Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=26129): Process ended prematurely: osmo-stp_10.42.42.5(pid=26129) [trial-2405↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26129)]
Standard Output
---------------------------------------------- trial-2405 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 13:17:33.245960 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:17:33.256666 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 13:17:33.412878 tst cs_paging_gprs_active.py: using LAC 41158 13:17:33.534580 tst cs_paging_gprs_active.py: using RAC 103 13:17:33.653321 tst cs_paging_gprs_active.py: using CellId 41158 13:17:33.772010 tst cs_paging_gprs_active.py: using BVCI 41159 13:17:33.795090 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:17:33.805822 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:17:33.816246 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:17:33.826746 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:17:33.837176 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:17:33.848750 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:17:33.859996 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:17:33.870954 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:17:33.882058 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 13:17:34.000313 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 13:17:34.292306 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:17:34.428837 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:17:34.765061 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26119): Launched 13:17:35.042476 run iperf3-srv_10.42.42.10(pid=26120): Launched 13:17:35.241852 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:17:35.377320 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:17:35.712820 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26121): Launched 13:17:35.990573 run iperf3-srv_10.42.42.10(pid=26122): Launched 13:17:36.189807 tst cs_paging_gprs_active.py:38: start network... 13:17:36.325855 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:17:36.835676 run create_hlr_db(pid=26123): Launched 13:17:37.022774 bus /gobi_6: Setting Powered False 13:17:38.044546 run create_hlr_db(pid=26123): Terminated: ok {rc=0} 13:17:38.449905 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26125): Launched 13:17:38.753125 run osmo-hlr_10.42.42.2(pid=26126): Launched 13:17:38.866264 run osmo-stp_10.42.42.5: Starting osmo-stp 13:17:39.391037 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26128): Launched 13:17:39.694431 run osmo-stp_10.42.42.5(pid=26129): Launched 13:17:39.805672 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:17:40.332026 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26131): Launched 13:17:40.439330 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:17:40.702578 run patchelf(pid=26132): Launched 13:17:40.879341 run osmo-stp_10.42.42.5(pid=26129): ERR: Terminated: ERROR {rc=1} [trial-2405↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26129)] 13:17:41.008359 run osmo-stp_10.42.42.5(pid=26129): stdout: | (launched: 2022-12-14_13:17:39.545291) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:17:41.137928 run osmo-stp_10.42.42.5(pid=26129): stderr: | �[0;m�[38;5;43m20221214131739717 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214131739717 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214131739717 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214131739718 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214131739718 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214131739718 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214131739718 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:17:41.262960 run osmo-stp_10.42.42.5(pid=26129): stdout: | (launched: 2022-12-14_13:17:39.545291) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:17:41.386527 run osmo-stp_10.42.42.5(pid=26129): stderr: | �[0;m�[38;5;43m20221214131739717 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214131739717 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214131739717 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214131739718 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214131739718 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214131739718 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214131739718 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:17:41.531570 run patchelf(pid=26132): Terminating (SIGINT) 13:17:41.701526 run patchelf(pid=26132): Terminated: ok {rc=0} 13:17:41.732597 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26129): Process ended prematurely: osmo-stp_10.42.42.5(pid=26129) [trial-2405↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26129)] [trial-2405↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 13:17:41.741789 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 13:17:41.800903 run osmo-hlr_10.42.42.2(pid=26126): ERR: Terminated: ERROR {rc=237} [trial-2405↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26126)] 13:17:41.849553 run osmo-hlr_10.42.42.2(pid=26126): stdout: | (launched: 2022-12-14_13:17:38.603907) 13:17:41.898764 run osmo-hlr_10.42.42.2(pid=26126): stderr: | �[0;m�[1;31m20221214131738781 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214131738781 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214131738781 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214131738781 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214131738781 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214131738781 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214131738793 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2405/run.2022-12-14_12-53-19/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214131738803 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214131738803 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214131738803 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:17:41.940755 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26119): Terminating (SIGTERM) 13:17:41.979916 run iperf3-srv_10.42.42.10(pid=26120): Terminating (SIGTERM) 13:17:42.019422 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26121): Terminating (SIGTERM) 13:17:42.058469 run iperf3-srv_10.42.42.10(pid=26122): Terminating (SIGTERM) 13:17:42.097562 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26125): Terminating (SIGTERM) 13:17:42.136490 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26128): Terminating (SIGTERM) 13:17:42.175676 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26131): Terminating (SIGTERM) 13:17:42.184676 --- ParallelTerminationStrategy: PID 26119 died... 13:17:42.236867 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26119): Terminated: ok {rc=0} 13:17:42.246274 --- ParallelTerminationStrategy: PID 26120 died... 13:17:42.298051 run iperf3-srv_10.42.42.10(pid=26120): Terminated {rc=256} 13:17:42.307360 --- ParallelTerminationStrategy: PID 26121 died... 13:17:42.359711 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26121): Terminated: ok {rc=0} 13:17:42.369234 --- ParallelTerminationStrategy: PID 26122 died... 13:17:42.421273 run iperf3-srv_10.42.42.10(pid=26122): Terminated {rc=256} 13:17:42.430641 --- ParallelTerminationStrategy: PID 26125 died... 13:17:42.482652 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26125): Terminated: ok {rc=0} 13:17:42.491978 --- ParallelTerminationStrategy: PID 26128 died... 13:17:42.544105 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26128): Terminated: ok {rc=0} 13:17:42.553867 --- ParallelTerminationStrategy: PID 26131 died... 13:17:42.606008 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26131): Terminated: ok {rc=0} 13:17:42.688214 bus /gobi_0: Setting Powered False 13:17:43.794079 bus /gobi_0: Setting Powered False 13:17:44.904440 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26129): Process ended prematurely: osmo-stp_10.42.42.5(pid=26129) [trial-2405↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26129)]