Failed
gprs:trx-umtrx+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=7543): Process ended prematurely: osmo-stp_10.42.42.5(pid=7543) [trial-2399↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7543)]
Standard Output
---------------------------------------------- trial-2399 gprs:trx-umtrx+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 04:16:22.955667 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:16:22.967023 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 04:16:23.131707 tst cs_paging_gprs_active.py: using LAC 38483 04:16:23.259232 tst cs_paging_gprs_active.py: using RAC 233 04:16:23.381830 tst cs_paging_gprs_active.py: using CellId 38483 04:16:23.501177 tst cs_paging_gprs_active.py: using BVCI 38484 04:16:23.524401 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:16:23.535222 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:16:23.545844 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:16:23.556429 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:16:23.567548 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:16:23.578780 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:16:23.591557 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:16:23.604024 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:16:23.615588 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 04:16:23.734122 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 04:16:24.032294 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 04:16:24.168444 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:16:24.506992 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7533): Launched 04:16:24.788879 run iperf3-srv_10.42.42.10(pid=7534): Launched 04:16:24.988616 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 04:16:25.124279 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:16:25.462123 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7535): Launched 04:16:25.742794 run iperf3-srv_10.42.42.10(pid=7536): Launched 04:16:25.942784 tst cs_paging_gprs_active.py:38: start network... 04:16:26.078703 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:16:26.594154 run create_hlr_db(pid=7537): Launched 04:16:26.782600 bus /gobi_6: Setting Powered False 04:16:27.793485 run create_hlr_db(pid=7537): Terminated: ok {rc=0} 04:16:28.235262 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7539): Launched 04:16:28.565541 run osmo-hlr_10.42.42.2(pid=7540): Launched 04:16:28.686259 run osmo-stp_10.42.42.5: Starting osmo-stp 04:16:29.255571 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7542): Launched 04:16:29.582306 run osmo-stp_10.42.42.5(pid=7543): Launched 04:16:29.699873 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:16:30.270518 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7545): Launched 04:16:30.387526 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:16:30.680765 run patchelf(pid=7546): Launched 04:16:30.895289 run osmo-stp_10.42.42.5(pid=7543): ERR: Terminated: ERROR {rc=1} [trial-2399↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7543)] 04:16:31.029988 run osmo-stp_10.42.42.5(pid=7543): stdout: | (launched: 2022-12-14_04:16:29.421540) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:16:31.167644 run osmo-stp_10.42.42.5(pid=7543): stderr: | �[0;m�[38;5;43m20221214041629616 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214041629616 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214041629616 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214041629617 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214041629617 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214041629617 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214041629617 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:16:31.299388 run osmo-stp_10.42.42.5(pid=7543): stdout: | (launched: 2022-12-14_04:16:29.421540) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:16:31.429466 run osmo-stp_10.42.42.5(pid=7543): stderr: | �[0;m�[38;5;43m20221214041629616 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214041629616 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214041629616 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214041629617 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214041629617 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214041629617 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214041629617 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:16:31.581719 run patchelf(pid=7546): Terminating (SIGINT) 04:16:31.760812 run patchelf(pid=7546): Terminated: ok {rc=0} 04:16:31.793748 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7543): Process ended prematurely: osmo-stp_10.42.42.5(pid=7543) [trial-2399↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7543)] [trial-2399↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 04:16:31.804097 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 04:16:31.867515 run osmo-hlr_10.42.42.2(pid=7540): ERR: Terminated: ERROR {rc=237} [trial-2399↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7540)] 04:16:31.919558 run osmo-hlr_10.42.42.2(pid=7540): stdout: | (launched: 2022-12-14_04:16:28.401727) 04:16:31.971271 run osmo-hlr_10.42.42.2(pid=7540): stderr: | �[0;m�[1;31m20221214041628601 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214041628601 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214041628601 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214041628601 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214041628601 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214041628602 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214041628614 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:trx-umtrx+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214041628622 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214041628622 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214041628622 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:16:32.014946 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7533): Terminating (SIGTERM) 04:16:32.059175 run iperf3-srv_10.42.42.10(pid=7534): Terminating (SIGTERM) 04:16:32.104332 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7535): Terminating (SIGTERM) 04:16:32.146990 run iperf3-srv_10.42.42.10(pid=7536): Terminating (SIGTERM) 04:16:32.190142 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7539): Terminating (SIGTERM) 04:16:32.231458 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7542): Terminating (SIGTERM) 04:16:32.271498 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7545): Terminating (SIGTERM) 04:16:32.280433 --- ParallelTerminationStrategy: PID 7533 died... 04:16:32.334430 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7533): Terminated: ok {rc=0} 04:16:32.344156 --- ParallelTerminationStrategy: PID 7534 died... 04:16:32.397387 run iperf3-srv_10.42.42.10(pid=7534): Terminated {rc=256} 04:16:32.407047 --- ParallelTerminationStrategy: PID 7535 died... 04:16:32.460529 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7535): Terminated: ok {rc=0} 04:16:32.470252 --- ParallelTerminationStrategy: PID 7536 died... 04:16:32.523531 run iperf3-srv_10.42.42.10(pid=7536): Terminated {rc=256} 04:16:32.533299 --- ParallelTerminationStrategy: PID 7539 died... 04:16:32.586754 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7539): Terminated: ok {rc=0} 04:16:32.596417 --- ParallelTerminationStrategy: PID 7542 died... 04:16:32.649927 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7542): Terminated: ok {rc=0} 04:16:32.659632 --- ParallelTerminationStrategy: PID 7545 died... 04:16:32.713018 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7545): Terminated: ok {rc=0} 04:16:32.801360 bus /gobi_0: Setting Powered False 04:16:33.906417 bus /gobi_0: Setting Powered False 04:16:35.017985 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7543): Process ended prematurely: osmo-stp_10.42.42.5(pid=7543) [trial-2399↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7543)]