Failed
dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo.switch_tch_pdch.py (from dynts_trx-sysmocell5000+mod-bts0-dynts67-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=7118): Process ended prematurely: osmo-stp_10.42.42.5(pid=7118) [trial-2399↪dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7118)]
Standard Output
---------------------------------------------- trial-2399 dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo switch_tch_pdch.py ---------------------------------------------- 04:10:21.668090 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 04:10:21.679853 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1) 04:10:21.845058 tst switch_tch_pdch.py: using LAC 38450 04:10:21.969064 tst switch_tch_pdch.py: using RAC 200 04:10:22.088538 tst switch_tch_pdch.py: using CellId 38450 04:10:22.207197 tst switch_tch_pdch.py: using BVCI 38451 04:10:22.229939 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 04:10:22.241088 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 04:10:22.251977 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 04:10:22.263060 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 04:10:22.274484 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 04:10:22.285831 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 04:10:22.297309 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 04:10:22.308699 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 04:10:22.428843 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 04:10:22.703038 tst switch_tch_pdch.py:51: start network... 04:10:22.825721 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:10:23.276129 run create_hlr_db(pid=7112): Launched 04:10:23.397372 bus /gobi_6: Setting Powered False 04:10:24.468277 run create_hlr_db(pid=7112): Terminated: ok {rc=0} 04:10:24.865659 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7114): Launched 04:10:25.187151 run osmo-hlr_10.42.42.2(pid=7115): Launched 04:10:25.302978 run osmo-stp_10.42.42.5: Starting osmo-stp 04:10:25.829942 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7117): Launched 04:10:26.148027 run osmo-stp_10.42.42.5(pid=7118): Launched 04:10:26.263361 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:10:26.792336 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7120): Launched 04:10:26.905531 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:10:27.184005 run patchelf(pid=7121): Launched 04:10:27.370345 run osmo-stp_10.42.42.5(pid=7118): ERR: Terminated: ERROR {rc=1} [trial-2399↪dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7118)] 04:10:27.507211 run osmo-stp_10.42.42.5(pid=7118): stdout: | (launched: 2022-12-14_04:10:25.990796) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:10:27.644232 run osmo-stp_10.42.42.5(pid=7118): stderr: | �[0;m�[38;5;43m20221214041026181 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214041026181 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214041026182 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214041026182 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214041026182 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214041026183 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214041026183 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:10:27.776383 run osmo-stp_10.42.42.5(pid=7118): stdout: | (launched: 2022-12-14_04:10:25.990796) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:10:27.906993 run osmo-stp_10.42.42.5(pid=7118): stderr: | �[0;m�[38;5;43m20221214041026181 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214041026181 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214041026182 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214041026182 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214041026182 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214041026183 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214041026183 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:10:28.058815 run patchelf(pid=7121): Terminating (SIGINT) 04:10:28.236940 run patchelf(pid=7121): Terminated: ok {rc=0} 04:10:28.269396 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=7118): Process ended prematurely: osmo-stp_10.42.42.5(pid=7118) [trial-2399↪dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7118)] [trial-2399↪dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54] 04:10:28.278759 tst switch_tch_pdch.py:54: Test FAILED (6.6 sec) 04:10:28.342342 run osmo-hlr_10.42.42.2(pid=7115): ERR: Terminated: ERROR {rc=237} [trial-2399↪dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7115)] 04:10:28.394184 run osmo-hlr_10.42.42.2(pid=7115): stdout: | (launched: 2022-12-14_04:10:25.028317) 04:10:28.446765 run osmo-hlr_10.42.42.2(pid=7115): stderr: | �[0;m�[1;31m20221214041025224 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214041025224 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214041025224 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214041025224 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214041025224 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214041025224 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214041025236 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214041025244 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214041025244 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214041025244 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:10:28.491623 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7114): Terminating (SIGTERM) 04:10:28.533777 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7117): Terminating (SIGTERM) 04:10:28.576206 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7120): Terminating (SIGTERM) 04:10:28.585927 --- ParallelTerminationStrategy: PID 7114 died... 04:10:28.642670 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7114): Terminated: ok {rc=0} 04:10:28.652881 --- ParallelTerminationStrategy: PID 7117 died... 04:10:28.709310 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7117): Terminated: ok {rc=0} 04:10:28.719435 --- ParallelTerminationStrategy: PID 7120 died... 04:10:28.776023 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7120): Terminated: ok {rc=0} 04:10:28.862775 bus /gobi_0: Setting Powered False 04:10:29.968903 bus /gobi_0: Setting Powered False 04:10:31.098402 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7118): Process ended prematurely: osmo-stp_10.42.42.5(pid=7118) [trial-2399↪dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7118)]