Failed
gprs:trx-lms+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=8595): Process ended prematurely: osmo-stp_10.42.42.5(pid=8595) [trial-2395↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8595)]
Standard Output
---------------------------------------------- trial-2395 gprs:trx-lms+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 22:34:45.669298 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:34:45.680457 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 22:34:45.845785 tst cs_paging_gprs_active.py: using LAC 36686 22:34:45.981914 tst cs_paging_gprs_active.py: using RAC 221 22:34:46.116580 tst cs_paging_gprs_active.py: using CellId 36686 22:34:46.270877 tst cs_paging_gprs_active.py: using BVCI 36687 22:34:46.305112 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:34:46.320844 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:34:46.336634 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:34:46.351839 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:34:46.365451 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:34:46.378590 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:34:46.391032 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:34:46.403960 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:34:46.416662 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:34:46.537811 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:34:46.868699 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:34:47.038134 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:34:47.393738 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8585): Launched 22:34:47.670916 run iperf3-srv_10.42.42.10(pid=8586): Launched 22:34:47.868798 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:34:48.003759 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:34:48.337906 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8587): Launched 22:34:48.614151 run iperf3-srv_10.42.42.10(pid=8588): Launched 22:34:48.811136 tst cs_paging_gprs_active.py:38: start network... 22:34:48.945624 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:34:49.453861 run create_hlr_db(pid=8589): Launched 22:34:49.639845 bus /gobi_6: Setting Powered False 22:34:50.661813 run create_hlr_db(pid=8589): Terminated: ok {rc=0} 22:34:51.073564 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8591): Launched 22:34:51.396273 run osmo-hlr_10.42.42.2(pid=8592): Launched 22:34:51.515415 run osmo-stp_10.42.42.5: Starting osmo-stp 22:34:52.072882 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8594): Launched 22:34:52.395415 run osmo-stp_10.42.42.5(pid=8595): Launched 22:34:52.511583 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:34:53.071428 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8597): Launched 22:34:53.187791 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:34:53.475426 run patchelf(pid=8598): Launched 22:34:53.664527 run osmo-stp_10.42.42.5(pid=8595): ERR: Terminated: ERROR {rc=1} [trial-2395↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8595)] 22:34:53.802722 run osmo-stp_10.42.42.5(pid=8595): stdout: | (launched: 2022-12-13_22:34:52.236446) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:34:53.940932 run osmo-stp_10.42.42.5(pid=8595): stderr: | �[0;m�[38;5;43m20221213223452429 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213223452429 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213223452429 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213223452430 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213223452430 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213223452430 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213223452430 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:34:54.074874 run osmo-stp_10.42.42.5(pid=8595): stdout: | (launched: 2022-12-13_22:34:52.236446) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:34:54.207688 run osmo-stp_10.42.42.5(pid=8595): stderr: | �[0;m�[38;5;43m20221213223452429 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213223452429 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213223452429 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213223452430 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213223452430 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213223452430 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213223452430 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:34:54.362212 run patchelf(pid=8598): Terminating (SIGINT) 22:34:54.543314 run patchelf(pid=8598): Terminated: ok {rc=0} 22:34:54.576312 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8595): Process ended prematurely: osmo-stp_10.42.42.5(pid=8595) [trial-2395↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8595)] [trial-2395↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 22:34:54.586245 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 22:34:54.649853 run osmo-hlr_10.42.42.2(pid=8592): ERR: Terminated: ERROR {rc=237} [trial-2395↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8592)] 22:34:54.701446 run osmo-hlr_10.42.42.2(pid=8592): stdout: | (launched: 2022-12-13_22:34:51.237716) 22:34:54.753817 run osmo-hlr_10.42.42.2(pid=8592): stderr: | �[0;m�[1;31m20221213223451435 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213223451436 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213223451436 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213223451436 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213223451436 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213223451436 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213223451447 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2395/run.2022-12-13_21-44-31/gprs:trx-lms+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213223451456 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213223451456 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213223451456 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:34:54.798650 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8585): Terminating (SIGTERM) 22:34:54.840752 run iperf3-srv_10.42.42.10(pid=8586): Terminating (SIGTERM) 22:34:54.882982 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8587): Terminating (SIGTERM) 22:34:54.924782 run iperf3-srv_10.42.42.10(pid=8588): Terminating (SIGTERM) 22:34:54.966718 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8591): Terminating (SIGTERM) 22:34:55.008515 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8594): Terminating (SIGTERM) 22:34:55.050302 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8597): Terminating (SIGTERM) 22:34:55.059962 --- ParallelTerminationStrategy: PID 8585 died... 22:34:55.116395 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8585): Terminated: ok {rc=0} 22:34:55.126467 --- ParallelTerminationStrategy: PID 8586 died... 22:34:55.182810 run iperf3-srv_10.42.42.10(pid=8586): Terminated {rc=256} 22:34:55.192796 --- ParallelTerminationStrategy: PID 8587 died... 22:34:55.249012 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8587): Terminated: ok {rc=0} 22:34:55.259082 --- ParallelTerminationStrategy: PID 8588 died... 22:34:55.314953 run iperf3-srv_10.42.42.10(pid=8588): Terminated {rc=256} 22:34:55.324943 --- ParallelTerminationStrategy: PID 8591 died... 22:34:55.380790 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8591): Terminated: ok {rc=0} 22:34:55.390847 --- ParallelTerminationStrategy: PID 8594 died... 22:34:55.446879 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8594): Terminated: ok {rc=0} 22:34:55.456913 --- ParallelTerminationStrategy: PID 8597 died... 22:34:55.512886 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8597): Terminated: ok {rc=0} 22:34:55.600569 bus /gobi_0: Setting Powered False 22:34:56.704579 bus /gobi_0: Setting Powered False 22:34:57.811795 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8595): Process ended prematurely: osmo-stp_10.42.42.5(pid=8595) [trial-2395↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8595)]