Failed
gprs:sysmo.cs_paging_gprs_active.py (from gprs_sysmo)
Stacktrace
osmo-stp_10.42.42.5(pid=20432): Process ended prematurely: osmo-stp_10.42.42.5(pid=20432) [trial-2401↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20432)]
Standard Output
---------------------------------------------- trial-2401 gprs:sysmo cs_paging_gprs_active.py ---------------------------------------------- 07:02:54.812364 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 07:02:54.823365 tst gprs:sysmo: Using 1 x bts (candidates: 1) 07:02:54.953655 tst cs_paging_gprs_active.py: using LAC 39216 07:02:55.084725 tst cs_paging_gprs_active.py: using RAC 201 07:02:55.212316 tst cs_paging_gprs_active.py: using CellId 39216 07:02:55.334343 tst cs_paging_gprs_active.py: using BVCI 39217 07:02:55.358137 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 07:02:55.368532 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 07:02:55.379306 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 07:02:55.389961 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 07:02:55.401079 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 07:02:55.412142 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 07:02:55.423300 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 07:02:55.434439 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 07:02:55.445592 tst gprs:sysmo: Using 1 x modem (candidates: 4) 07:02:55.568566 tst gprs:sysmo: Using 1 x modem (candidates: 4) 07:02:55.870386 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:02:56.010039 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:02:56.355767 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20421): Launched 07:02:56.648489 run iperf3-srv_10.42.42.10(pid=20422): Launched 07:02:56.853753 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:02:56.993946 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:02:57.339880 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20423): Launched 07:02:57.626987 run iperf3-srv_10.42.42.10(pid=20424): Launched 07:02:57.830539 tst cs_paging_gprs_active.py:38: start network... 07:02:57.969448 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:02:58.492737 run create_hlr_db(pid=20425): Launched 07:02:58.684651 bus /sierra_2: Setting Powered False 07:02:59.705499 run create_hlr_db(pid=20425): Terminated: ok {rc=0} 07:03:00.148513 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20427): Launched 07:03:00.482817 run osmo-hlr_10.42.42.2(pid=20428): Launched 07:03:00.606197 run osmo-stp_10.42.42.5: Starting osmo-stp 07:03:01.221895 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20430): Launched 07:03:01.697834 run osmo-stp_10.42.42.5(pid=20432): Launched 07:03:01.856499 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:03:03.375125 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20434): Launched 07:03:03.484559 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:03:03.760058 run patchelf(pid=20435): Launched 07:03:03.940268 run osmo-stp_10.42.42.5(pid=20432): ERR: Terminated: ERROR {rc=1} [trial-2401↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20432)] 07:03:04.071394 run osmo-stp_10.42.42.5(pid=20432): stdout: | (launched: 2022-12-14_07:03:01.417867) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:03:04.202831 run osmo-stp_10.42.42.5(pid=20432): stderr: | �[0;m�[38;5;43m20221214070301650 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214070301651 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214070301651 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214070301651 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214070301652 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214070301652 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214070301652 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:03:04.330134 run osmo-stp_10.42.42.5(pid=20432): stdout: | (launched: 2022-12-14_07:03:01.417867) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:03:04.456056 run osmo-stp_10.42.42.5(pid=20432): stderr: | �[0;m�[38;5;43m20221214070301650 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214070301651 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214070301651 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214070301651 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214070301652 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214070301652 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214070301652 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:03:04.604094 run patchelf(pid=20435): Terminating (SIGINT) 07:03:04.778811 run patchelf(pid=20435): Terminated: ok {rc=0} 07:03:04.810649 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=20432): Process ended prematurely: osmo-stp_10.42.42.5(pid=20432) [trial-2401↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20432)] [trial-2401↪gprs:sysmo↪cs_paging_gprs_active.py:38] 07:03:04.819587 tst cs_paging_gprs_active.py:38: Test FAILED (10.0 sec) 07:03:04.879048 run osmo-hlr_10.42.42.2(pid=20428): ERR: Terminated: ERROR {rc=237} [trial-2401↪gprs:sysmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20428)] 07:03:04.927539 run osmo-hlr_10.42.42.2(pid=20428): stdout: | (launched: 2022-12-14_07:03:00.317984) 07:03:04.976680 run osmo-hlr_10.42.42.2(pid=20428): stderr: | �[0;m�[1;31m20221214070300521 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214070300521 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214070300521 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214070300521 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214070300521 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214070300521 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214070300534 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/gprs:sysmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214070300542 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214070300542 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214070300542 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:03:05.018720 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20421): Terminating (SIGTERM) 07:03:05.058228 run iperf3-srv_10.42.42.10(pid=20422): Terminating (SIGTERM) 07:03:05.097801 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20423): Terminating (SIGTERM) 07:03:05.137478 run iperf3-srv_10.42.42.10(pid=20424): Terminating (SIGTERM) 07:03:05.177555 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20427): Terminating (SIGTERM) 07:03:05.217235 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20430): Terminating (SIGTERM) 07:03:05.257580 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20434): Terminating (SIGTERM) 07:03:05.266731 --- ParallelTerminationStrategy: PID 20421 died... 07:03:05.320136 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20421): Terminated: ok {rc=0} 07:03:05.329779 --- ParallelTerminationStrategy: PID 20422 died... 07:03:05.382584 run iperf3-srv_10.42.42.10(pid=20422): Terminated {rc=256} 07:03:05.392069 --- ParallelTerminationStrategy: PID 20423 died... 07:03:05.444901 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20423): Terminated: ok {rc=0} 07:03:05.454576 --- ParallelTerminationStrategy: PID 20424 died... 07:03:05.507519 run iperf3-srv_10.42.42.10(pid=20424): Terminated {rc=256} 07:03:05.517150 --- ParallelTerminationStrategy: PID 20427 died... 07:03:05.570977 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20427): Terminated: ok {rc=0} 07:03:05.580646 --- ParallelTerminationStrategy: PID 20430 died... 07:03:05.633596 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20430): Terminated: ok {rc=0} 07:03:05.643234 --- ParallelTerminationStrategy: PID 20434 died... 07:03:05.696106 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20434): Terminated: ok {rc=0} 07:03:05.784609 bus /gobi_0: Setting Powered False 07:03:06.888051 bus /gobi_0: Setting Powered False 07:03:07.997068 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20432): Process ended prematurely: osmo-stp_10.42.42.5(pid=20432) [trial-2401↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20432)]