Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=8993): Process ended prematurely: osmo-stp_10.42.42.5(pid=8993) [trial-2380↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8993)]
Standard Output
---------------------------------------------- trial-2380 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 17:50:18.672141 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:50:18.684156 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 17:50:18.838452 tst cs_paging_gprs_active.py: using LAC 30472 17:50:18.957385 tst cs_paging_gprs_active.py: using RAC 127 17:50:19.076869 tst cs_paging_gprs_active.py: using CellId 30472 17:50:19.197514 tst cs_paging_gprs_active.py: using BVCI 30473 17:50:19.220922 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:50:19.231788 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:50:19.242429 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:50:19.254030 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:50:19.265517 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:50:19.276913 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:50:19.288483 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:50:19.299769 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:50:19.311414 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 17:50:19.435299 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 17:50:19.735240 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 17:50:19.873724 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:50:20.216058 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8983): Launched 17:50:20.501071 run iperf3-srv_10.42.42.10(pid=8984): Launched 17:50:20.703222 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 17:50:20.841791 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:50:21.182416 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8985): Launched 17:50:21.465494 run iperf3-srv_10.42.42.10(pid=8986): Launched 17:50:21.667055 tst cs_paging_gprs_active.py:38: start network... 17:50:21.804587 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:50:22.334534 run create_hlr_db(pid=8987): Launched 17:50:22.524691 bus /gobi_6: Setting Powered False 17:50:23.545796 run create_hlr_db(pid=8987): Terminated: ok {rc=0} 17:50:23.957573 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8989): Launched 17:50:24.265482 run osmo-hlr_10.42.42.2(pid=8990): Launched 17:50:24.385716 run osmo-stp_10.42.42.5: Starting osmo-stp 17:50:24.922985 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8992): Launched 17:50:25.233109 run osmo-stp_10.42.42.5(pid=8993): Launched 17:50:25.345815 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:50:25.881409 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8995): Launched 17:50:25.991833 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:50:26.261379 run patchelf(pid=8996): Launched 17:50:26.441283 run osmo-stp_10.42.42.5(pid=8993): ERR: Terminated: ERROR {rc=1} [trial-2380↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8993)] 17:50:26.572934 run osmo-stp_10.42.42.5(pid=8993): stdout: | (launched: 2022-12-12_17:50:25.078513) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:50:26.705528 run osmo-stp_10.42.42.5(pid=8993): stderr: | �[0;m�[38;5;43m20221212175025246 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212175025246 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212175025246 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212175025247 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212175025247 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212175025247 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212175025247 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:50:26.832344 run osmo-stp_10.42.42.5(pid=8993): stdout: | (launched: 2022-12-12_17:50:25.078513) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:50:26.958271 run osmo-stp_10.42.42.5(pid=8993): stderr: | �[0;m�[38;5;43m20221212175025246 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212175025246 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212175025246 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212175025247 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212175025247 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212175025247 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212175025247 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:50:27.105733 run patchelf(pid=8996): Terminating (SIGINT) 17:50:27.277943 run patchelf(pid=8996): Terminated: ok {rc=0} 17:50:27.309657 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8993): Process ended prematurely: osmo-stp_10.42.42.5(pid=8993) [trial-2380↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8993)] [trial-2380↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 17:50:27.318966 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 17:50:27.379850 run osmo-hlr_10.42.42.2(pid=8990): ERR: Terminated: ERROR {rc=237} [trial-2380↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8990)] 17:50:27.429842 run osmo-hlr_10.42.42.2(pid=8990): stdout: | (launched: 2022-12-12_17:50:24.113489) 17:50:27.479615 run osmo-hlr_10.42.42.2(pid=8990): stderr: | �[0;m�[1;31m20221212175024288 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212175024288 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212175024288 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212175024288 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212175024289 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212175024289 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212175024300 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212175024309 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212175024309 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212175024309 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:50:27.522478 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8983): Terminating (SIGTERM) 17:50:27.562605 run iperf3-srv_10.42.42.10(pid=8984): Terminating (SIGTERM) 17:50:27.602928 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8985): Terminating (SIGTERM) 17:50:27.643039 run iperf3-srv_10.42.42.10(pid=8986): Terminating (SIGTERM) 17:50:27.683184 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8989): Terminating (SIGTERM) 17:50:27.723265 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8992): Terminating (SIGTERM) 17:50:27.763429 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8995): Terminating (SIGTERM) 17:50:27.773221 --- ParallelTerminationStrategy: PID 8983 died... 17:50:27.827049 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8983): Terminated: ok {rc=0} 17:50:27.837323 --- ParallelTerminationStrategy: PID 8984 died... 17:50:27.890868 run iperf3-srv_10.42.42.10(pid=8984): Terminated {rc=256} 17:50:27.900811 --- ParallelTerminationStrategy: PID 8985 died... 17:50:27.954795 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8985): Terminated: ok {rc=0} 17:50:27.964628 --- ParallelTerminationStrategy: PID 8986 died... 17:50:28.018540 run iperf3-srv_10.42.42.10(pid=8986): Terminated {rc=256} 17:50:28.028300 --- ParallelTerminationStrategy: PID 8989 died... 17:50:28.081483 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8989): Terminated: ok {rc=0} 17:50:28.091622 --- ParallelTerminationStrategy: PID 8992 died... 17:50:28.145071 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8992): Terminated: ok {rc=0} 17:50:28.154769 --- ParallelTerminationStrategy: PID 8995 died... 17:50:28.209153 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8995): Terminated: ok {rc=0} 17:50:28.293134 bus /gobi_0: Setting Powered False 17:50:29.395985 bus /gobi_0: Setting Powered False 17:50:30.507275 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8993): Process ended prematurely: osmo-stp_10.42.42.5(pid=8993) [trial-2380↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8993)]