Failed
gprs:oc2g+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=25574): Process ended prematurely: osmo-stp_10.42.42.5(pid=25574) [trial-2405↪gprs:oc2g+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25574)]
Standard Output
---------------------------------------------- trial-2405 gprs:oc2g+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 13:09:51.067959 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:09:51.079340 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 13:09:51.221185 tst ping_idle_ping.py: using LAC 41116 13:09:51.336942 tst ping_idle_ping.py: using RAC 61 13:09:51.452557 tst ping_idle_ping.py: using CellId 41116 13:09:51.570709 tst ping_idle_ping.py: using BVCI 41117 13:09:51.593325 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:09:51.604008 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:09:51.614541 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:09:51.624986 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:09:51.635328 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:09:51.645880 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:09:51.656438 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:09:51.666943 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 13:09:51.938285 tst ping_idle_ping.py:24: start network... 13:09:52.060697 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:09:52.536868 run create_hlr_db(pid=25568): Launched 13:09:52.707334 bus /gobi_6: Setting Powered False 13:09:53.729587 run create_hlr_db(pid=25568): Terminated: ok {rc=0} 13:09:54.151367 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25570): Launched 13:09:54.470774 run osmo-hlr_10.42.42.2(pid=25571): Launched 13:09:54.590396 run osmo-stp_10.42.42.5: Starting osmo-stp 13:09:55.140219 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25573): Launched 13:09:55.458538 run osmo-stp_10.42.42.5(pid=25574): Launched 13:09:55.575906 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:09:56.129678 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25576): Launched 13:09:56.243394 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:09:56.520007 run patchelf(pid=25577): Launched 13:09:56.705929 run osmo-stp_10.42.42.5(pid=25574): ERR: Terminated: ERROR {rc=1} [trial-2405↪gprs:oc2g+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25574)] 13:09:56.841789 run osmo-stp_10.42.42.5(pid=25574): stdout: | (launched: 2022-12-14_13:09:55.301679) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:09:56.978041 run osmo-stp_10.42.42.5(pid=25574): stderr: | �[0;m�[38;5;43m20221214130955493 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214130955494 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214130955494 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214130955494 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214130955495 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214130955495 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214130955495 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:09:57.110061 run osmo-stp_10.42.42.5(pid=25574): stdout: | (launched: 2022-12-14_13:09:55.301679) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:09:57.240732 run osmo-stp_10.42.42.5(pid=25574): stderr: | �[0;m�[38;5;43m20221214130955493 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214130955494 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214130955494 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214130955494 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214130955495 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214130955495 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214130955495 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:09:57.391895 run patchelf(pid=25577): Terminating (SIGINT) 13:09:57.570066 run patchelf(pid=25577): Terminated: ok {rc=0} 13:09:57.602165 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=25574): Process ended prematurely: osmo-stp_10.42.42.5(pid=25574) [trial-2405↪gprs:oc2g+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25574)] [trial-2405↪gprs:oc2g+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 13:09:57.611297 tst ping_idle_ping.py:27: Test FAILED (6.5 sec) 13:09:57.674875 run osmo-hlr_10.42.42.2(pid=25571): ERR: Terminated: ERROR {rc=237} [trial-2405↪gprs:oc2g+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25571)] 13:09:57.726387 run osmo-hlr_10.42.42.2(pid=25571): stdout: | (launched: 2022-12-14_13:09:54.313885) 13:09:57.778628 run osmo-hlr_10.42.42.2(pid=25571): stderr: | �[0;m�[1;31m20221214130954509 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214130954510 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214130954510 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214130954510 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214130954510 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214130954510 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214130954521 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2405/run.2022-12-14_12-53-19/gprs:oc2g+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214130954529 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214130954529 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214130954529 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:09:57.823302 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25570): Terminating (SIGTERM) 13:09:57.866104 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25573): Terminating (SIGTERM) 13:09:57.908426 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25576): Terminating (SIGTERM) 13:09:57.918227 --- ParallelTerminationStrategy: PID 25570 died... 13:09:57.975139 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25570): Terminated: ok {rc=0} 13:09:57.985372 --- ParallelTerminationStrategy: PID 25573 died... 13:09:58.042015 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25573): Terminated: ok {rc=0} 13:09:58.052157 --- ParallelTerminationStrategy: PID 25576 died... 13:09:58.108703 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25576): Terminated: ok {rc=0} 13:09:58.196458 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=25574): Process ended prematurely: osmo-stp_10.42.42.5(pid=25574) [trial-2405↪gprs:oc2g+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25574)]