Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=26973): Process ended prematurely: osmo-stp_10.42.42.5(pid=26973) [trial-2405↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26973)]
Standard Output
---------------------------------------------- trial-2405 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 13:25:26.572708 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:25:26.583827 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 13:25:26.720467 tst cs_paging_gprs_active.py: using LAC 41200 13:25:26.839212 tst cs_paging_gprs_active.py: using RAC 145 13:25:26.959836 tst cs_paging_gprs_active.py: using CellId 41200 13:25:27.082731 tst cs_paging_gprs_active.py: using BVCI 41201 13:25:27.105858 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:25:27.116670 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:25:27.127337 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:25:27.137894 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:25:27.148772 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:25:27.159846 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:25:27.171103 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:25:27.182113 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:25:27.193157 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:25:27.313217 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:25:27.590407 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:25:27.715849 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:25:28.027919 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26963): Launched 13:25:28.286423 run iperf3-srv_10.42.42.10(pid=26964): Launched 13:25:28.469866 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:25:28.594933 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:25:28.906518 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26965): Launched 13:25:29.164552 run iperf3-srv_10.42.42.10(pid=26966): Launched 13:25:29.348295 tst cs_paging_gprs_active.py:38: start network... 13:25:29.473321 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:25:29.953389 run create_hlr_db(pid=26967): Launched 13:25:30.126294 bus /gobi_6: Setting Powered False 13:25:31.204319 run create_hlr_db(pid=26967): Terminated: ok {rc=0} 13:25:31.675813 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26969): Launched 13:25:32.106603 run osmo-hlr_10.42.42.2(pid=26970): Launched 13:25:32.243732 run osmo-stp_10.42.42.5: Starting osmo-stp 13:25:32.804753 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26972): Launched 13:25:33.129738 run osmo-stp_10.42.42.5(pid=26973): Launched 13:25:33.248612 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:25:33.813176 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26975): Launched 13:25:33.929833 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:25:34.211805 run patchelf(pid=26976): Launched 13:25:34.401627 run osmo-stp_10.42.42.5(pid=26973): ERR: Terminated: ERROR {rc=1} [trial-2405↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26973)] 13:25:34.540034 run osmo-stp_10.42.42.5(pid=26973): stdout: | (launched: 2022-12-14_13:25:32.970175) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:25:34.679131 run osmo-stp_10.42.42.5(pid=26973): stderr: | �[0;m�[38;5;43m20221214132533163 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214132533163 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214132533163 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214132533163 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214132533164 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214132533164 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214132533164 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:25:34.813627 run osmo-stp_10.42.42.5(pid=26973): stdout: | (launched: 2022-12-14_13:25:32.970175) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:25:34.947459 run osmo-stp_10.42.42.5(pid=26973): stderr: | �[0;m�[38;5;43m20221214132533163 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214132533163 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214132533163 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214132533163 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214132533164 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214132533164 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214132533164 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:25:35.102847 run patchelf(pid=26976): Terminating (SIGINT) 13:25:35.284272 run patchelf(pid=26976): Terminated: ok {rc=0} 13:25:35.317938 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26973): Process ended prematurely: osmo-stp_10.42.42.5(pid=26973) [trial-2405↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26973)] [trial-2405↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 13:25:35.327926 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 13:25:35.391617 run osmo-hlr_10.42.42.2(pid=26970): ERR: Terminated: ERROR {rc=237} [trial-2405↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26970)] 13:25:35.443417 run osmo-hlr_10.42.42.2(pid=26970): stdout: | (launched: 2022-12-14_13:25:31.844092) 13:25:35.495696 run osmo-hlr_10.42.42.2(pid=26970): stderr: | �[0;m�[1;31m20221214132532159 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214132532159 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214132532159 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214132532159 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214132532159 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214132532159 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214132532187 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2405/run.2022-12-14_12-53-19/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214132532203 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214132532203 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214132532203 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:25:35.540570 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26963): Terminating (SIGTERM) 13:25:35.583139 run iperf3-srv_10.42.42.10(pid=26964): Terminating (SIGTERM) 13:25:35.625656 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26965): Terminating (SIGTERM) 13:25:35.668102 run iperf3-srv_10.42.42.10(pid=26966): Terminating (SIGTERM) 13:25:35.710753 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26969): Terminating (SIGTERM) 13:25:35.753146 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26972): Terminating (SIGTERM) 13:25:35.795628 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26975): Terminating (SIGTERM) 13:25:35.805337 --- ParallelTerminationStrategy: PID 26963 died... 13:25:35.862523 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26963): Terminated: ok {rc=0} 13:25:35.872528 --- ParallelTerminationStrategy: PID 26964 died... 13:25:35.929091 run iperf3-srv_10.42.42.10(pid=26964): Terminated {rc=256} 13:25:35.939415 --- ParallelTerminationStrategy: PID 26965 died... 13:25:35.995645 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26965): Terminated: ok {rc=0} 13:25:36.005665 --- ParallelTerminationStrategy: PID 26966 died... 13:25:36.061680 run iperf3-srv_10.42.42.10(pid=26966): Terminated {rc=256} 13:25:36.071606 --- ParallelTerminationStrategy: PID 26969 died... 13:25:36.127666 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26969): Terminated: ok {rc=0} 13:25:36.137683 --- ParallelTerminationStrategy: PID 26972 died... 13:25:36.193529 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26972): Terminated: ok {rc=0} 13:25:36.203484 --- ParallelTerminationStrategy: PID 26975 died... 13:25:36.259513 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26975): Terminated: ok {rc=0} 13:25:36.345903 bus /gobi_0: Setting Powered False 13:25:37.451683 bus /gobi_0: Setting Powered False 13:25:38.563598 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26973): Process ended prematurely: osmo-stp_10.42.42.5(pid=26973) [trial-2405↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26973)]