Failed
gprs:trx-lms+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=8501): Process ended prematurely: osmo-stp_10.42.42.5(pid=8501) [trial-2399↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8501)]
Standard Output
---------------------------------------------- trial-2399 gprs:trx-lms+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 04:26:16.567030 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:26:16.579534 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 04:26:16.772103 tst cs_paging_gprs_active.py: using LAC 38535 04:26:16.908503 tst cs_paging_gprs_active.py: using RAC 30 04:26:17.068639 tst cs_paging_gprs_active.py: using CellId 38535 04:26:17.214732 tst cs_paging_gprs_active.py: using BVCI 38536 04:26:17.239503 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:26:17.251697 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:26:17.263904 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:26:17.276035 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:26:17.289449 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:26:17.302945 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:26:17.314345 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:26:17.325530 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 04:26:17.336548 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 04:26:17.458176 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 04:26:17.758529 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 04:26:17.893778 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:26:18.230162 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8491): Launched 04:26:18.510494 run iperf3-srv_10.42.42.10(pid=8492): Launched 04:26:18.710149 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 04:26:18.845191 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:26:19.181267 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8493): Launched 04:26:19.461329 run iperf3-srv_10.42.42.10(pid=8494): Launched 04:26:19.660807 tst cs_paging_gprs_active.py:38: start network... 04:26:19.796117 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:26:20.306979 run create_hlr_db(pid=8495): Launched 04:26:20.494063 bus /gobi_6: Setting Powered False 04:26:21.515249 run create_hlr_db(pid=8495): Terminated: ok {rc=0} 04:26:21.946675 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8497): Launched 04:26:22.272713 run osmo-hlr_10.42.42.2(pid=8498): Launched 04:26:22.389832 run osmo-stp_10.42.42.5: Starting osmo-stp 04:26:22.956610 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8500): Launched 04:26:23.283331 run osmo-stp_10.42.42.5(pid=8501): Launched 04:26:23.400938 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:26:23.969452 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8503): Launched 04:26:24.085368 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:26:24.369596 run patchelf(pid=8504): Launched 04:26:24.561194 run osmo-stp_10.42.42.5(pid=8501): ERR: Terminated: ERROR {rc=1} [trial-2399↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8501)] 04:26:24.700283 run osmo-stp_10.42.42.5(pid=8501): stdout: | (launched: 2022-12-14_04:26:23.122014) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:26:24.839399 run osmo-stp_10.42.42.5(pid=8501): stderr: | �[0;m�[38;5;43m20221214042623311 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214042623311 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214042623311 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214042623312 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214042623312 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214042623312 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214042623313 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:26:24.973974 run osmo-stp_10.42.42.5(pid=8501): stdout: | (launched: 2022-12-14_04:26:23.122014) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:26:25.107257 run osmo-stp_10.42.42.5(pid=8501): stderr: | �[0;m�[38;5;43m20221214042623311 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214042623311 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214042623311 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214042623312 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214042623312 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214042623312 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214042623313 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:26:25.262305 run patchelf(pid=8504): Terminating (SIGINT) 04:26:25.444189 run patchelf(pid=8504): Terminated: ok {rc=0} 04:26:25.477812 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8501): Process ended prematurely: osmo-stp_10.42.42.5(pid=8501) [trial-2399↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8501)] [trial-2399↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 04:26:25.487713 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 04:26:25.550954 run osmo-hlr_10.42.42.2(pid=8498): ERR: Terminated: ERROR {rc=237} [trial-2399↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8498)] 04:26:25.602658 run osmo-hlr_10.42.42.2(pid=8498): stdout: | (launched: 2022-12-14_04:26:22.111243) 04:26:25.655294 run osmo-hlr_10.42.42.2(pid=8498): stderr: | �[0;m�[1;31m20221214042622307 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214042622307 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214042622307 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214042622307 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214042622307 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214042622307 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214042622318 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:trx-lms+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214042622327 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214042622327 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214042622327 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:26:25.700006 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8491): Terminating (SIGTERM) 04:26:25.741751 run iperf3-srv_10.42.42.10(pid=8492): Terminating (SIGTERM) 04:26:25.784056 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8493): Terminating (SIGTERM) 04:26:25.825808 run iperf3-srv_10.42.42.10(pid=8494): Terminating (SIGTERM) 04:26:25.867330 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8497): Terminating (SIGTERM) 04:26:25.909695 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8500): Terminating (SIGTERM) 04:26:25.951466 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8503): Terminating (SIGTERM) 04:26:25.961118 --- ParallelTerminationStrategy: PID 8491 died... 04:26:26.017027 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8491): Terminated: ok {rc=0} 04:26:26.027039 --- ParallelTerminationStrategy: PID 8492 died... 04:26:26.082751 run iperf3-srv_10.42.42.10(pid=8492): Terminated {rc=256} 04:26:26.092668 --- ParallelTerminationStrategy: PID 8493 died... 04:26:26.148355 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8493): Terminated: ok {rc=0} 04:26:26.158336 --- ParallelTerminationStrategy: PID 8494 died... 04:26:26.214046 run iperf3-srv_10.42.42.10(pid=8494): Terminated {rc=256} 04:26:26.224031 --- ParallelTerminationStrategy: PID 8497 died... 04:26:26.279702 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8497): Terminated: ok {rc=0} 04:26:26.289889 --- ParallelTerminationStrategy: PID 8500 died... 04:26:26.345847 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8500): Terminated: ok {rc=0} 04:26:26.355890 --- ParallelTerminationStrategy: PID 8503 died... 04:26:26.411852 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8503): Terminated: ok {rc=0} 04:26:26.498293 bus /gobi_0: Setting Powered False 04:26:27.601334 bus /gobi_0: Setting Powered False 04:26:28.712402 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8501): Process ended prematurely: osmo-stp_10.42.42.5(pid=8501) [trial-2399↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8501)]