Failed
gprs:trx-lms.cs_paging_gprs_active.py (from gprs_trx-lms)
Stacktrace
osmo-stp_10.42.42.5(pid=24090): Process ended prematurely: osmo-stp_10.42.42.5(pid=24090) [trial-2397↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24090)]
Standard Output
---------------------------------------------- trial-2397 gprs:trx-lms cs_paging_gprs_active.py ---------------------------------------------- 01:28:44.326028 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 01:28:44.336633 tst gprs:trx-lms: Using 1 x bts (candidates: 1) 01:28:44.471647 tst cs_paging_gprs_active.py: using LAC 37598 01:28:44.591922 tst cs_paging_gprs_active.py: using RAC 113 01:28:44.714210 tst cs_paging_gprs_active.py: using CellId 37598 01:28:44.831554 tst cs_paging_gprs_active.py: using BVCI 37599 01:28:44.854724 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 01:28:44.865362 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 01:28:44.875653 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 01:28:44.886166 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 01:28:44.896650 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 01:28:44.907239 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 01:28:44.917980 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 01:28:44.928453 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 01:28:44.939166 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 01:28:45.058496 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 01:28:45.354425 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:28:45.489916 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:28:45.830221 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24080): Launched 01:28:46.142512 run iperf3-srv_10.42.42.10(pid=24081): Launched 01:28:46.350117 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:28:46.488226 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:28:46.840895 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24082): Launched 01:28:47.153278 run iperf3-srv_10.42.42.10(pid=24083): Launched 01:28:47.341983 tst cs_paging_gprs_active.py:38: start network... 01:28:47.468567 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:28:47.953578 run create_hlr_db(pid=24084): Launched 01:28:48.127311 bus /sierra_2: Setting Powered False 01:28:49.149628 run create_hlr_db(pid=24084): Terminated: ok {rc=0} 01:28:49.583104 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24086): Launched 01:28:49.909018 run osmo-hlr_10.42.42.2(pid=24087): Launched 01:28:50.026369 run osmo-stp_10.42.42.5: Starting osmo-stp 01:28:50.594314 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24089): Launched 01:28:50.919897 run osmo-stp_10.42.42.5(pid=24090): Launched 01:28:51.037293 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:28:51.605626 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24092): Launched 01:28:51.720941 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:28:52.006256 run patchelf(pid=24093): Launched 01:28:52.196002 run osmo-stp_10.42.42.5(pid=24090): ERR: Terminated: ERROR {rc=1} [trial-2397↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24090)] 01:28:52.335198 run osmo-stp_10.42.42.5(pid=24090): stdout: | (launched: 2022-12-14_01:28:50.758633) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:28:52.474710 run osmo-stp_10.42.42.5(pid=24090): stderr: | �[0;m�[38;5;43m20221214012850953 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214012850953 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214012850954 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214012850954 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214012850954 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214012850955 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214012850955 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:28:52.608499 run osmo-stp_10.42.42.5(pid=24090): stdout: | (launched: 2022-12-14_01:28:50.758633) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:28:52.741268 run osmo-stp_10.42.42.5(pid=24090): stderr: | �[0;m�[38;5;43m20221214012850953 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214012850953 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214012850954 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214012850954 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214012850954 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214012850955 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214012850955 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:28:52.895738 run patchelf(pid=24093): Terminating (SIGINT) 01:28:53.077144 run patchelf(pid=24093): Terminated: ok {rc=0} 01:28:53.110413 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=24090): Process ended prematurely: osmo-stp_10.42.42.5(pid=24090) [trial-2397↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24090)] [trial-2397↪gprs:trx-lms↪cs_paging_gprs_active.py:38] 01:28:53.120253 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 01:28:53.183663 run osmo-hlr_10.42.42.2(pid=24087): ERR: Terminated: ERROR {rc=237} [trial-2397↪gprs:trx-lms↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24087)] 01:28:53.235048 run osmo-hlr_10.42.42.2(pid=24087): stdout: | (launched: 2022-12-14_01:28:49.747929) 01:28:53.287038 run osmo-hlr_10.42.42.2(pid=24087): stderr: | �[0;m�[1;31m20221214012849949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214012849949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214012849949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214012849949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214012849950 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214012849950 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214012849962 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2397/run.2022-12-14_00-40-22/gprs:trx-lms/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214012849973 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214012849973 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214012849973 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:28:53.331554 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24080): Terminating (SIGTERM) 01:28:53.374073 run iperf3-srv_10.42.42.10(pid=24081): Terminating (SIGTERM) 01:28:53.415981 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24082): Terminating (SIGTERM) 01:28:53.458249 run iperf3-srv_10.42.42.10(pid=24083): Terminating (SIGTERM) 01:28:53.500075 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24086): Terminating (SIGTERM) 01:28:53.542271 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24089): Terminating (SIGTERM) 01:28:53.584111 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24092): Terminating (SIGTERM) 01:28:53.593743 --- ParallelTerminationStrategy: PID 24080 died... 01:28:53.650293 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24080): Terminated: ok {rc=0} 01:28:53.660309 --- ParallelTerminationStrategy: PID 24081 died... 01:28:53.716019 run iperf3-srv_10.42.42.10(pid=24081): Terminated {rc=256} 01:28:53.725942 --- ParallelTerminationStrategy: PID 24082 died... 01:28:53.781693 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24082): Terminated: ok {rc=0} 01:28:53.791591 --- ParallelTerminationStrategy: PID 24083 died... 01:28:53.847175 run iperf3-srv_10.42.42.10(pid=24083): Terminated {rc=256} 01:28:53.857217 --- ParallelTerminationStrategy: PID 24086 died... 01:28:53.912717 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24086): Terminated: ok {rc=0} 01:28:53.922611 --- ParallelTerminationStrategy: PID 24089 died... 01:28:53.978153 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24089): Terminated: ok {rc=0} 01:28:53.988055 --- ParallelTerminationStrategy: PID 24092 died... 01:28:54.043680 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24092): Terminated: ok {rc=0} 01:28:54.130932 bus /gobi_0: Setting Powered False 01:28:55.233282 bus /gobi_0: Setting Powered False 01:28:56.343460 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24090): Process ended prematurely: osmo-stp_10.42.42.5(pid=24090) [trial-2397↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24090)]