Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=22959): Process ended prematurely: osmo-stp_10.42.42.5(pid=22959) [trial-2401↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22959)]
Standard Output
---------------------------------------------- trial-2401 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 07:31:34.785505 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:31:34.797114 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 07:31:34.969240 tst cs_paging_gprs_active.py: using LAC 39366 07:31:35.094113 tst cs_paging_gprs_active.py: using RAC 96 07:31:35.214429 tst cs_paging_gprs_active.py: using CellId 39366 07:31:35.334051 tst cs_paging_gprs_active.py: using BVCI 39367 07:31:35.357960 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:31:35.368838 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:31:35.379928 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:31:35.390860 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:31:35.401732 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:31:35.412508 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:31:35.423454 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:31:35.434266 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:31:35.445365 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 07:31:35.567265 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 07:31:35.851664 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:31:35.980470 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:31:36.300188 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22949): Launched 07:31:36.565140 run iperf3-srv_10.42.42.10(pid=22950): Launched 07:31:36.752785 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:31:36.880308 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:31:37.200783 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22951): Launched 07:31:37.466753 run iperf3-srv_10.42.42.10(pid=22952): Launched 07:31:37.654044 tst cs_paging_gprs_active.py:38: start network... 07:31:37.781828 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:31:38.275041 run create_hlr_db(pid=22953): Launched 07:31:38.451104 bus /gobi_6: Setting Powered False 07:31:39.471766 run create_hlr_db(pid=22953): Terminated: ok {rc=0} 07:31:39.881069 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22955): Launched 07:31:40.187825 run osmo-hlr_10.42.42.2(pid=22956): Launched 07:31:40.310177 run osmo-stp_10.42.42.5: Starting osmo-stp 07:31:40.883644 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22958): Launched 07:31:41.214141 run osmo-stp_10.42.42.5(pid=22959): Launched 07:31:41.333881 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:31:41.908138 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22961): Launched 07:31:42.026469 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:31:42.315336 run patchelf(pid=22962): Launched 07:31:42.507771 run osmo-stp_10.42.42.5(pid=22959): ERR: Terminated: ERROR {rc=1} [trial-2401↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22959)] 07:31:42.647808 run osmo-stp_10.42.42.5(pid=22959): stdout: | (launched: 2022-12-14_07:31:41.051760) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:31:42.788131 run osmo-stp_10.42.42.5(pid=22959): stderr: | �[0;m�[38;5;43m20221214073141240 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214073141240 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214073141240 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214073141241 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214073141241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214073141241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214073141242 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:31:42.923873 run osmo-stp_10.42.42.5(pid=22959): stdout: | (launched: 2022-12-14_07:31:41.051760) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:31:43.058239 run osmo-stp_10.42.42.5(pid=22959): stderr: | �[0;m�[38;5;43m20221214073141240 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214073141240 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214073141240 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214073141241 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214073141241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214073141241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214073141242 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:31:43.215752 run patchelf(pid=22962): Terminating (SIGINT) 07:31:43.401243 run patchelf(pid=22962): Terminated: ok {rc=0} 07:31:43.435436 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=22959): Process ended prematurely: osmo-stp_10.42.42.5(pid=22959) [trial-2401↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22959)] [trial-2401↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 07:31:43.445366 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 07:31:43.508897 run osmo-hlr_10.42.42.2(pid=22956): ERR: Terminated: ERROR {rc=237} [trial-2401↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22956)] 07:31:43.560312 run osmo-hlr_10.42.42.2(pid=22956): stdout: | (launched: 2022-12-14_07:31:40.037417) 07:31:43.612122 run osmo-hlr_10.42.42.2(pid=22956): stderr: | �[0;m�[1;31m20221214073140211 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214073140211 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214073140211 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214073140211 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214073140211 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214073140211 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214073140224 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214073140232 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214073140232 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214073140232 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:31:43.656801 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22949): Terminating (SIGTERM) 07:31:43.699510 run iperf3-srv_10.42.42.10(pid=22950): Terminating (SIGTERM) 07:31:43.742235 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22951): Terminating (SIGTERM) 07:31:43.784088 run iperf3-srv_10.42.42.10(pid=22952): Terminating (SIGTERM) 07:31:43.826523 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22955): Terminating (SIGTERM) 07:31:43.868602 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22958): Terminating (SIGTERM) 07:31:43.911197 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22961): Terminating (SIGTERM) 07:31:43.920804 --- ParallelTerminationStrategy: PID 22949 died... 07:31:43.977114 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22949): Terminated: ok {rc=0} 07:31:43.987101 --- ParallelTerminationStrategy: PID 22950 died... 07:31:44.042861 run iperf3-srv_10.42.42.10(pid=22950): Terminated {rc=256} 07:31:44.052779 --- ParallelTerminationStrategy: PID 22951 died... 07:31:44.109175 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22951): Terminated: ok {rc=0} 07:31:44.119100 --- ParallelTerminationStrategy: PID 22952 died... 07:31:44.175045 run iperf3-srv_10.42.42.10(pid=22952): Terminated {rc=256} 07:31:44.185065 --- ParallelTerminationStrategy: PID 22955 died... 07:31:44.240931 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22955): Terminated: ok {rc=0} 07:31:44.250994 --- ParallelTerminationStrategy: PID 22958 died... 07:31:44.306817 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22958): Terminated: ok {rc=0} 07:31:44.316735 --- ParallelTerminationStrategy: PID 22961 died... 07:31:44.372526 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22961): Terminated: ok {rc=0} 07:31:44.459682 bus /gobi_0: Setting Powered False 07:31:45.566411 bus /gobi_0: Setting Powered False 07:31:46.707415 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22959): Process ended prematurely: osmo-stp_10.42.42.5(pid=22959) [trial-2401↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22959)]