Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=27031): Process ended prematurely: osmo-stp_10.42.42.5(pid=27031) [trial-2401↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27031)]
Standard Output
---------------------------------------------- trial-2401 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 08:10:15.373875 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:10:15.385732 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 08:10:15.522923 tst cs_paging_gprs_active.py: using LAC 39570 08:10:15.641225 tst cs_paging_gprs_active.py: using RAC 45 08:10:15.760778 tst cs_paging_gprs_active.py: using CellId 39570 08:10:15.884795 tst cs_paging_gprs_active.py: using BVCI 39571 08:10:15.909041 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:10:15.921090 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:10:15.933088 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:10:15.944706 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:10:15.956385 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:10:15.967957 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:10:15.980027 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:10:15.991912 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:10:16.004328 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 08:10:16.128570 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 08:10:16.500909 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:10:16.634769 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:10:16.972343 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27021): Launched 08:10:17.274467 run iperf3-srv_10.42.42.10(pid=27022): Launched 08:10:17.477034 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:10:17.614672 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:10:17.955086 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27023): Launched 08:10:18.236771 run iperf3-srv_10.42.42.10(pid=27024): Launched 08:10:18.437330 tst cs_paging_gprs_active.py:38: start network... 08:10:18.574020 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:10:19.093320 run create_hlr_db(pid=27025): Launched 08:10:19.283749 bus /gobi_6: Setting Powered False 08:10:20.303999 run create_hlr_db(pid=27025): Terminated: ok {rc=0} 08:10:20.719652 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27027): Launched 08:10:21.027991 run osmo-hlr_10.42.42.2(pid=27028): Launched 08:10:21.140196 run osmo-stp_10.42.42.5: Starting osmo-stp 08:10:21.670930 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27030): Launched 08:10:21.977289 run osmo-stp_10.42.42.5(pid=27031): Launched 08:10:22.087952 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:10:22.623140 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27033): Launched 08:10:22.731648 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:10:23.000018 run patchelf(pid=27034): Launched 08:10:23.179771 run osmo-stp_10.42.42.5(pid=27031): ERR: Terminated: ERROR {rc=1} [trial-2401↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27031)] 08:10:23.310561 run osmo-stp_10.42.42.5(pid=27031): stdout: | (launched: 2022-12-14_08:10:21.826151) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:10:23.440461 run osmo-stp_10.42.42.5(pid=27031): stderr: | �[0;m�[38;5;43m20221214081021995 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214081021995 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214081021996 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214081021996 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214081021996 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214081021997 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214081021997 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:10:23.566677 run osmo-stp_10.42.42.5(pid=27031): stdout: | (launched: 2022-12-14_08:10:21.826151) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:10:23.691754 run osmo-stp_10.42.42.5(pid=27031): stderr: | �[0;m�[38;5;43m20221214081021995 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214081021995 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214081021996 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214081021996 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214081021996 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214081021997 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214081021997 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:10:23.838709 run patchelf(pid=27034): Terminating (SIGINT) 08:10:24.011764 run patchelf(pid=27034): Terminated: ok {rc=0} 08:10:24.043797 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=27031): Process ended prematurely: osmo-stp_10.42.42.5(pid=27031) [trial-2401↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27031)] [trial-2401↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 08:10:24.053274 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 08:10:24.112921 run osmo-hlr_10.42.42.2(pid=27028): ERR: Terminated: ERROR {rc=237} [trial-2401↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27028)] 08:10:24.161706 run osmo-hlr_10.42.42.2(pid=27028): stdout: | (launched: 2022-12-14_08:10:20.876340) 08:10:24.211189 run osmo-hlr_10.42.42.2(pid=27028): stderr: | �[0;m�[1;31m20221214081021051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214081021051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214081021051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214081021051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214081021051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214081021051 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214081021063 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214081021073 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214081021073 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214081021073 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:10:24.253441 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27021): Terminating (SIGTERM) 08:10:24.293405 run iperf3-srv_10.42.42.10(pid=27022): Terminating (SIGTERM) 08:10:24.333312 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27023): Terminating (SIGTERM) 08:10:24.372991 run iperf3-srv_10.42.42.10(pid=27024): Terminating (SIGTERM) 08:10:24.412681 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27027): Terminating (SIGTERM) 08:10:24.452612 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27030): Terminating (SIGTERM) 08:10:24.492300 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27033): Terminating (SIGTERM) 08:10:24.501458 --- ParallelTerminationStrategy: PID 27021 died... 08:10:24.554658 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27021): Terminated: ok {rc=0} 08:10:24.564134 --- ParallelTerminationStrategy: PID 27022 died... 08:10:24.616597 run iperf3-srv_10.42.42.10(pid=27022): Terminated {rc=256} 08:10:24.625962 --- ParallelTerminationStrategy: PID 27023 died... 08:10:24.678500 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27023): Terminated: ok {rc=0} 08:10:24.687875 --- ParallelTerminationStrategy: PID 27024 died... 08:10:24.740241 run iperf3-srv_10.42.42.10(pid=27024): Terminated {rc=256} 08:10:24.749712 --- ParallelTerminationStrategy: PID 27027 died... 08:10:24.802367 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27027): Terminated: ok {rc=0} 08:10:24.811838 --- ParallelTerminationStrategy: PID 27030 died... 08:10:24.864237 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27030): Terminated: ok {rc=0} 08:10:24.873693 --- ParallelTerminationStrategy: PID 27033 died... 08:10:24.926172 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27033): Terminated: ok {rc=0} 08:10:25.014864 bus /gobi_0: Setting Powered False 08:10:26.118945 bus /gobi_0: Setting Powered False 08:10:27.230303 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27031): Process ended prematurely: osmo-stp_10.42.42.5(pid=27031) [trial-2401↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27031)]