Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=30875): Process ended prematurely: osmo-stp_10.42.42.5(pid=30875) [trial-2405↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30875)]
Standard Output
---------------------------------------------- trial-2405 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 14:05:59.882532 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 14:05:59.894464 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 14:06:00.032311 tst iperf3.py: using LAC 41415 14:06:00.150044 tst iperf3.py: using RAC 105 14:06:00.268084 tst iperf3.py: using CellId 41415 14:06:00.388182 tst iperf3.py: using BVCI 41416 14:06:00.411081 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 14:06:00.422548 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 14:06:00.433693 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 14:06:00.444785 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 14:06:00.456421 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 14:06:00.468081 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 14:06:00.479800 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 14:06:00.491363 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 14:06:00.503174 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 14:06:00.791592 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 14:06:00.942733 run iperf3-srv_10.42.42.10: Starting iperf3-srv 14:06:01.293929 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30867): Launched 14:06:01.594157 run iperf3-srv_10.42.42.10(pid=30868): Launched 14:06:01.797454 tst iperf3.py:8: start network... 14:06:01.937750 run osmo-hlr_10.42.42.2: Starting osmo-hlr 14:06:02.449923 run create_hlr_db(pid=30869): Launched 14:06:02.636855 bus /gobi_6: Setting Powered False 14:06:03.657646 run create_hlr_db(pid=30869): Terminated: ok {rc=0} 14:06:04.084073 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30871): Launched 14:06:04.405175 run osmo-hlr_10.42.42.2(pid=30872): Launched 14:06:04.522438 run osmo-stp_10.42.42.5: Starting osmo-stp 14:06:05.079779 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30874): Launched 14:06:05.401305 run osmo-stp_10.42.42.5(pid=30875): Launched 14:06:05.518127 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 14:06:06.077793 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30877): Launched 14:06:06.193079 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 14:06:06.472770 run patchelf(pid=30878): Launched 14:06:06.661001 run osmo-stp_10.42.42.5(pid=30875): ERR: Terminated: ERROR {rc=1} [trial-2405↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30875)] 14:06:06.798874 run osmo-stp_10.42.42.5(pid=30875): stdout: | (launched: 2022-12-14_14:06:05.243567) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:06:06.936824 run osmo-stp_10.42.42.5(pid=30875): stderr: | �[0;m�[38;5;43m20221214140605436 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214140605436 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214140605437 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214140605437 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214140605438 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214140605438 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214140605438 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:06:07.070283 run osmo-stp_10.42.42.5(pid=30875): stdout: | (launched: 2022-12-14_14:06:05.243567) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:06:07.203724 run osmo-stp_10.42.42.5(pid=30875): stderr: | �[0;m�[38;5;43m20221214140605436 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214140605436 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214140605437 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214140605437 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214140605438 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214140605438 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214140605438 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:06:07.357885 run patchelf(pid=30878): Terminating (SIGINT) 14:06:07.537818 run patchelf(pid=30878): Terminated: ok {rc=0} 14:06:07.570995 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=30875): Process ended prematurely: osmo-stp_10.42.42.5(pid=30875) [trial-2405↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30875)] [trial-2405↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 14:06:07.580920 tst iperf3.py:8: Test FAILED (7.7 sec) 14:06:07.644129 run osmo-hlr_10.42.42.2(pid=30872): ERR: Terminated: ERROR {rc=237} [trial-2405↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30872)] 14:06:07.695847 run osmo-hlr_10.42.42.2(pid=30872): stdout: | (launched: 2022-12-14_14:06:04.247972) 14:06:07.748507 run osmo-hlr_10.42.42.2(pid=30872): stderr: | �[0;m�[1;31m20221214140604448 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214140604448 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214140604448 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214140604448 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214140604448 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214140604448 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214140604460 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2405/run.2022-12-14_12-53-19/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214140604469 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214140604470 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214140604470 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 14:06:07.792886 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30867): Terminating (SIGTERM) 14:06:07.834677 run iperf3-srv_10.42.42.10(pid=30868): Terminating (SIGTERM) 14:06:07.876562 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30871): Terminating (SIGTERM) 14:06:07.918863 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30874): Terminating (SIGTERM) 14:06:07.960667 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30877): Terminating (SIGTERM) 14:06:07.970274 --- ParallelTerminationStrategy: PID 30867 died... 14:06:08.026336 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30867): Terminated: ok {rc=0} 14:06:08.036228 --- ParallelTerminationStrategy: PID 30868 died... 14:06:08.092011 run iperf3-srv_10.42.42.10(pid=30868): Terminated {rc=256} 14:06:08.101924 --- ParallelTerminationStrategy: PID 30871 died... 14:06:08.158267 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30871): Terminated: ok {rc=0} 14:06:08.168216 --- ParallelTerminationStrategy: PID 30874 died... 14:06:08.224250 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30874): Terminated: ok {rc=0} 14:06:08.234162 --- ParallelTerminationStrategy: PID 30877 died... 14:06:08.289881 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30877): Terminated: ok {rc=0} 14:06:08.375649 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30875): Process ended prematurely: osmo-stp_10.42.42.5(pid=30875) [trial-2405↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30875)]