Failed
gprs:trx-lms-limenet-micro.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=9283): Process ended prematurely: osmo-stp_10.42.42.5(pid=9283) [trial-2395↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9283)]
Standard Output
---------------------------------------------- trial-2395 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py ---------------------------------------------- 22:40:41.169145 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 22:40:41.180371 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 22:40:41.321241 tst cs_paging_gprs_active.py: using LAC 36718 22:40:41.449254 tst cs_paging_gprs_active.py: using RAC 253 22:40:41.577415 tst cs_paging_gprs_active.py: using CellId 36718 22:40:41.703860 tst cs_paging_gprs_active.py: using BVCI 36719 22:40:41.728435 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 22:40:41.739711 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 22:40:41.750835 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 22:40:41.761837 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 22:40:41.773066 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 22:40:41.784151 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 22:40:41.795655 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 22:40:41.806984 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 22:40:41.818429 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 22:40:41.935128 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 22:40:42.213128 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:40:42.339471 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:40:42.653622 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9273): Launched 22:40:42.915901 run iperf3-srv_10.42.42.10(pid=9274): Launched 22:40:43.100637 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:40:43.226367 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:40:43.539175 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9275): Launched 22:40:43.798928 run iperf3-srv_10.42.42.10(pid=9276): Launched 22:40:43.983141 tst cs_paging_gprs_active.py:38: start network... 22:40:44.108498 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:40:44.593247 run create_hlr_db(pid=9277): Launched 22:40:44.766327 bus /sierra_2: Setting Powered False 22:40:45.788937 run create_hlr_db(pid=9277): Terminated: ok {rc=0} 22:40:46.256120 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9279): Launched 22:40:46.707729 run osmo-hlr_10.42.42.2(pid=9280): Launched 22:40:46.915293 run osmo-stp_10.42.42.5: Starting osmo-stp 22:40:47.471382 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9282): Launched 22:40:47.773826 run osmo-stp_10.42.42.5(pid=9283): Launched 22:40:47.883619 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:40:48.411282 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9285): Launched 22:40:48.518765 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:40:48.783029 run patchelf(pid=9286): Launched 22:40:48.959935 run osmo-stp_10.42.42.5(pid=9283): ERR: Terminated: ERROR {rc=1} [trial-2395↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9283)] 22:40:49.089397 run osmo-stp_10.42.42.5(pid=9283): stdout: | (launched: 2022-12-13_22:40:47.624597) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:40:49.219187 run osmo-stp_10.42.42.5(pid=9283): stderr: | �[0;m�[38;5;43m20221213224047794 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213224047794 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213224047794 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213224047795 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213224047797 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213224047797 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213224047797 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:40:49.344249 run osmo-stp_10.42.42.5(pid=9283): stdout: | (launched: 2022-12-13_22:40:47.624597) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:40:49.467992 run osmo-stp_10.42.42.5(pid=9283): stderr: | �[0;m�[38;5;43m20221213224047794 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213224047794 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213224047794 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213224047795 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213224047797 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213224047797 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213224047797 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:40:49.612326 run patchelf(pid=9286): Terminating (SIGINT) 22:40:49.781679 run patchelf(pid=9286): Terminated: ok {rc=0} 22:40:49.812873 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=9283): Process ended prematurely: osmo-stp_10.42.42.5(pid=9283) [trial-2395↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9283)] [trial-2395↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38] 22:40:49.822074 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 22:40:49.881475 run osmo-hlr_10.42.42.2(pid=9280): ERR: Terminated: ERROR {rc=237} [trial-2395↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9280)] 22:40:49.930079 run osmo-hlr_10.42.42.2(pid=9280): stdout: | (launched: 2022-12-13_22:40:46.428072) 22:40:49.979454 run osmo-hlr_10.42.42.2(pid=9280): stderr: | �[0;m�[1;31m20221213224046676 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213224046676 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213224046676 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213224046676 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213224046676 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213224046676 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213224046693 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2395/run.2022-12-13_21-44-31/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213224046710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213224046710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213224046710 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:40:50.021346 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9273): Terminating (SIGTERM) 22:40:50.060807 run iperf3-srv_10.42.42.10(pid=9274): Terminating (SIGTERM) 22:40:50.100277 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9275): Terminating (SIGTERM) 22:40:50.139553 run iperf3-srv_10.42.42.10(pid=9276): Terminating (SIGTERM) 22:40:50.178919 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9279): Terminating (SIGTERM) 22:40:50.218122 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9282): Terminating (SIGTERM) 22:40:50.257526 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9285): Terminating (SIGTERM) 22:40:50.266875 --- ParallelTerminationStrategy: PID 9273 died... 22:40:50.319795 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9273): Terminated: ok {rc=0} 22:40:50.329505 --- ParallelTerminationStrategy: PID 9274 died... 22:40:50.381940 run iperf3-srv_10.42.42.10(pid=9274): Terminated {rc=256} 22:40:50.391452 --- ParallelTerminationStrategy: PID 9275 died... 22:40:50.444116 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9275): Terminated: ok {rc=0} 22:40:50.453758 --- ParallelTerminationStrategy: PID 9276 died... 22:40:50.506336 run iperf3-srv_10.42.42.10(pid=9276): Terminated {rc=256} 22:40:50.515917 --- ParallelTerminationStrategy: PID 9279 died... 22:40:50.568360 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9279): Terminated: ok {rc=0} 22:40:50.577983 --- ParallelTerminationStrategy: PID 9282 died... 22:40:50.630479 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9282): Terminated: ok {rc=0} 22:40:50.640042 --- ParallelTerminationStrategy: PID 9285 died... 22:40:50.692698 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9285): Terminated: ok {rc=0} 22:40:50.780732 bus /gobi_0: Setting Powered False 22:40:51.883656 bus /gobi_0: Setting Powered False 22:40:52.995161 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9283): Process ended prematurely: osmo-stp_10.42.42.5(pid=9283) [trial-2395↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9283)]