Failed
gprs:trx-lms+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=24231): Process ended prematurely: osmo-stp_10.42.42.5(pid=24231) [trial-2397↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24231)]
Standard Output
---------------------------------------------- trial-2397 gprs:trx-lms+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 01:30:44.687277 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:30:44.698175 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 01:30:44.852223 tst cs_paging_gprs_active.py: using LAC 37608 01:30:44.973978 tst cs_paging_gprs_active.py: using RAC 123 01:30:45.091556 tst cs_paging_gprs_active.py: using CellId 37608 01:30:45.209124 tst cs_paging_gprs_active.py: using BVCI 37609 01:30:45.232303 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:30:45.243180 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:30:45.253938 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:30:45.264574 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:30:45.275236 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:30:45.286009 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:30:45.296728 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:30:45.307603 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:30:45.318491 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 01:30:45.439705 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 01:30:45.718850 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:30:45.866857 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:30:46.243201 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24221): Launched 01:30:46.531403 run iperf3-srv_10.42.42.10(pid=24222): Launched 01:30:46.721354 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:30:46.850863 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:30:47.215175 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24223): Launched 01:30:47.497076 run iperf3-srv_10.42.42.10(pid=24224): Launched 01:30:47.696402 tst cs_paging_gprs_active.py:38: start network... 01:30:47.832147 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:30:48.344744 run create_hlr_db(pid=24225): Launched 01:30:48.533301 bus /gobi_6: Setting Powered False 01:30:49.555043 run create_hlr_db(pid=24225): Terminated: ok {rc=0} 01:30:49.989842 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24227): Launched 01:30:50.317824 run osmo-hlr_10.42.42.2(pid=24228): Launched 01:30:50.435120 run osmo-stp_10.42.42.5: Starting osmo-stp 01:30:51.005989 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24230): Launched 01:30:51.332999 run osmo-stp_10.42.42.5(pid=24231): Launched 01:30:51.451236 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:30:52.021769 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24233): Launched 01:30:52.129647 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:30:52.405320 run patchelf(pid=24235): Launched 01:30:52.582778 run osmo-stp_10.42.42.5(pid=24231): ERR: Terminated: ERROR {rc=1} [trial-2397↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24231)] 01:30:52.712086 run osmo-stp_10.42.42.5(pid=24231): stdout: | (launched: 2022-12-14_01:30:51.170854) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:30:52.842011 run osmo-stp_10.42.42.5(pid=24231): stderr: | �[0;m�[38;5;43m20221214013051364 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214013051364 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214013051364 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214013051365 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214013051365 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214013051365 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214013051365 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:30:52.967690 run osmo-stp_10.42.42.5(pid=24231): stdout: | (launched: 2022-12-14_01:30:51.170854) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:30:53.091624 run osmo-stp_10.42.42.5(pid=24231): stderr: | �[0;m�[38;5;43m20221214013051364 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214013051364 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214013051364 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214013051365 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214013051365 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214013051365 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214013051365 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:30:53.236576 run patchelf(pid=24235): Terminating (SIGINT) 01:30:53.407518 run patchelf(pid=24235): Terminated: ok {rc=0} 01:30:53.438679 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=24231): Process ended prematurely: osmo-stp_10.42.42.5(pid=24231) [trial-2397↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24231)] [trial-2397↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 01:30:53.447825 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 01:30:53.507163 run osmo-hlr_10.42.42.2(pid=24228): ERR: Terminated: ERROR {rc=237} [trial-2397↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24228)] 01:30:53.555528 run osmo-hlr_10.42.42.2(pid=24228): stdout: | (launched: 2022-12-14_01:30:50.154685) 01:30:53.604439 run osmo-hlr_10.42.42.2(pid=24228): stderr: | �[0;m�[1;31m20221214013050353 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214013050353 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214013050353 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214013050353 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214013050353 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214013050353 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214013050365 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2397/run.2022-12-14_00-40-22/gprs:trx-lms+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214013050373 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214013050374 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214013050374 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:30:53.645981 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24221): Terminating (SIGTERM) 01:30:53.685079 run iperf3-srv_10.42.42.10(pid=24222): Terminating (SIGTERM) 01:30:53.724348 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24223): Terminating (SIGTERM) 01:30:53.763401 run iperf3-srv_10.42.42.10(pid=24224): Terminating (SIGTERM) 01:30:53.802614 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24227): Terminating (SIGTERM) 01:30:53.841643 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24230): Terminating (SIGTERM) 01:30:53.881253 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24233): Terminating (SIGTERM) 01:30:53.890410 --- ParallelTerminationStrategy: PID 24221 died... 01:30:53.942889 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24221): Terminated: ok {rc=0} 01:30:53.952347 --- ParallelTerminationStrategy: PID 24222 died... 01:30:54.004441 run iperf3-srv_10.42.42.10(pid=24222): Terminated {rc=256} 01:30:54.013910 --- ParallelTerminationStrategy: PID 24223 died... 01:30:54.066007 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24223): Terminated: ok {rc=0} 01:30:54.075445 --- ParallelTerminationStrategy: PID 24224 died... 01:30:54.127624 run iperf3-srv_10.42.42.10(pid=24224): Terminated {rc=256} 01:30:54.137186 --- ParallelTerminationStrategy: PID 24227 died... 01:30:54.189365 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24227): Terminated: ok {rc=0} 01:30:54.198795 --- ParallelTerminationStrategy: PID 24230 died... 01:30:54.250958 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24230): Terminated: ok {rc=0} 01:30:54.260378 --- ParallelTerminationStrategy: PID 24233 died... 01:30:54.312492 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24233): Terminated: ok {rc=0} 01:30:54.400100 bus /gobi_0: Setting Powered False 01:30:55.503321 bus /gobi_0: Setting Powered False 01:30:56.610314 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24231): Process ended prematurely: osmo-stp_10.42.42.5(pid=24231) [trial-2397↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24231)]