Failed
gprs:trx-lms+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=13340): Process ended prematurely: osmo-stp_10.42.42.5(pid=13340) [trial-2380↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13340)]
Standard Output
---------------------------------------------- trial-2380 gprs:trx-lms+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 18:33:01.963414 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:33:01.979313 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 18:33:02.158364 tst cs_paging_gprs_active.py: using LAC 30698 18:33:02.291566 tst cs_paging_gprs_active.py: using RAC 98 18:33:02.419170 tst cs_paging_gprs_active.py: using CellId 30698 18:33:02.549551 tst cs_paging_gprs_active.py: using BVCI 30699 18:33:02.574838 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:33:02.586513 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:33:02.598012 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:33:02.609698 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:33:02.621143 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:33:02.632544 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:33:02.644108 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:33:02.655441 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:33:02.667174 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 18:33:02.784292 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 18:33:03.089552 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 18:33:03.225670 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:33:03.563452 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13330): Launched 18:33:03.842996 run iperf3-srv_10.42.42.10(pid=13331): Launched 18:33:04.042263 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 18:33:04.178371 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:33:04.515865 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13332): Launched 18:33:04.796899 run iperf3-srv_10.42.42.10(pid=13333): Launched 18:33:04.995926 tst cs_paging_gprs_active.py:38: start network... 18:33:05.132128 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:33:05.653589 run create_hlr_db(pid=13334): Launched 18:33:05.841497 bus /gobi_6: Setting Powered False 18:33:06.863719 run create_hlr_db(pid=13334): Terminated: ok {rc=0} 18:33:07.271751 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13336): Launched 18:33:07.580781 run osmo-hlr_10.42.42.2(pid=13337): Launched 18:33:07.699987 run osmo-stp_10.42.42.5: Starting osmo-stp 18:33:08.232233 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13339): Launched 18:33:08.538091 run osmo-stp_10.42.42.5(pid=13340): Launched 18:33:08.648707 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:33:09.177684 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13342): Launched 18:33:09.285796 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:33:09.551166 run patchelf(pid=13343): Launched 18:33:09.731064 run osmo-stp_10.42.42.5(pid=13340): ERR: Terminated: ERROR {rc=1} [trial-2380↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13340)] 18:33:09.860706 run osmo-stp_10.42.42.5(pid=13340): stdout: | (launched: 2022-12-12_18:33:08.386564) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:33:09.991016 run osmo-stp_10.42.42.5(pid=13340): stderr: | �[0;m�[38;5;43m20221212183308554 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212183308554 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212183308555 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212183308555 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212183308555 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212183308556 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212183308556 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:33:10.116406 run osmo-stp_10.42.42.5(pid=13340): stdout: | (launched: 2022-12-12_18:33:08.386564) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:33:10.240696 run osmo-stp_10.42.42.5(pid=13340): stderr: | �[0;m�[38;5;43m20221212183308554 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212183308554 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212183308555 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212183308555 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212183308555 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212183308556 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212183308556 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:33:10.386199 run patchelf(pid=13343): Terminating (SIGINT) 18:33:10.556380 run patchelf(pid=13343): Terminated: ok {rc=0} 18:33:10.587971 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13340): Process ended prematurely: osmo-stp_10.42.42.5(pid=13340) [trial-2380↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13340)] [trial-2380↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 18:33:10.597345 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 18:33:10.658443 run osmo-hlr_10.42.42.2(pid=13337): ERR: Terminated: ERROR {rc=237} [trial-2380↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13337)] 18:33:10.707841 run osmo-hlr_10.42.42.2(pid=13337): stdout: | (launched: 2022-12-12_18:33:07.426542) 18:33:10.758024 run osmo-hlr_10.42.42.2(pid=13337): stderr: | �[0;m�[1;31m20221212183307601 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212183307601 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212183307601 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212183307601 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212183307601 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212183307601 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212183307614 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/gprs:trx-lms+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212183307622 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212183307622 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212183307622 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:33:10.800440 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13330): Terminating (SIGTERM) 18:33:10.840738 run iperf3-srv_10.42.42.10(pid=13331): Terminating (SIGTERM) 18:33:10.881019 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13332): Terminating (SIGTERM) 18:33:10.920822 run iperf3-srv_10.42.42.10(pid=13333): Terminating (SIGTERM) 18:33:10.961315 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13336): Terminating (SIGTERM) 18:33:11.001323 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13339): Terminating (SIGTERM) 18:33:11.041294 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13342): Terminating (SIGTERM) 18:33:11.050843 --- ParallelTerminationStrategy: PID 13330 died... 18:33:11.104121 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13330): Terminated: ok {rc=0} 18:33:11.114057 --- ParallelTerminationStrategy: PID 13331 died... 18:33:11.167103 run iperf3-srv_10.42.42.10(pid=13331): Terminated {rc=256} 18:33:11.176907 --- ParallelTerminationStrategy: PID 13332 died... 18:33:11.230155 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13332): Terminated: ok {rc=0} 18:33:11.239644 --- ParallelTerminationStrategy: PID 13333 died... 18:33:11.292346 run iperf3-srv_10.42.42.10(pid=13333): Terminated {rc=256} 18:33:11.302170 --- ParallelTerminationStrategy: PID 13336 died... 18:33:11.354950 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13336): Terminated: ok {rc=0} 18:33:11.364760 --- ParallelTerminationStrategy: PID 13339 died... 18:33:11.418307 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13339): Terminated: ok {rc=0} 18:33:11.428166 --- ParallelTerminationStrategy: PID 13342 died... 18:33:11.481307 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13342): Terminated: ok {rc=0} 18:33:11.570517 bus /gobi_0: Setting Powered False 18:33:12.674351 bus /gobi_0: Setting Powered False 18:33:13.785286 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13340): Process ended prematurely: osmo-stp_10.42.42.5(pid=13340) [trial-2380↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13340)]