Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3m4.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=10284): Process ended prematurely: osmo-stp_10.42.42.5(pid=10284) [trial-2399↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10284)]
Standard Output
---------------------------------------------- trial-2399 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3m4.py ---------------------------------------------- 04:47:52.250015 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:52.263034 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 04:47:52.411143 tst iperf3m4.py: using LAC 38650 04:47:52.543179 tst iperf3m4.py: using RAC 145 04:47:52.668389 tst iperf3m4.py: using CellId 38650 04:47:52.794477 tst iperf3m4.py: using BVCI 38651 04:47:52.819357 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:52.831320 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:52.843083 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:52.854839 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:52.867294 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:52.879738 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:52.892295 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:52.904702 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:52.917497 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 04:47:53.042501 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 04:47:53.166613 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 04:47:53.282121 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 04:47:53.576269 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003... 04:47:53.711423 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:47:54.045041 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10270): Launched 04:47:54.325607 run iperf3-srv_10.42.42.10(pid=10271): Launched 04:47:54.524328 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004... 04:47:54.659830 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:47:54.995709 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10272): Launched 04:47:55.274675 run iperf3-srv_10.42.42.10(pid=10273): Launched 04:47:55.472786 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005... 04:47:55.607716 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:47:55.942447 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10274): Launched 04:47:56.221410 run iperf3-srv_10.42.42.10(pid=10275): Launched 04:47:56.419582 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006... 04:47:56.554519 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:47:56.888628 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10276): Launched 04:47:57.169373 run iperf3-srv_10.42.42.10(pid=10277): Launched 04:47:57.368416 tst iperf3m4.py:8: start network... 04:47:57.504025 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:47:58.017129 run create_hlr_db(pid=10278): Launched 04:47:58.203776 bus /gobi_6: Setting Powered False 04:47:59.225634 run create_hlr_db(pid=10278): Terminated: ok {rc=0} 04:47:59.656228 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10280): Launched 04:47:59.980235 run osmo-hlr_10.42.42.2(pid=10281): Launched 04:48:00.099767 run osmo-stp_10.42.42.5: Starting osmo-stp 04:48:00.664840 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10283): Launched 04:48:01.074083 run osmo-stp_10.42.42.5(pid=10284): Launched 04:48:01.338801 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:48:01.929043 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10286): Launched 04:48:02.047990 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:48:02.336695 run patchelf(pid=10287): Launched 04:48:02.515660 run osmo-stp_10.42.42.5(pid=10284): ERR: Terminated: ERROR {rc=1} [trial-2399↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10284)] 04:48:02.646335 run osmo-stp_10.42.42.5(pid=10284): stdout: | (launched: 2022-12-14_04:48:00.831527) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:48:02.777085 run osmo-stp_10.42.42.5(pid=10284): stderr: | �[0;m�[38;5;43m20221214044801159 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214044801161 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214044801161 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214044801163 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214044801165 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214044801165 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214044801165 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:48:02.903886 run osmo-stp_10.42.42.5(pid=10284): stdout: | (launched: 2022-12-14_04:48:00.831527) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:48:03.029055 run osmo-stp_10.42.42.5(pid=10284): stderr: | �[0;m�[38;5;43m20221214044801159 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214044801161 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214044801161 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214044801163 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214044801165 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214044801165 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214044801165 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:48:03.174731 run patchelf(pid=10287): Terminating (SIGINT) 04:48:03.345649 run patchelf(pid=10287): Terminated: ok {rc=0} 04:48:03.377238 tst iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=10284): Process ended prematurely: osmo-stp_10.42.42.5(pid=10284) [trial-2399↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10284)] [trial-2399↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8] 04:48:03.386766 tst iperf3m4.py:8: Test FAILED (11.2 sec) 04:48:03.447888 run osmo-hlr_10.42.42.2(pid=10281): ERR: Terminated: ERROR {rc=237} [trial-2399↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10281)] 04:48:03.497363 run osmo-hlr_10.42.42.2(pid=10281): stdout: | (launched: 2022-12-14_04:47:59.820489) 04:48:03.547614 run osmo-hlr_10.42.42.2(pid=10281): stderr: | �[0;m�[1;31m20221214044800013 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214044800013 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214044800014 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214044800014 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214044800014 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214044800014 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214044800026 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214044800034 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214044800034 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214044800034 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:48:03.590257 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10270): Terminating (SIGTERM) 04:48:03.629857 run iperf3-srv_10.42.42.10(pid=10271): Terminating (SIGTERM) 04:48:03.669921 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10272): Terminating (SIGTERM) 04:48:03.709660 run iperf3-srv_10.42.42.10(pid=10273): Terminating (SIGTERM) 04:48:03.749613 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10274): Terminating (SIGTERM) 04:48:03.789577 run iperf3-srv_10.42.42.10(pid=10275): Terminating (SIGTERM) 04:48:03.829630 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10276): Terminating (SIGTERM) 04:48:03.869601 run iperf3-srv_10.42.42.10(pid=10277): Terminating (SIGTERM) 04:48:03.909571 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10280): Terminating (SIGTERM) 04:48:03.949649 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10283): Terminating (SIGTERM) 04:48:03.989937 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10286): Terminating (SIGTERM) 04:48:03.998783 --- ParallelTerminationStrategy: PID 10270 died... 04:48:04.053114 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10270): Terminated: ok {rc=0} 04:48:04.062654 --- ParallelTerminationStrategy: PID 10271 died... 04:48:04.116332 run iperf3-srv_10.42.42.10(pid=10271): Terminated {rc=256} 04:48:04.126032 --- ParallelTerminationStrategy: PID 10272 died... 04:48:04.179732 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10272): Terminated: ok {rc=0} 04:48:04.189441 --- ParallelTerminationStrategy: PID 10273 died... 04:48:04.243016 run iperf3-srv_10.42.42.10(pid=10273): Terminated {rc=256} 04:48:04.252482 --- ParallelTerminationStrategy: PID 10274 died... 04:48:04.306168 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10274): Terminated: ok {rc=0} 04:48:04.315830 --- ParallelTerminationStrategy: PID 10275 died... 04:48:04.369640 run iperf3-srv_10.42.42.10(pid=10275): Terminated {rc=256} 04:48:04.379362 --- ParallelTerminationStrategy: PID 10276 died... 04:48:04.433027 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10276): Terminated: ok {rc=0} 04:48:04.442768 --- ParallelTerminationStrategy: PID 10277 died... 04:48:04.496409 run iperf3-srv_10.42.42.10(pid=10277): Terminated {rc=256} 04:48:04.505995 --- ParallelTerminationStrategy: PID 10280 died... 04:48:04.559166 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10280): Terminated: ok {rc=0} 04:48:04.568870 --- ParallelTerminationStrategy: PID 10283 died... 04:48:04.622317 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10283): Terminated: ok {rc=0} 04:48:04.632029 --- ParallelTerminationStrategy: PID 10286 died... 04:48:04.685530 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10286): Terminated: ok {rc=0} 04:48:04.773563 bus /gobi_4: Setting Powered False 04:48:05.875972 bus /gobi_4: Setting Powered False 04:48:06.986133 bus /gobi_1: Setting Powered False 04:48:08.088850 bus /gobi_1: Setting Powered False 04:48:09.199942 bus /gobi_0: Setting Powered False 04:48:10.302078 bus /gobi_0: Setting Powered False 04:48:11.409028 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3m4.py", line 8, in <module> setup_run_iperf3_test_parallel(4) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10284): Process ended prematurely: osmo-stp_10.42.42.5(pid=10284) [trial-2399↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10284)]