Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=6658): Process ended prematurely: osmo-stp_10.42.42.5(pid=6658) [trial-2395↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6658)]
Standard Output
---------------------------------------------- trial-2395 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 22:10:48.662243 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:10:48.674528 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 22:10:48.824420 tst cs_paging_gprs_active.py: using LAC 36558 22:10:48.952557 tst cs_paging_gprs_active.py: using RAC 93 22:10:49.080667 tst cs_paging_gprs_active.py: using CellId 36558 22:10:49.213481 tst cs_paging_gprs_active.py: using BVCI 36559 22:10:49.238725 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:10:49.250471 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:10:49.262020 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:10:49.273529 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:10:49.285538 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:10:49.297497 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:10:49.309632 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:10:49.321571 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:10:49.333894 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 22:10:49.456814 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 22:10:49.741256 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:10:49.869035 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:10:50.187380 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6645): Launched 22:10:50.451016 run iperf3-srv_10.42.42.10(pid=6646): Launched 22:10:50.638645 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:10:50.765792 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:10:51.082377 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6647): Launched 22:10:51.346498 run iperf3-srv_10.42.42.10(pid=6648): Launched 22:10:51.533685 tst cs_paging_gprs_active.py:38: start network... 22:10:51.661657 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:10:52.162127 run create_hlr_db(pid=6652): Launched 22:10:52.338120 bus /gobi_6: Setting Powered False 22:10:53.359326 run create_hlr_db(pid=6652): Terminated: ok {rc=0} 22:10:53.793027 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6654): Launched 22:10:54.121970 run osmo-hlr_10.42.42.2(pid=6655): Launched 22:10:54.242428 run osmo-stp_10.42.42.5: Starting osmo-stp 22:10:54.811529 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6657): Launched 22:10:55.141303 run osmo-stp_10.42.42.5(pid=6658): Launched 22:10:55.262709 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:10:55.834794 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6660): Launched 22:10:55.952323 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:10:56.237587 run patchelf(pid=6661): Launched 22:10:56.429568 run osmo-stp_10.42.42.5(pid=6658): ERR: Terminated: ERROR {rc=1} [trial-2395↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6658)] 22:10:56.569984 run osmo-stp_10.42.42.5(pid=6658): stdout: | (launched: 2022-12-13_22:10:54.978058) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:10:56.710653 run osmo-stp_10.42.42.5(pid=6658): stderr: | �[0;m�[38;5;43m20221213221055173 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213221055173 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213221055173 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213221055174 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213221055174 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213221055174 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213221055174 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:10:56.846524 run osmo-stp_10.42.42.5(pid=6658): stdout: | (launched: 2022-12-13_22:10:54.978058) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:10:56.981010 run osmo-stp_10.42.42.5(pid=6658): stderr: | �[0;m�[38;5;43m20221213221055173 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213221055173 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213221055173 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213221055174 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213221055174 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213221055174 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213221055174 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:10:57.137647 run patchelf(pid=6661): Terminating (SIGINT) 22:10:57.320848 run patchelf(pid=6661): Terminated: ok {rc=0} 22:10:57.354643 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=6658): Process ended prematurely: osmo-stp_10.42.42.5(pid=6658) [trial-2395↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6658)] [trial-2395↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 22:10:57.364661 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 22:10:57.428618 run osmo-hlr_10.42.42.2(pid=6655): ERR: Terminated: ERROR {rc=237} [trial-2395↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6655)] 22:10:57.480554 run osmo-hlr_10.42.42.2(pid=6655): stdout: | (launched: 2022-12-13_22:10:53.959603) 22:10:57.533054 run osmo-hlr_10.42.42.2(pid=6655): stderr: | �[0;m�[1;31m20221213221054158 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213221054158 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213221054158 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213221054158 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213221054158 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213221054158 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213221054170 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2395/run.2022-12-13_21-44-31/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213221054179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213221054179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213221054179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:10:57.577795 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6645): Terminating (SIGTERM) 22:10:57.619929 run iperf3-srv_10.42.42.10(pid=6646): Terminating (SIGTERM) 22:10:57.662224 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6647): Terminating (SIGTERM) 22:10:57.704391 run iperf3-srv_10.42.42.10(pid=6648): Terminating (SIGTERM) 22:10:57.747011 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6654): Terminating (SIGTERM) 22:10:57.789370 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6657): Terminating (SIGTERM) 22:10:57.832025 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6660): Terminating (SIGTERM) 22:10:57.841820 --- ParallelTerminationStrategy: PID 6645 died... 22:10:57.898332 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6645): Terminated: ok {rc=0} 22:10:57.908416 --- ParallelTerminationStrategy: PID 6646 died... 22:10:57.964583 run iperf3-srv_10.42.42.10(pid=6646): Terminated {rc=256} 22:10:57.974536 --- ParallelTerminationStrategy: PID 6647 died... 22:10:58.030548 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6647): Terminated: ok {rc=0} 22:10:58.040494 --- ParallelTerminationStrategy: PID 6648 died... 22:10:58.096674 run iperf3-srv_10.42.42.10(pid=6648): Terminated {rc=256} 22:10:58.106661 --- ParallelTerminationStrategy: PID 6654 died... 22:10:58.162706 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6654): Terminated: ok {rc=0} 22:10:58.172691 --- ParallelTerminationStrategy: PID 6657 died... 22:10:58.228721 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6657): Terminated: ok {rc=0} 22:10:58.238766 --- ParallelTerminationStrategy: PID 6660 died... 22:10:58.295067 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6660): Terminated: ok {rc=0} 22:10:58.383440 bus /gobi_0: Setting Powered False 22:10:59.487815 bus /gobi_0: Setting Powered False 22:11:00.597914 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6658): Process ended prematurely: osmo-stp_10.42.42.5(pid=6658) [trial-2395↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6658)]