261 run osmo-stp_10.42.42.5(pid=11085): stdout: | (launched: 2022-12-09_20:21:37.107361) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:21:38.829331 run osmo-stp_10.42.42.5(pid=11085): stderr: | �[0;m�[38;5;43m20221209202137298 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209202137298 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209202137298 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209202137298 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209202137299 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209202137299 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209202137299 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:21:38.963944 run osmo-stp_10.42.42.5(pid=11085): stdout: | (launched: 2022-12-09_20:21:37.107361) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:21:39.097710 run osmo-stp_10.42.42.5(pid=11085): stderr: | �[0;m�[38;5;43m20221209202137298 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209202137298 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209202137298 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209202137298 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209202137299 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209202137299 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209202137299 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:21:39.253228 run patchelf(pid=11088): Terminating (SIGINT) 20:21:39.435052 run patchelf(pid=11088): Terminated: ok {rc=0} 20:21:39.468584 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11085): Process ended prematurely: osmo-stp_10.42.42.5(pid=11085) [trial-2364↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11085)] [trial-2364↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 20:21:39.478697 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 20:21:39.541337 run osmo-hlr_10.42.42.2(pid=11082): ERR: Terminated: ERROR {rc=237} [trial-2364↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11082)] 20:21:39.592399 run osmo-hlr_10.42.42.2(pid=11082): stdout: | (launched: 2022-12-09_20:21:36.090733) 20:21:39.644162 run osmo-hlr_10.42.42.2(pid=11082): stderr: | �[0;m�[1;31m20221209202136288 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209202136288 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209202136288 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209202136288 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209202136288 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209202136288 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209202136300 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209202136309 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209202136309 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209202136309 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:21:39.688227 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11075): Terminating (SIGTERM) 20:21:39.730074 run iperf3-srv_10.42.42.10(pid=11076): Terminating (SIGTERM) 20:21:39.771590 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11077): Terminating (SIGTERM) 20:21:39.813130 run iperf3-srv_10.42.42.10(pid=11078): Terminating (SIGTERM) 20:21:39.854792 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11081): Terminating (SIGTERM) 20:21:39.896181 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11084): Terminating (SIGTERM) 20:21:39.937815 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11087): Terminating (SIGTERM) 20:21:39.947712 --- ParallelTerminationStrategy: PID 11075 died... 20:21:40.003196 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11075): Terminated: ok {rc=0} 20:21:40.013133 --- ParallelTerminationStrategy: PID 11076 died... 20:21:40.068049 run iperf3-srv_10.42.42.10(pid=11076): Terminated {rc=256} 20:21:40.077952 --- ParallelTerminationStrategy: PID 11077 died... 20:21:40.133096 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11077): Terminated: ok {rc=0} 20:21:40.142960 --- ParallelTerminationStrategy: PID 11078 died... 20:21:40.198115 run iperf3-srv_10.42.42.10(pid=11078): Terminated {rc=256} 20:21:40.208020 --- ParallelTerminationStrategy: PID 11081 died... 20:21:40.263093 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11081): Terminated: ok {rc=0} 20:21:40.273041 --- ParallelTerminationStrategy: PID 11084 died... 20:21:40.327991 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11084): Terminated: ok {rc=0} 20:21:40.337968 --- ParallelTerminationStrategy: PID 11087 died... 20:21:40.393083 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11087): Terminated: ok {rc=0} 20:21:40.480222 bus /gobi_0: Setting Powered False 20:21:41.585953 bus /gobi_0: Setting Powered False 20:21:42.693624 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11085): Process ended prematurely: osmo-stp_10.42.42.5(pid=11085) [trial-2364↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11085)]