Failed
gprs:trx-lms.cs_paging_gprs_active.py (from gprs_trx-lms)
Stacktrace
osmo-stp_10.42.42.5(pid=28899): Process ended prematurely: osmo-stp_10.42.42.5(pid=28899) [trial-2405↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28899)]
Standard Output
---------------------------------------------- trial-2405 gprs:trx-lms cs_paging_gprs_active.py ---------------------------------------------- 13:41:35.588588 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:41:35.599458 tst gprs:trx-lms: Using 1 x bts (candidates: 1) 13:41:35.741631 tst cs_paging_gprs_active.py: using LAC 41286 13:41:35.864450 tst cs_paging_gprs_active.py: using RAC 231 13:41:35.981567 tst cs_paging_gprs_active.py: using CellId 41286 13:41:36.099265 tst cs_paging_gprs_active.py: using BVCI 41287 13:41:36.122744 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:41:36.133430 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:41:36.143694 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:41:36.154083 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:41:36.164160 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:41:36.174426 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:41:36.184751 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:41:36.194946 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:41:36.205297 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 13:41:36.325233 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 13:41:36.605888 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:41:36.732345 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:41:37.048540 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28889): Launched 13:41:37.311127 run iperf3-srv_10.42.42.10(pid=28890): Launched 13:41:37.496213 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:41:37.622446 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:41:37.937248 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28891): Launched 13:41:38.199540 run iperf3-srv_10.42.42.10(pid=28892): Launched 13:41:38.384114 tst cs_paging_gprs_active.py:38: start network... 13:41:38.510366 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:41:38.995880 run create_hlr_db(pid=28893): Launched 13:41:39.170394 bus /sierra_2: Setting Powered False 13:41:40.192333 run create_hlr_db(pid=28893): Terminated: ok {rc=0} 13:41:40.596923 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28895): Launched 13:41:40.901374 run osmo-hlr_10.42.42.2(pid=28896): Launched 13:41:41.013114 run osmo-stp_10.42.42.5: Starting osmo-stp 13:41:41.538801 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28898): Launched 13:41:41.843186 run osmo-stp_10.42.42.5(pid=28899): Launched 13:41:41.955126 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:41:42.486420 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28901): Launched 13:41:42.594501 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:41:42.859171 run patchelf(pid=28902): Launched 13:41:43.037079 run osmo-stp_10.42.42.5(pid=28899): ERR: Terminated: ERROR {rc=1} [trial-2405↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28899)] 13:41:43.166340 run osmo-stp_10.42.42.5(pid=28899): stdout: | (launched: 2022-12-14_13:41:41.692829) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:41:43.295917 run osmo-stp_10.42.42.5(pid=28899): stderr: | �[0;m�[38;5;43m20221214134141862 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214134141862 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214134141863 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214134141863 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214134141865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214134141865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214134141865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:41:43.421126 run osmo-stp_10.42.42.5(pid=28899): stdout: | (launched: 2022-12-14_13:41:41.692829) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:41:43.545340 run osmo-stp_10.42.42.5(pid=28899): stderr: | �[0;m�[38;5;43m20221214134141862 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214134141862 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214134141863 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214134141863 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214134141865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214134141865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214134141865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:41:43.689784 run patchelf(pid=28902): Terminating (SIGINT) 13:41:43.860108 run patchelf(pid=28902): Terminated: ok {rc=0} 13:41:43.891411 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28899): Process ended prematurely: osmo-stp_10.42.42.5(pid=28899) [trial-2405↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28899)] [trial-2405↪gprs:trx-lms↪cs_paging_gprs_active.py:38] 13:41:43.900552 tst cs_paging_gprs_active.py:38: Test FAILED (8.3 sec) 13:41:43.959929 run osmo-hlr_10.42.42.2(pid=28896): ERR: Terminated: ERROR {rc=237} [trial-2405↪gprs:trx-lms↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28896)] 13:41:44.008478 run osmo-hlr_10.42.42.2(pid=28896): stdout: | (launched: 2022-12-14_13:41:40.751271) 13:41:44.057749 run osmo-hlr_10.42.42.2(pid=28896): stderr: | �[0;m�[1;31m20221214134140928 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214134140928 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214134140928 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214134140929 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214134140929 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214134140929 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214134140940 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2405/run.2022-12-14_12-53-19/gprs:trx-lms/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214134140949 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214134140949 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214134140949 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:41:44.099488 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28889): Terminating (SIGTERM) 13:41:44.139270 run iperf3-srv_10.42.42.10(pid=28890): Terminating (SIGTERM) 13:41:44.178478 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28891): Terminating (SIGTERM) 13:41:44.217616 run iperf3-srv_10.42.42.10(pid=28892): Terminating (SIGTERM) 13:41:44.256809 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28895): Terminating (SIGTERM) 13:41:44.295838 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28898): Terminating (SIGTERM) 13:41:44.334971 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28901): Terminating (SIGTERM) 13:41:44.344207 --- ParallelTerminationStrategy: PID 28889 died... 13:41:44.397134 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28889): Terminated: ok {rc=0} 13:41:44.406637 --- ParallelTerminationStrategy: PID 28890 died... 13:41:44.459299 run iperf3-srv_10.42.42.10(pid=28890): Terminated {rc=256} 13:41:44.468709 --- ParallelTerminationStrategy: PID 28891 died... 13:41:44.521319 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28891): Terminated: ok {rc=0} 13:41:44.530822 --- ParallelTerminationStrategy: PID 28892 died... 13:41:44.583236 run iperf3-srv_10.42.42.10(pid=28892): Terminated {rc=256} 13:41:44.592668 --- ParallelTerminationStrategy: PID 28895 died... 13:41:44.645479 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28895): Terminated: ok {rc=0} 13:41:44.655017 --- ParallelTerminationStrategy: PID 28898 died... 13:41:44.707557 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28898): Terminated: ok {rc=0} 13:41:44.717172 --- ParallelTerminationStrategy: PID 28901 died... 13:41:44.769624 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28901): Terminated: ok {rc=0} 13:41:44.856628 bus /gobi_0: Setting Powered False 13:41:45.969461 bus /gobi_0: Setting Powered False 13:41:47.081555 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28899): Process ended prematurely: osmo-stp_10.42.42.5(pid=28899) [trial-2405↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28899)]