Failed
gprs:trx-lms+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=21909): Process ended prematurely: osmo-stp_10.42.42.5(pid=21909) [trial-2381↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21909)]
Standard Output
---------------------------------------------- trial-2381 gprs:trx-lms+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 20:00:29.899889 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:00:29.911098 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 20:00:30.067732 tst cs_paging_gprs_active.py: using LAC 31159 20:00:30.189248 tst cs_paging_gprs_active.py: using RAC 49 20:00:30.310139 tst cs_paging_gprs_active.py: using CellId 31159 20:00:30.428383 tst cs_paging_gprs_active.py: using BVCI 31160 20:00:30.451717 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:00:30.462649 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:00:30.473385 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:00:30.484258 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:00:30.495167 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:00:30.506114 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:00:30.517227 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:00:30.528502 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:00:30.539676 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:00:30.655359 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:00:30.940432 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:00:31.069353 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:00:31.411291 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21899): Launched 20:00:31.699429 run iperf3-srv_10.42.42.10(pid=21900): Launched 20:00:31.889224 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:00:32.017752 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:00:32.352267 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21901): Launched 20:00:32.633759 run iperf3-srv_10.42.42.10(pid=21902): Launched 20:00:32.832267 tst cs_paging_gprs_active.py:38: start network... 20:00:32.967015 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:00:33.479930 run create_hlr_db(pid=21903): Launched 20:00:33.667811 bus /gobi_6: Setting Powered False 20:00:34.689707 run create_hlr_db(pid=21903): Terminated: ok {rc=0} 20:00:35.122782 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21905): Launched 20:00:35.448472 run osmo-hlr_10.42.42.2(pid=21906): Launched 20:00:35.566159 run osmo-stp_10.42.42.5: Starting osmo-stp 20:00:36.130679 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21908): Launched 20:00:36.458394 run osmo-stp_10.42.42.5(pid=21909): Launched 20:00:36.576706 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:00:37.145165 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21911): Launched 20:00:37.260564 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:00:37.545667 run patchelf(pid=21912): Launched 20:00:37.738567 run osmo-stp_10.42.42.5(pid=21909): ERR: Terminated: ERROR {rc=1} [trial-2381↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21909)] 20:00:37.878148 run osmo-stp_10.42.42.5(pid=21909): stdout: | (launched: 2022-12-12_20:00:36.295583) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:00:38.017844 run osmo-stp_10.42.42.5(pid=21909): stderr: | �[0;m�[38;5;43m20221212200036485 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212200036485 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212200036486 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212200036486 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212200036487 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212200036487 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212200036487 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:00:38.152607 run osmo-stp_10.42.42.5(pid=21909): stdout: | (launched: 2022-12-12_20:00:36.295583) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:00:38.285354 run osmo-stp_10.42.42.5(pid=21909): stderr: | �[0;m�[38;5;43m20221212200036485 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212200036485 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212200036486 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212200036486 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212200036487 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212200036487 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212200036487 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:00:38.440917 run patchelf(pid=21912): Terminating (SIGINT) 20:00:38.623234 run patchelf(pid=21912): Terminated: ok {rc=0} 20:00:38.656839 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21909): Process ended prematurely: osmo-stp_10.42.42.5(pid=21909) [trial-2381↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21909)] [trial-2381↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 20:00:38.667301 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 20:00:38.731964 run osmo-hlr_10.42.42.2(pid=21906): ERR: Terminated: ERROR {rc=237} [trial-2381↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21906)] 20:00:38.784165 run osmo-hlr_10.42.42.2(pid=21906): stdout: | (launched: 2022-12-12_20:00:35.287726) 20:00:38.837193 run osmo-hlr_10.42.42.2(pid=21906): stderr: | �[0;m�[1;31m20221212200035484 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212200035484 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212200035484 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212200035484 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212200035484 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212200035484 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212200035497 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:trx-lms+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212200035505 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212200035505 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212200035505 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:00:38.881838 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21899): Terminating (SIGTERM) 20:00:38.924020 run iperf3-srv_10.42.42.10(pid=21900): Terminating (SIGTERM) 20:00:38.966193 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21901): Terminating (SIGTERM) 20:00:39.008253 run iperf3-srv_10.42.42.10(pid=21902): Terminating (SIGTERM) 20:00:39.050717 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21905): Terminating (SIGTERM) 20:00:39.092843 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21908): Terminating (SIGTERM) 20:00:39.134950 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21911): Terminating (SIGTERM) 20:00:39.144923 --- ParallelTerminationStrategy: PID 21899 died... 20:00:39.201131 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21899): Terminated: ok {rc=0} 20:00:39.211524 --- ParallelTerminationStrategy: PID 21900 died... 20:00:39.268324 run iperf3-srv_10.42.42.10(pid=21900): Terminated {rc=256} 20:00:39.278415 --- ParallelTerminationStrategy: PID 21901 died... 20:00:39.334565 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21901): Terminated: ok {rc=0} 20:00:39.345172 --- ParallelTerminationStrategy: PID 21902 died... 20:00:39.400987 run iperf3-srv_10.42.42.10(pid=21902): Terminated {rc=256} 20:00:39.411350 --- ParallelTerminationStrategy: PID 21905 died... 20:00:39.467571 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21905): Terminated: ok {rc=0} 20:00:39.477800 --- ParallelTerminationStrategy: PID 21908 died... 20:00:39.533760 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21908): Terminated: ok {rc=0} 20:00:39.544121 --- ParallelTerminationStrategy: PID 21911 died... 20:00:39.601213 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21911): Terminated: ok {rc=0} 20:00:39.688586 bus /gobi_0: Setting Powered False 20:00:40.795804 bus /gobi_0: Setting Powered False 20:00:41.908708 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21909): Process ended prematurely: osmo-stp_10.42.42.5(pid=21909) [trial-2381↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21909)]