Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=7157): Process ended prematurely: osmo-stp_10.42.42.5(pid=7157) [trial-2391↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7157)]
Standard Output
---------------------------------------------- trial-2391 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 16:42:25.200281 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 16:42:25.211606 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 16:42:25.349794 tst cs_paging_gprs_active.py: using LAC 34912 16:42:25.481767 tst cs_paging_gprs_active.py: using RAC 232 16:42:25.611522 tst cs_paging_gprs_active.py: using CellId 34912 16:42:25.743045 tst cs_paging_gprs_active.py: using BVCI 34913 16:42:25.768690 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 16:42:25.780128 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 16:42:25.791443 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 16:42:25.802737 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 16:42:25.814183 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 16:42:25.825645 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 16:42:25.837334 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 16:42:25.848784 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 16:42:25.860502 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 16:42:25.980147 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 16:42:26.282127 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:42:26.421573 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:42:26.769909 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7147): Launched 16:42:27.059758 run iperf3-srv_10.42.42.10(pid=7148): Launched 16:42:27.264611 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:42:27.404537 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:42:27.753272 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7149): Launched 16:42:28.042023 run iperf3-srv_10.42.42.10(pid=7150): Launched 16:42:28.246009 tst cs_paging_gprs_active.py:38: start network... 16:42:28.385705 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:42:28.913449 run create_hlr_db(pid=7151): Launched 16:42:29.105425 bus /sierra_2: Setting Powered False 16:42:30.126788 run create_hlr_db(pid=7151): Terminated: ok {rc=0} 16:42:30.545581 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7153): Launched 16:42:30.898333 run osmo-hlr_10.42.42.2(pid=7154): Launched 16:42:31.064170 run osmo-stp_10.42.42.5: Starting osmo-stp 16:42:31.670212 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7156): Launched 16:42:32.054160 run osmo-stp_10.42.42.5(pid=7157): Launched 16:42:32.331532 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:42:32.954515 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7159): Launched 16:42:33.073693 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:42:33.367594 run patchelf(pid=7160): Launched 16:42:33.562559 run osmo-stp_10.42.42.5(pid=7157): ERR: Terminated: ERROR {rc=1} [trial-2391↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7157)] 16:42:33.705068 run osmo-stp_10.42.42.5(pid=7157): stdout: | (launched: 2022-12-13_16:42:31.862390) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:42:33.847341 run osmo-stp_10.42.42.5(pid=7157): stderr: | �[0;m�[38;5;43m20221213164232272 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213164232272 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213164232272 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213164232273 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213164232274 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213164232274 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213164232274 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:42:33.984464 run osmo-stp_10.42.42.5(pid=7157): stdout: | (launched: 2022-12-13_16:42:31.862390) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:42:34.120447 run osmo-stp_10.42.42.5(pid=7157): stderr: | �[0;m�[38;5;43m20221213164232272 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213164232272 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213164232272 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213164232273 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213164232274 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213164232274 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213164232274 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:42:34.279745 run patchelf(pid=7160): Terminating (SIGINT) 16:42:34.466845 run patchelf(pid=7160): Terminated: ok {rc=0} 16:42:34.501051 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7157): Process ended prematurely: osmo-stp_10.42.42.5(pid=7157) [trial-2391↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7157)] [trial-2391↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 16:42:34.511143 tst cs_paging_gprs_active.py:38: Test FAILED (9.3 sec) 16:42:34.575527 run osmo-hlr_10.42.42.2(pid=7154): ERR: Terminated: ERROR {rc=237} [trial-2391↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7154)] 16:42:34.627540 run osmo-hlr_10.42.42.2(pid=7154): stdout: | (launched: 2022-12-13_16:42:30.705028) 16:42:34.680121 run osmo-hlr_10.42.42.2(pid=7154): stderr: | �[0;m�[1;31m20221213164230984 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213164230984 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213164230984 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213164230984 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213164230984 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213164230984 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213164231007 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2391/run.2022-12-13_15-37-59/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213164231024 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213164231024 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213164231024 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:42:34.725213 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7147): Terminating (SIGTERM) 16:42:34.767660 run iperf3-srv_10.42.42.10(pid=7148): Terminating (SIGTERM) 16:42:34.810229 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7149): Terminating (SIGTERM) 16:42:34.852407 run iperf3-srv_10.42.42.10(pid=7150): Terminating (SIGTERM) 16:42:34.894835 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7153): Terminating (SIGTERM) 16:42:34.937170 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7156): Terminating (SIGTERM) 16:42:34.979515 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7159): Terminating (SIGTERM) 16:42:34.988902 --- ParallelTerminationStrategy: PID 7147 died... 16:42:35.045945 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7147): Terminated: ok {rc=0} 16:42:35.056116 --- ParallelTerminationStrategy: PID 7148 died... 16:42:35.112222 run iperf3-srv_10.42.42.10(pid=7148): Terminated {rc=256} 16:42:35.122194 --- ParallelTerminationStrategy: PID 7149 died... 16:42:35.178164 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7149): Terminated: ok {rc=0} 16:42:35.188111 --- ParallelTerminationStrategy: PID 7150 died... 16:42:35.244180 run iperf3-srv_10.42.42.10(pid=7150): Terminated {rc=256} 16:42:35.254191 --- ParallelTerminationStrategy: PID 7153 died... 16:42:35.310385 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7153): Terminated: ok {rc=0} 16:42:35.320419 --- ParallelTerminationStrategy: PID 7156 died... 16:42:35.376625 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7156): Terminated: ok {rc=0} 16:42:35.386709 --- ParallelTerminationStrategy: PID 7159 died... 16:42:35.443014 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7159): Terminated: ok {rc=0} 16:42:35.530048 bus /gobi_0: Setting Powered False 16:42:36.631774 bus /gobi_0: Setting Powered False 16:42:37.738891 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7157): Process ended prematurely: osmo-stp_10.42.42.5(pid=7157) [trial-2391↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7157)]