Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=11205): Process ended prematurely: osmo-stp_10.42.42.5(pid=11205) [trial-2380↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11205)]
Standard Output
---------------------------------------------- trial-2380 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 18:13:52.232197 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:13:52.243170 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 18:13:52.379905 tst cs_paging_gprs_active.py: using LAC 30597 18:13:52.500228 tst cs_paging_gprs_active.py: using RAC 252 18:13:52.619752 tst cs_paging_gprs_active.py: using CellId 30597 18:13:52.740131 tst cs_paging_gprs_active.py: using BVCI 30598 18:13:52.763592 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:13:52.774744 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:13:52.786026 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:13:52.797374 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:13:52.808234 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:13:52.819477 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:13:52.830696 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:13:52.841702 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:13:52.853109 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 18:13:52.970121 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 18:13:53.251390 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 18:13:53.378361 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:13:53.697485 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11195): Launched 18:13:53.962173 run iperf3-srv_10.42.42.10(pid=11196): Launched 18:13:54.148672 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 18:13:54.275926 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:13:54.596478 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11197): Launched 18:13:54.861342 run iperf3-srv_10.42.42.10(pid=11198): Launched 18:13:55.047585 tst cs_paging_gprs_active.py:38: start network... 18:13:55.175269 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:13:55.658764 run create_hlr_db(pid=11199): Launched 18:13:55.835257 bus /gobi_6: Setting Powered False 18:13:56.856599 run create_hlr_db(pid=11199): Terminated: ok {rc=0} 18:13:57.295313 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11201): Launched 18:13:57.625852 run osmo-hlr_10.42.42.2(pid=11202): Launched 18:13:57.744455 run osmo-stp_10.42.42.5: Starting osmo-stp 18:13:58.315569 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11204): Launched 18:13:58.647688 run osmo-stp_10.42.42.5(pid=11205): Launched 18:13:58.766573 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:13:59.343317 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11207): Launched 18:13:59.460682 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:13:59.750910 run patchelf(pid=11208): Launched 18:13:59.942036 run osmo-stp_10.42.42.5(pid=11205): ERR: Terminated: ERROR {rc=1} [trial-2380↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11205)] 18:14:00.081479 run osmo-stp_10.42.42.5(pid=11205): stdout: | (launched: 2022-12-12_18:13:58.483190) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:14:00.221528 run osmo-stp_10.42.42.5(pid=11205): stderr: | �[0;m�[38;5;43m20221212181358674 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212181358674 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212181358674 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212181358675 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212181358675 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212181358675 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212181358675 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:14:00.356673 run osmo-stp_10.42.42.5(pid=11205): stdout: | (launched: 2022-12-12_18:13:58.483190) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:14:00.490424 run osmo-stp_10.42.42.5(pid=11205): stderr: | �[0;m�[38;5;43m20221212181358674 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212181358674 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212181358674 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212181358675 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212181358675 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212181358675 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212181358675 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:14:00.647290 run patchelf(pid=11208): Terminating (SIGINT) 18:14:00.830308 run patchelf(pid=11208): Terminated: ok {rc=0} 18:14:00.866093 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11205): Process ended prematurely: osmo-stp_10.42.42.5(pid=11205) [trial-2380↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11205)] [trial-2380↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 18:14:00.876734 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 18:14:00.942222 run osmo-hlr_10.42.42.2(pid=11202): ERR: Terminated: ERROR {rc=237} [trial-2380↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11202)] 18:14:00.994675 run osmo-hlr_10.42.42.2(pid=11202): stdout: | (launched: 2022-12-12_18:13:57.462793) 18:14:01.047692 run osmo-hlr_10.42.42.2(pid=11202): stderr: | �[0;m�[1;31m20221212181357659 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212181357659 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212181357659 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212181357659 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212181357659 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212181357659 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212181357672 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212181357683 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212181357683 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212181357684 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:14:01.093129 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11195): Terminating (SIGTERM) 18:14:01.136881 run iperf3-srv_10.42.42.10(pid=11196): Terminating (SIGTERM) 18:14:01.182905 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11197): Terminating (SIGTERM) 18:14:01.227649 run iperf3-srv_10.42.42.10(pid=11198): Terminating (SIGTERM) 18:14:01.272141 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11201): Terminating (SIGTERM) 18:14:01.315868 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11204): Terminating (SIGTERM) 18:14:01.360068 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11207): Terminating (SIGTERM) 18:14:01.370042 --- ParallelTerminationStrategy: PID 11195 died... 18:14:01.426614 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11195): Terminated: ok {rc=0} 18:14:01.437208 --- ParallelTerminationStrategy: PID 11196 died... 18:14:01.493656 run iperf3-srv_10.42.42.10(pid=11196): Terminated {rc=256} 18:14:01.504677 --- ParallelTerminationStrategy: PID 11197 died... 18:14:01.561230 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11197): Terminated: ok {rc=0} 18:14:01.571817 --- ParallelTerminationStrategy: PID 11198 died... 18:14:01.628511 run iperf3-srv_10.42.42.10(pid=11198): Terminated {rc=256} 18:14:01.638949 --- ParallelTerminationStrategy: PID 11201 died... 18:14:01.695136 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11201): Terminated: ok {rc=0} 18:14:01.705633 --- ParallelTerminationStrategy: PID 11204 died... 18:14:01.762074 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11204): Terminated: ok {rc=0} 18:14:01.772566 --- ParallelTerminationStrategy: PID 11207 died... 18:14:01.829288 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11207): Terminated: ok {rc=0} 18:14:01.918473 bus /gobi_0: Setting Powered False 18:14:03.023226 bus /gobi_0: Setting Powered False 18:14:04.132013 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11205): Process ended prematurely: osmo-stp_10.42.42.5(pid=11205) [trial-2380↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11205)]