Failed
gprs:nanobts+band-1900.ping_idle_ping.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=26145): Process ended prematurely: osmo-stp_10.42.42.5(pid=26145) [trial-2401↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26145)]
Standard Output
---------------------------------------------- trial-2401 gprs:nanobts+band-1900 ping_idle_ping.py ---------------------------------------------- 08:01:51.702943 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 08:01:51.715394 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 08:01:51.854220 tst ping_idle_ping.py: using LAC 39526 08:01:51.983351 tst ping_idle_ping.py: using RAC 1 08:01:52.111381 tst ping_idle_ping.py: using CellId 39526 08:01:52.241066 tst ping_idle_ping.py: using BVCI 39527 08:01:52.265964 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 08:01:52.277299 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 08:01:52.288527 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 08:01:52.299612 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 08:01:52.311536 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 08:01:52.323745 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 08:01:52.335905 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 08:01:52.348161 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 08:01:52.636045 tst ping_idle_ping.py:24: start network... 08:01:52.762172 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:01:53.256640 run create_hlr_db(pid=26139): Launched 08:01:53.433878 bus /gobi_6: Setting Powered False 08:01:54.454392 run create_hlr_db(pid=26139): Terminated: ok {rc=0} 08:01:54.864291 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26141): Launched 08:01:55.172080 run osmo-hlr_10.42.42.2(pid=26142): Launched 08:01:55.282797 run osmo-stp_10.42.42.5: Starting osmo-stp 08:01:55.811923 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26144): Launched 08:01:56.119509 run osmo-stp_10.42.42.5(pid=26145): Launched 08:01:56.230500 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:01:56.763869 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26148): Launched 08:01:56.871871 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:01:57.140359 run patchelf(pid=26149): Launched 08:01:57.318953 run osmo-stp_10.42.42.5(pid=26145): ERR: Terminated: ERROR {rc=1} [trial-2401↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26145)] 08:01:57.448824 run osmo-stp_10.42.42.5(pid=26145): stdout: | (launched: 2022-12-14_08:01:55.966645) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:01:57.578921 run osmo-stp_10.42.42.5(pid=26145): stderr: | �[0;m�[38;5;43m20221214080156139 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214080156139 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214080156139 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214080156140 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214080156140 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214080156140 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214080156141 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:01:57.703868 run osmo-stp_10.42.42.5(pid=26145): stdout: | (launched: 2022-12-14_08:01:55.966645) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:01:57.827550 run osmo-stp_10.42.42.5(pid=26145): stderr: | �[0;m�[38;5;43m20221214080156139 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214080156139 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214080156139 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214080156140 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214080156140 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214080156140 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214080156141 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:01:57.972828 run patchelf(pid=26149): Terminating (SIGINT) 08:01:58.144666 run patchelf(pid=26149): Terminated: ok {rc=0} 08:01:58.175714 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=26145): Process ended prematurely: osmo-stp_10.42.42.5(pid=26145) [trial-2401↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26145)] [trial-2401↪gprs:nanobts+band-1900↪ping_idle_ping.py:27] 08:01:58.184345 tst ping_idle_ping.py:27: Test FAILED (6.5 sec) 08:01:58.244268 run osmo-hlr_10.42.42.2(pid=26142): ERR: Terminated: ERROR {rc=237} [trial-2401↪gprs:nanobts+band-1900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26142)] 08:01:58.292912 run osmo-hlr_10.42.42.2(pid=26142): stdout: | (launched: 2022-12-14_08:01:55.019012) 08:01:58.342189 run osmo-hlr_10.42.42.2(pid=26142): stderr: | �[0;m�[1;31m20221214080155197 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214080155197 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214080155197 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214080155197 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214080155197 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214080155197 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214080155210 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/gprs:nanobts+band-1900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214080155218 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214080155219 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214080155219 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:01:58.384476 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26141): Terminating (SIGTERM) 08:01:58.424195 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26144): Terminating (SIGTERM) 08:01:58.464102 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26148): Terminating (SIGTERM) 08:01:58.473539 --- ParallelTerminationStrategy: PID 26141 died... 08:01:58.526647 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26141): Terminated: ok {rc=0} 08:01:58.536339 --- ParallelTerminationStrategy: PID 26144 died... 08:01:58.588918 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26144): Terminated: ok {rc=0} 08:01:58.598579 --- ParallelTerminationStrategy: PID 26148 died... 08:01:58.651016 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26148): Terminated: ok {rc=0} 08:01:58.738853 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26145): Process ended prematurely: osmo-stp_10.42.42.5(pid=26145) [trial-2401↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26145)]