Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=15911): Process ended prematurely: osmo-stp_10.42.42.5(pid=15911) [trial-2380↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15911)]
Standard Output
---------------------------------------------- trial-2380 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 18:54:25.957901 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:54:25.969903 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 18:54:26.115421 tst cs_paging_gprs_active.py: using LAC 30811 18:54:26.245332 tst cs_paging_gprs_active.py: using RAC 211 18:54:26.374787 tst cs_paging_gprs_active.py: using CellId 30811 18:54:26.504645 tst cs_paging_gprs_active.py: using BVCI 30812 18:54:26.529851 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:54:26.541765 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:54:26.553564 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:54:26.565945 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:54:26.578326 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:54:26.590682 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:54:26.603058 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:54:26.615272 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:54:26.627766 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 18:54:26.750158 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 18:54:27.037565 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 18:54:27.165148 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:54:27.485295 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15901): Launched 18:54:27.751043 run iperf3-srv_10.42.42.10(pid=15902): Launched 18:54:27.937394 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 18:54:28.064521 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:54:28.383103 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15903): Launched 18:54:28.648226 run iperf3-srv_10.42.42.10(pid=15904): Launched 18:54:28.834390 tst cs_paging_gprs_active.py:38: start network... 18:54:28.961494 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:54:29.448103 run create_hlr_db(pid=15905): Launched 18:54:29.624406 bus /gobi_6: Setting Powered False 18:54:30.646276 run create_hlr_db(pid=15905): Terminated: ok {rc=0} 18:54:31.080896 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15907): Launched 18:54:31.448365 run osmo-hlr_10.42.42.2(pid=15908): Launched 18:54:31.597509 run osmo-stp_10.42.42.5: Starting osmo-stp 18:54:32.269598 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15910): Launched 18:54:32.603610 run osmo-stp_10.42.42.5(pid=15911): Launched 18:54:32.722674 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:54:33.291330 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15913): Launched 18:54:33.407517 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:54:33.693866 run patchelf(pid=15914): Launched 18:54:33.883980 run osmo-stp_10.42.42.5(pid=15911): ERR: Terminated: ERROR {rc=1} [trial-2380↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15911)] 18:54:34.022779 run osmo-stp_10.42.42.5(pid=15911): stdout: | (launched: 2022-12-12_18:54:32.439500) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:54:34.161990 run osmo-stp_10.42.42.5(pid=15911): stderr: | �[0;m�[38;5;43m20221212185432631 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212185432632 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212185432632 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212185432632 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212185432633 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212185432633 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212185432633 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:54:34.295897 run osmo-stp_10.42.42.5(pid=15911): stdout: | (launched: 2022-12-12_18:54:32.439500) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:54:34.430293 run osmo-stp_10.42.42.5(pid=15911): stderr: | �[0;m�[38;5;43m20221212185432631 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212185432632 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212185432632 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212185432632 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212185432633 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212185432633 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212185432633 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:54:34.587807 run patchelf(pid=15914): Terminating (SIGINT) 18:54:34.770548 run patchelf(pid=15914): Terminated: ok {rc=0} 18:54:34.804298 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=15911): Process ended prematurely: osmo-stp_10.42.42.5(pid=15911) [trial-2380↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15911)] [trial-2380↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 18:54:34.814689 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 18:54:34.877926 run osmo-hlr_10.42.42.2(pid=15908): ERR: Terminated: ERROR {rc=237} [trial-2380↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15908)] 18:54:34.929411 run osmo-hlr_10.42.42.2(pid=15908): stdout: | (launched: 2022-12-12_18:54:31.253169) 18:54:34.981505 run osmo-hlr_10.42.42.2(pid=15908): stderr: | �[0;m�[1;31m20221212185431611 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212185431611 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212185431611 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212185431611 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212185431611 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212185431611 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212185431631 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212185431653 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212185431653 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212185431653 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:54:35.026034 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15901): Terminating (SIGTERM) 18:54:35.067821 run iperf3-srv_10.42.42.10(pid=15902): Terminating (SIGTERM) 18:54:35.109939 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15903): Terminating (SIGTERM) 18:54:35.151887 run iperf3-srv_10.42.42.10(pid=15904): Terminating (SIGTERM) 18:54:35.194016 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15907): Terminating (SIGTERM) 18:54:35.236402 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15910): Terminating (SIGTERM) 18:54:35.278524 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15913): Terminating (SIGTERM) 18:54:35.288236 --- ParallelTerminationStrategy: PID 15901 died... 18:54:35.344269 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15901): Terminated: ok {rc=0} 18:54:35.354282 --- ParallelTerminationStrategy: PID 15902 died... 18:54:35.409808 run iperf3-srv_10.42.42.10(pid=15902): Terminated {rc=256} 18:54:35.420161 --- ParallelTerminationStrategy: PID 15903 died... 18:54:35.476116 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15903): Terminated: ok {rc=0} 18:54:35.486050 --- ParallelTerminationStrategy: PID 15904 died... 18:54:35.541677 run iperf3-srv_10.42.42.10(pid=15904): Terminated {rc=256} 18:54:35.551689 --- ParallelTerminationStrategy: PID 15907 died... 18:54:35.607478 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15907): Terminated: ok {rc=0} 18:54:35.617488 --- ParallelTerminationStrategy: PID 15910 died... 18:54:35.673155 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15910): Terminated: ok {rc=0} 18:54:35.683171 --- ParallelTerminationStrategy: PID 15913 died... 18:54:35.739507 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15913): Terminated: ok {rc=0} 18:54:35.827159 bus /gobi_0: Setting Powered False 18:54:36.935379 bus /gobi_0: Setting Powered False 18:54:38.048608 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15911): Process ended prematurely: osmo-stp_10.42.42.5(pid=15911) [trial-2380↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15911)]