Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=8527): Process ended prematurely: osmo-stp_10.42.42.5(pid=8527) [trial-2395↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8527)]
Standard Output
---------------------------------------------- trial-2395 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 22:33:45.551305 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:33:45.562486 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 22:33:45.708266 tst cs_paging_gprs_active.py: using LAC 36681 22:33:45.837617 tst cs_paging_gprs_active.py: using RAC 216 22:33:45.982867 tst cs_paging_gprs_active.py: using CellId 36681 22:33:46.104876 tst cs_paging_gprs_active.py: using BVCI 36682 22:33:46.129600 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:33:46.141363 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:33:46.152825 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:33:46.164415 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:33:46.175735 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:33:46.187192 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:33:46.198651 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:33:46.210492 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:33:46.221881 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 22:33:46.370535 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 22:33:46.680820 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:33:46.818314 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:33:47.186604 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8517): Launched 22:33:47.464528 run iperf3-srv_10.42.42.10(pid=8518): Launched 22:33:47.661864 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:33:47.796249 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:33:48.129231 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8519): Launched 22:33:48.406373 run iperf3-srv_10.42.42.10(pid=8520): Launched 22:33:48.603803 tst cs_paging_gprs_active.py:38: start network... 22:33:48.738819 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:33:49.243890 run create_hlr_db(pid=8521): Launched 22:33:49.429218 bus /gobi_6: Setting Powered False 22:33:50.451145 run create_hlr_db(pid=8521): Terminated: ok {rc=0} 22:33:50.853563 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8523): Launched 22:33:51.153905 run osmo-hlr_10.42.42.2(pid=8524): Launched 22:33:51.272442 run osmo-stp_10.42.42.5: Starting osmo-stp 22:33:51.797844 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8526): Launched 22:33:52.095817 run osmo-stp_10.42.42.5(pid=8527): Launched 22:33:52.204774 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:33:52.727182 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8529): Launched 22:33:52.833615 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:33:53.094406 run patchelf(pid=8530): Launched 22:33:53.271735 run osmo-stp_10.42.42.5(pid=8527): ERR: Terminated: ERROR {rc=1} [trial-2395↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8527)] 22:33:53.400084 run osmo-stp_10.42.42.5(pid=8527): stdout: | (launched: 2022-12-13_22:33:51.949129) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:33:53.528559 run osmo-stp_10.42.42.5(pid=8527): stderr: | �[0;m�[38;5;43m20221213223352117 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213223352118 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213223352118 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213223352118 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213223352119 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213223352119 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213223352119 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:33:53.652532 run osmo-stp_10.42.42.5(pid=8527): stdout: | (launched: 2022-12-13_22:33:51.949129) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:33:53.775446 run osmo-stp_10.42.42.5(pid=8527): stderr: | �[0;m�[38;5;43m20221213223352117 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213223352118 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213223352118 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213223352118 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213223352119 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213223352119 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213223352119 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:33:53.918851 run patchelf(pid=8530): Terminating (SIGINT) 22:33:54.086929 run patchelf(pid=8530): Terminated: ok {rc=0} 22:33:54.118012 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8527): Process ended prematurely: osmo-stp_10.42.42.5(pid=8527) [trial-2395↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8527)] [trial-2395↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 22:33:54.127055 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 22:33:54.186536 run osmo-hlr_10.42.42.2(pid=8524): ERR: Terminated: ERROR {rc=237} [trial-2395↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8524)] 22:33:54.235708 run osmo-hlr_10.42.42.2(pid=8524): stdout: | (launched: 2022-12-13_22:33:51.005861) 22:33:54.284797 run osmo-hlr_10.42.42.2(pid=8524): stderr: | �[0;m�[1;31m20221213223351182 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213223351182 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213223351182 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213223351182 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213223351182 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213223351182 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213223351194 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2395/run.2022-12-13_21-44-31/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213223351205 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213223351205 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213223351205 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:33:54.326620 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8517): Terminating (SIGTERM) 22:33:54.365975 run iperf3-srv_10.42.42.10(pid=8518): Terminating (SIGTERM) 22:33:54.405226 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8519): Terminating (SIGTERM) 22:33:54.444501 run iperf3-srv_10.42.42.10(pid=8520): Terminating (SIGTERM) 22:33:54.483982 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8523): Terminating (SIGTERM) 22:33:54.523205 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8526): Terminating (SIGTERM) 22:33:54.562622 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8529): Terminating (SIGTERM) 22:33:54.571815 --- ParallelTerminationStrategy: PID 8517 died... 22:33:54.624914 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8517): Terminated: ok {rc=0} 22:33:54.634898 --- ParallelTerminationStrategy: PID 8518 died... 22:33:54.687563 run iperf3-srv_10.42.42.10(pid=8518): Terminated {rc=256} 22:33:54.697144 --- ParallelTerminationStrategy: PID 8519 died... 22:33:54.749675 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8519): Terminated: ok {rc=0} 22:33:54.759244 --- ParallelTerminationStrategy: PID 8520 died... 22:33:54.811524 run iperf3-srv_10.42.42.10(pid=8520): Terminated {rc=256} 22:33:54.821124 --- ParallelTerminationStrategy: PID 8523 died... 22:33:54.873439 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8523): Terminated: ok {rc=0} 22:33:54.882987 --- ParallelTerminationStrategy: PID 8526 died... 22:33:54.935119 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8526): Terminated: ok {rc=0} 22:33:54.944573 --- ParallelTerminationStrategy: PID 8529 died... 22:33:54.996755 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8529): Terminated: ok {rc=0} 22:33:55.079897 bus /gobi_0: Setting Powered False 22:33:56.186846 bus /gobi_0: Setting Powered False 22:33:57.299103 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8527): Process ended prematurely: osmo-stp_10.42.42.5(pid=8527) [trial-2395↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8527)]