Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=25184): Process ended prematurely: osmo-stp_10.42.42.5(pid=25184) [trial-2405↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25184)]
Standard Output
---------------------------------------------- trial-2405 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 13:07:59.271805 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:07:59.282835 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 13:07:59.411632 tst cs_paging_gprs_active.py: using LAC 41107 13:07:59.536846 tst cs_paging_gprs_active.py: using RAC 52 13:07:59.660606 tst cs_paging_gprs_active.py: using CellId 41107 13:07:59.785296 tst cs_paging_gprs_active.py: using BVCI 41108 13:07:59.809626 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:07:59.820618 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:07:59.831522 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:07:59.842341 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:07:59.853342 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:07:59.864291 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:07:59.875581 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:07:59.886587 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:07:59.897753 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:08:00.013965 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:08:00.307110 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:08:00.442642 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:08:00.773601 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25174): Launched 13:08:01.073097 run iperf3-srv_10.42.42.10(pid=25175): Launched 13:08:01.274223 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:08:01.411866 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:08:01.767246 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25176): Launched 13:08:02.084296 run iperf3-srv_10.42.42.10(pid=25177): Launched 13:08:02.276885 tst cs_paging_gprs_active.py:38: start network... 13:08:02.402072 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:08:02.882255 run create_hlr_db(pid=25178): Launched 13:08:03.054407 bus /gobi_6: Setting Powered False 13:08:04.076731 run create_hlr_db(pid=25178): Terminated: ok {rc=0} 13:08:04.502050 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25180): Launched 13:08:04.822253 run osmo-hlr_10.42.42.2(pid=25181): Launched 13:08:04.939268 run osmo-stp_10.42.42.5: Starting osmo-stp 13:08:05.495473 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25183): Launched 13:08:05.816419 run osmo-stp_10.42.42.5(pid=25184): Launched 13:08:05.933553 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:08:06.491891 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25186): Launched 13:08:06.606772 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:08:06.884715 run patchelf(pid=25187): Launched 13:08:07.072170 run osmo-stp_10.42.42.5(pid=25184): ERR: Terminated: ERROR {rc=1} [trial-2405↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25184)] 13:08:07.209667 run osmo-stp_10.42.42.5(pid=25184): stdout: | (launched: 2022-12-14_13:08:05.658839) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:08:07.347101 run osmo-stp_10.42.42.5(pid=25184): stderr: | �[0;m�[38;5;43m20221214130805850 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214130805850 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214130805851 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214130805851 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214130805852 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214130805852 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214130805852 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:08:07.480515 run osmo-stp_10.42.42.5(pid=25184): stdout: | (launched: 2022-12-14_13:08:05.658839) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:08:07.612131 run osmo-stp_10.42.42.5(pid=25184): stderr: | �[0;m�[38;5;43m20221214130805850 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214130805850 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214130805851 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214130805851 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214130805852 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214130805852 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214130805852 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:08:07.765305 run patchelf(pid=25187): Terminating (SIGINT) 13:08:07.943948 run patchelf(pid=25187): Terminated: ok {rc=0} 13:08:07.976834 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=25184): Process ended prematurely: osmo-stp_10.42.42.5(pid=25184) [trial-2405↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25184)] [trial-2405↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 13:08:07.986771 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 13:08:08.049964 run osmo-hlr_10.42.42.2(pid=25181): ERR: Terminated: ERROR {rc=237} [trial-2405↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25181)] 13:08:08.101538 run osmo-hlr_10.42.42.2(pid=25181): stdout: | (launched: 2022-12-14_13:08:04.665693) 13:08:08.153835 run osmo-hlr_10.42.42.2(pid=25181): stderr: | �[0;m�[1;31m20221214130804862 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214130804862 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214130804862 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214130804862 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214130804862 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214130804862 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214130804875 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2405/run.2022-12-14_12-53-19/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214130804883 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214130804883 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214130804883 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:08:08.198623 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25174): Terminating (SIGTERM) 13:08:08.240901 run iperf3-srv_10.42.42.10(pid=25175): Terminating (SIGTERM) 13:08:08.283261 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25176): Terminating (SIGTERM) 13:08:08.325187 run iperf3-srv_10.42.42.10(pid=25177): Terminating (SIGTERM) 13:08:08.367291 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25180): Terminating (SIGTERM) 13:08:08.410016 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25183): Terminating (SIGTERM) 13:08:08.452063 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25186): Terminating (SIGTERM) 13:08:08.461666 --- ParallelTerminationStrategy: PID 25174 died... 13:08:08.517915 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25174): Terminated: ok {rc=0} 13:08:08.527837 --- ParallelTerminationStrategy: PID 25175 died... 13:08:08.583347 run iperf3-srv_10.42.42.10(pid=25175): Terminated {rc=256} 13:08:08.593255 --- ParallelTerminationStrategy: PID 25176 died... 13:08:08.648809 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25176): Terminated: ok {rc=0} 13:08:08.658669 --- ParallelTerminationStrategy: PID 25177 died... 13:08:08.714225 run iperf3-srv_10.42.42.10(pid=25177): Terminated {rc=256} 13:08:08.724092 --- ParallelTerminationStrategy: PID 25180 died... 13:08:08.779664 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25180): Terminated: ok {rc=0} 13:08:08.789851 --- ParallelTerminationStrategy: PID 25183 died... 13:08:08.845033 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25183): Terminated: ok {rc=0} 13:08:08.854808 --- ParallelTerminationStrategy: PID 25186 died... 13:08:08.910352 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25186): Terminated: ok {rc=0} 13:08:08.997165 bus /gobi_0: Setting Powered False 13:08:10.101905 bus /gobi_0: Setting Powered False 13:08:11.211425 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=25184): Process ended prematurely: osmo-stp_10.42.42.5(pid=25184) [trial-2405↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25184)]