Failed
gprs:trx-lms+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=24448): Process ended prematurely: osmo-stp_10.42.42.5(pid=24448) [trial-2401↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24448)]
Standard Output
---------------------------------------------- trial-2401 gprs:trx-lms+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 07:48:49.384619 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:48:49.395917 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 07:48:49.564940 tst cs_paging_gprs_active.py: using LAC 39457 07:48:49.694433 tst cs_paging_gprs_active.py: using RAC 187 07:48:49.818368 tst cs_paging_gprs_active.py: using CellId 39457 07:48:49.941355 tst cs_paging_gprs_active.py: using BVCI 39458 07:48:49.965216 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:48:49.976243 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:48:49.987181 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:48:49.998096 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:48:50.009560 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:48:50.020924 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:48:50.032409 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:48:50.043730 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:48:50.055069 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 07:48:50.178383 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 07:48:50.483273 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:48:50.620565 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:48:50.962150 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24438): Launched 07:48:51.248107 run iperf3-srv_10.42.42.10(pid=24439): Launched 07:48:51.449592 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:48:51.587036 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:48:51.928715 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24440): Launched 07:48:52.211676 run iperf3-srv_10.42.42.10(pid=24441): Launched 07:48:52.412665 tst cs_paging_gprs_active.py:38: start network... 07:48:52.549931 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:48:53.069638 run create_hlr_db(pid=24442): Launched 07:48:53.259021 bus /gobi_6: Setting Powered False 07:48:54.279697 run create_hlr_db(pid=24442): Terminated: ok {rc=0} 07:48:54.689527 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24444): Launched 07:48:54.996885 run osmo-hlr_10.42.42.2(pid=24445): Launched 07:48:55.110150 run osmo-stp_10.42.42.5: Starting osmo-stp 07:48:55.644119 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24447): Launched 07:48:55.950806 run osmo-stp_10.42.42.5(pid=24448): Launched 07:48:56.062674 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:48:56.599381 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24450): Launched 07:48:56.708350 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:48:56.978156 run patchelf(pid=24451): Launched 07:48:57.159809 run osmo-stp_10.42.42.5(pid=24448): ERR: Terminated: ERROR {rc=1} [trial-2401↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24448)] 07:48:57.290246 run osmo-stp_10.42.42.5(pid=24448): stdout: | (launched: 2022-12-14_07:48:55.799293) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:48:57.420678 run osmo-stp_10.42.42.5(pid=24448): stderr: | �[0;m�[38;5;43m20221214074855967 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214074855967 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214074855968 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214074855968 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214074855969 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214074855969 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214074855969 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:48:57.546985 run osmo-stp_10.42.42.5(pid=24448): stdout: | (launched: 2022-12-14_07:48:55.799293) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:48:57.672001 run osmo-stp_10.42.42.5(pid=24448): stderr: | �[0;m�[38;5;43m20221214074855967 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214074855967 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214074855968 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214074855968 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214074855969 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214074855969 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214074855969 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:48:57.819023 run patchelf(pid=24451): Terminating (SIGINT) 07:48:57.992787 run patchelf(pid=24451): Terminated: ok {rc=0} 07:48:58.024426 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=24448): Process ended prematurely: osmo-stp_10.42.42.5(pid=24448) [trial-2401↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24448)] [trial-2401↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 07:48:58.033659 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 07:48:58.093280 run osmo-hlr_10.42.42.2(pid=24445): ERR: Terminated: ERROR {rc=237} [trial-2401↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24445)] 07:48:58.141988 run osmo-hlr_10.42.42.2(pid=24445): stdout: | (launched: 2022-12-14_07:48:54.845124) 07:48:58.191278 run osmo-hlr_10.42.42.2(pid=24445): stderr: | �[0;m�[1;31m20221214074855019 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214074855019 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214074855019 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214074855019 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214074855019 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214074855019 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214074855032 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/gprs:trx-lms+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214074855040 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214074855040 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214074855040 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:48:58.233047 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24438): Terminating (SIGTERM) 07:48:58.272126 run iperf3-srv_10.42.42.10(pid=24439): Terminating (SIGTERM) 07:48:58.312109 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24440): Terminating (SIGTERM) 07:48:58.351146 run iperf3-srv_10.42.42.10(pid=24441): Terminating (SIGTERM) 07:48:58.390556 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24444): Terminating (SIGTERM) 07:48:58.429717 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24447): Terminating (SIGTERM) 07:48:58.468851 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24450): Terminating (SIGTERM) 07:48:58.478028 --- ParallelTerminationStrategy: PID 24438 died... 07:48:58.530353 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24438): Terminated: ok {rc=0} 07:48:58.539777 --- ParallelTerminationStrategy: PID 24439 died... 07:48:58.591915 run iperf3-srv_10.42.42.10(pid=24439): Terminated {rc=256} 07:48:58.601447 --- ParallelTerminationStrategy: PID 24440 died... 07:48:58.653772 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24440): Terminated: ok {rc=0} 07:48:58.663542 --- ParallelTerminationStrategy: PID 24441 died... 07:48:58.715762 run iperf3-srv_10.42.42.10(pid=24441): Terminated {rc=256} 07:48:58.725288 --- ParallelTerminationStrategy: PID 24444 died... 07:48:58.777365 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24444): Terminated: ok {rc=0} 07:48:58.786786 --- ParallelTerminationStrategy: PID 24447 died... 07:48:58.839028 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24447): Terminated: ok {rc=0} 07:48:58.848453 --- ParallelTerminationStrategy: PID 24450 died... 07:48:58.900908 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24450): Terminated: ok {rc=0} 07:48:58.988486 bus /gobi_0: Setting Powered False 07:49:00.090750 bus /gobi_0: Setting Powered False 07:49:01.201171 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24448): Process ended prematurely: osmo-stp_10.42.42.5(pid=24448) [trial-2401↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24448)]