Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3m4.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=27061): Process ended prematurely: osmo-stp_10.42.42.5(pid=27061) [trial-2401↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27061)]
Standard Output
---------------------------------------------- trial-2401 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3m4.py ---------------------------------------------- 08:10:38.058257 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:10:38.071064 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 08:10:38.223938 tst iperf3m4.py: using LAC 39572 08:10:38.349845 tst iperf3m4.py: using RAC 47 08:10:38.471723 tst iperf3m4.py: using CellId 39572 08:10:38.589487 tst iperf3m4.py: using BVCI 39573 08:10:38.612869 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:10:38.624519 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:10:38.636157 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:10:38.647623 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:10:38.659242 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:10:38.670672 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:10:38.682082 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:10:38.693323 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:10:38.704675 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 08:10:38.827318 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 08:10:38.949999 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 08:10:39.068500 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 08:10:39.367941 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003... 08:10:39.504905 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:10:39.848163 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27047): Launched 08:10:40.133218 run iperf3-srv_10.42.42.10(pid=27048): Launched 08:10:40.334984 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004... 08:10:40.471867 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:10:40.812496 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27049): Launched 08:10:41.095708 run iperf3-srv_10.42.42.10(pid=27050): Launched 08:10:41.296852 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005... 08:10:41.434021 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:10:41.776771 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27051): Launched 08:10:42.059252 run iperf3-srv_10.42.42.10(pid=27052): Launched 08:10:42.260109 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006... 08:10:42.396744 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:10:42.737433 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27053): Launched 08:10:43.021389 run iperf3-srv_10.42.42.10(pid=27054): Launched 08:10:43.222456 tst iperf3m4.py:8: start network... 08:10:43.359755 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:10:43.875913 run create_hlr_db(pid=27055): Launched 08:10:44.065099 bus /gobi_6: Setting Powered False 08:10:45.086582 run create_hlr_db(pid=27055): Terminated: ok {rc=0} 08:10:45.525230 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27057): Launched 08:10:45.855316 run osmo-hlr_10.42.42.2(pid=27058): Launched 08:10:46.103817 run osmo-stp_10.42.42.5: Starting osmo-stp 08:10:46.692412 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27060): Launched 08:10:47.122715 run osmo-stp_10.42.42.5(pid=27061): Launched 08:10:47.296227 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:10:47.833654 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27063): Launched 08:10:47.942380 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:10:48.211108 run patchelf(pid=27064): Launched 08:10:48.389732 run osmo-stp_10.42.42.5(pid=27061): ERR: Terminated: ERROR {rc=1} [trial-2401↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27061)] 08:10:48.520351 run osmo-stp_10.42.42.5(pid=27061): stdout: | (launched: 2022-12-14_08:10:46.862430) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:10:48.651453 run osmo-stp_10.42.42.5(pid=27061): stderr: | �[0;m�[38;5;43m20221214081047158 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214081047158 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214081047158 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214081047159 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214081047159 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214081047159 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214081047159 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:10:48.781732 run osmo-stp_10.42.42.5(pid=27061): stdout: | (launched: 2022-12-14_08:10:46.862430) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:10:48.929281 run osmo-stp_10.42.42.5(pid=27061): stderr: | �[0;m�[38;5;43m20221214081047158 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214081047158 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214081047158 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214081047159 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214081047159 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214081047159 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214081047159 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:10:49.094542 run patchelf(pid=27064): Terminating (SIGINT) 08:10:49.281543 run patchelf(pid=27064): Terminated: ok {rc=0} 08:10:49.315993 tst iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=27061): Process ended prematurely: osmo-stp_10.42.42.5(pid=27061) [trial-2401↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27061)] [trial-2401↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8] 08:10:49.326419 tst iperf3m4.py:8: Test FAILED (11.3 sec) 08:10:49.390228 run osmo-hlr_10.42.42.2(pid=27058): ERR: Terminated: ERROR {rc=237} [trial-2401↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27058)] 08:10:49.442117 run osmo-hlr_10.42.42.2(pid=27058): stdout: | (launched: 2022-12-14_08:10:45.692289) 08:10:49.494418 run osmo-hlr_10.42.42.2(pid=27058): stderr: | �[0;m�[1;31m20221214081045934 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214081045934 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214081045935 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214081045935 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214081045935 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214081045935 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214081045951 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214081045959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214081045960 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214081045960 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:10:49.539242 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27047): Terminating (SIGTERM) 08:10:49.581883 run iperf3-srv_10.42.42.10(pid=27048): Terminating (SIGTERM) 08:10:49.624216 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27049): Terminating (SIGTERM) 08:10:49.666212 run iperf3-srv_10.42.42.10(pid=27050): Terminating (SIGTERM) 08:10:49.709351 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27051): Terminating (SIGTERM) 08:10:49.751592 run iperf3-srv_10.42.42.10(pid=27052): Terminating (SIGTERM) 08:10:49.793572 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27053): Terminating (SIGTERM) 08:10:49.835813 run iperf3-srv_10.42.42.10(pid=27054): Terminating (SIGTERM) 08:10:49.877873 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27057): Terminating (SIGTERM) 08:10:49.920137 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27060): Terminating (SIGTERM) 08:10:49.962176 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27063): Terminating (SIGTERM) 08:10:49.971446 --- ParallelTerminationStrategy: PID 27047 died... 08:10:50.027758 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27047): Terminated: ok {rc=0} 08:10:50.037793 --- ParallelTerminationStrategy: PID 27048 died... 08:10:50.093827 run iperf3-srv_10.42.42.10(pid=27048): Terminated {rc=256} 08:10:50.103754 --- ParallelTerminationStrategy: PID 27049 died... 08:10:50.159975 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27049): Terminated: ok {rc=0} 08:10:50.169914 --- ParallelTerminationStrategy: PID 27050 died... 08:10:50.225760 run iperf3-srv_10.42.42.10(pid=27050): Terminated {rc=256} 08:10:50.235662 --- ParallelTerminationStrategy: PID 27051 died... 08:10:50.291787 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27051): Terminated: ok {rc=0} 08:10:50.301832 --- ParallelTerminationStrategy: PID 27052 died... 08:10:50.357771 run iperf3-srv_10.42.42.10(pid=27052): Terminated {rc=256} 08:10:50.367739 --- ParallelTerminationStrategy: PID 27053 died... 08:10:50.423783 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27053): Terminated: ok {rc=0} 08:10:50.433812 --- ParallelTerminationStrategy: PID 27054 died... 08:10:50.489803 run iperf3-srv_10.42.42.10(pid=27054): Terminated {rc=256} 08:10:50.499753 --- ParallelTerminationStrategy: PID 27057 died... 08:10:50.555904 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27057): Terminated: ok {rc=0} 08:10:50.565948 --- ParallelTerminationStrategy: PID 27060 died... 08:10:50.622310 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27060): Terminated: ok {rc=0} 08:10:50.632323 --- ParallelTerminationStrategy: PID 27063 died... 08:10:50.688490 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27063): Terminated: ok {rc=0} 08:10:50.775543 bus /gobi_4: Setting Powered False 08:10:51.882482 bus /gobi_4: Setting Powered False 08:10:52.991047 bus /gobi_1: Setting Powered False 08:10:54.097342 bus /gobi_1: Setting Powered False 08:10:55.204620 bus /gobi_0: Setting Powered False 08:10:56.311292 bus /gobi_0: Setting Powered False 08:10:57.420515 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3m4.py", line 8, in <module> setup_run_iperf3_test_parallel(4) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27061): Process ended prematurely: osmo-stp_10.42.42.5(pid=27061) [trial-2401↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27061)]