Failed
gprs:trx-lms.cs_paging_gprs_active.py (from gprs_trx-lms)
Stacktrace
osmo-stp_10.42.42.5(pid=21697): Process ended prematurely: osmo-stp_10.42.42.5(pid=21697) [trial-2381↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21697)]
Standard Output
---------------------------------------------- trial-2381 gprs:trx-lms cs_paging_gprs_active.py ---------------------------------------------- 19:57:29.099638 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 19:57:29.110179 tst gprs:trx-lms: Using 1 x bts (candidates: 1) 19:57:29.245214 tst cs_paging_gprs_active.py: using LAC 31144 19:57:29.361992 tst cs_paging_gprs_active.py: using RAC 34 19:57:29.478424 tst cs_paging_gprs_active.py: using CellId 31144 19:57:29.598587 tst cs_paging_gprs_active.py: using BVCI 31145 19:57:29.621380 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 19:57:29.631969 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 19:57:29.642372 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 19:57:29.652724 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 19:57:29.663006 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 19:57:29.673291 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 19:57:29.683659 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 19:57:29.693873 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 19:57:29.704295 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 19:57:29.822880 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 19:57:30.101583 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:57:30.226454 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:57:30.540282 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21687): Launched 19:57:30.800359 run iperf3-srv_10.42.42.10(pid=21688): Launched 19:57:31.022920 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:57:31.149547 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:57:31.482342 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21689): Launched 19:57:31.761291 run iperf3-srv_10.42.42.10(pid=21690): Launched 19:57:31.947457 tst cs_paging_gprs_active.py:38: start network... 19:57:32.073894 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:57:32.548418 run create_hlr_db(pid=21691): Launched 19:57:32.720776 bus /sierra_2: Setting Powered False 19:57:33.742716 run create_hlr_db(pid=21691): Terminated: ok {rc=0} 19:57:34.178061 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21693): Launched 19:57:34.504191 run osmo-hlr_10.42.42.2(pid=21694): Launched 19:57:34.622182 run osmo-stp_10.42.42.5: Starting osmo-stp 19:57:35.187042 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21696): Launched 19:57:35.511527 run osmo-stp_10.42.42.5(pid=21697): Launched 19:57:35.629229 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:57:36.194441 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21699): Launched 19:57:36.309531 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:57:36.594665 run patchelf(pid=21700): Launched 19:57:36.783993 run osmo-stp_10.42.42.5(pid=21697): ERR: Terminated: ERROR {rc=1} [trial-2381↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21697)] 19:57:36.922747 run osmo-stp_10.42.42.5(pid=21697): stdout: | (launched: 2022-12-12_19:57:35.351140) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:57:37.061124 run osmo-stp_10.42.42.5(pid=21697): stderr: | �[0;m�[38;5;43m20221212195735542 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212195735542 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212195735542 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212195735543 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212195735543 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212195735543 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212195735543 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:57:37.194413 run osmo-stp_10.42.42.5(pid=21697): stdout: | (launched: 2022-12-12_19:57:35.351140) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:57:37.326474 run osmo-stp_10.42.42.5(pid=21697): stderr: | �[0;m�[38;5;43m20221212195735542 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212195735542 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212195735542 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212195735543 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212195735543 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212195735543 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212195735543 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:57:37.480046 run patchelf(pid=21700): Terminating (SIGINT) 19:57:37.661710 run patchelf(pid=21700): Terminated: ok {rc=0} 19:57:37.694803 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21697): Process ended prematurely: osmo-stp_10.42.42.5(pid=21697) [trial-2381↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21697)] [trial-2381↪gprs:trx-lms↪cs_paging_gprs_active.py:38] 19:57:37.704652 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 19:57:37.768175 run osmo-hlr_10.42.42.2(pid=21694): ERR: Terminated: ERROR {rc=237} [trial-2381↪gprs:trx-lms↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21694)] 19:57:37.820519 run osmo-hlr_10.42.42.2(pid=21694): stdout: | (launched: 2022-12-12_19:57:34.342300) 19:57:37.873322 run osmo-hlr_10.42.42.2(pid=21694): stderr: | �[0;m�[1;31m20221212195734539 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212195734539 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212195734539 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212195734539 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212195734540 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212195734540 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212195734552 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:trx-lms/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212195734561 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212195734561 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212195734561 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:57:37.917830 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21687): Terminating (SIGTERM) 19:57:37.959827 run iperf3-srv_10.42.42.10(pid=21688): Terminating (SIGTERM) 19:57:38.002055 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21689): Terminating (SIGTERM) 19:57:38.044086 run iperf3-srv_10.42.42.10(pid=21690): Terminating (SIGTERM) 19:57:38.086886 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21693): Terminating (SIGTERM) 19:57:38.129248 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21696): Terminating (SIGTERM) 19:57:38.171457 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21699): Terminating (SIGTERM) 19:57:38.181248 --- ParallelTerminationStrategy: PID 21687 died... 19:57:38.237683 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21687): Terminated: ok {rc=0} 19:57:38.248199 --- ParallelTerminationStrategy: PID 21688 died... 19:57:38.304479 run iperf3-srv_10.42.42.10(pid=21688): Terminated {rc=256} 19:57:38.314571 --- ParallelTerminationStrategy: PID 21689 died... 19:57:38.371320 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21689): Terminated: ok {rc=0} 19:57:38.382017 --- ParallelTerminationStrategy: PID 21690 died... 19:57:38.437961 run iperf3-srv_10.42.42.10(pid=21690): Terminated {rc=256} 19:57:38.448422 --- ParallelTerminationStrategy: PID 21693 died... 19:57:38.504566 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21693): Terminated: ok {rc=0} 19:57:38.515081 --- ParallelTerminationStrategy: PID 21696 died... 19:57:38.571557 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21696): Terminated: ok {rc=0} 19:57:38.581774 --- ParallelTerminationStrategy: PID 21699 died... 19:57:38.637919 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21699): Terminated: ok {rc=0} 19:57:38.725755 bus /gobi_0: Setting Powered False 19:57:39.830762 bus /gobi_0: Setting Powered False 19:57:40.940651 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21697): Process ended prematurely: osmo-stp_10.42.42.5(pid=21697) [trial-2381↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21697)]