Failed
dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=13313): Process ended prematurely: osmo-stp_10.42.42.5(pid=13313) [trial-2388↪dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13313)]
Standard Output
---------------------------------------------- trial-2388 dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 11:19:01.256051 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 11:19:01.271998 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 11:19:01.471313 tst switch_tch_pdch.py: using LAC 33582 11:19:01.621983 tst switch_tch_pdch.py: using RAC 177 11:19:01.757523 tst switch_tch_pdch.py: using CellId 33582 11:19:01.885981 tst switch_tch_pdch.py: using BVCI 33583 11:19:01.911713 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 11:19:01.925062 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 11:19:01.938155 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 11:19:01.951487 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 11:19:01.966342 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 11:19:01.980597 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 11:19:01.995184 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 11:19:02.009558 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 11:19:02.133952 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 11:19:02.425603 tst switch_tch_pdch.py:51: start network... 11:19:02.557063 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:19:03.049069 run create_hlr_db(pid=13307): Launched 11:19:03.231337 bus /gobi_6: Setting Powered False 11:19:04.251582 run create_hlr_db(pid=13307): Terminated: ok {rc=0} 11:19:04.642218 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13309): Launched 11:19:04.932233 run osmo-hlr_10.42.42.2(pid=13310): Launched 11:19:05.046869 run osmo-stp_10.42.42.5: Starting osmo-stp 11:19:05.559242 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13312): Launched 11:19:05.849893 run osmo-stp_10.42.42.5(pid=13313): Launched 11:19:05.956071 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:19:06.462635 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13315): Launched 11:19:06.566056 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:19:06.819931 run patchelf(pid=13316): Launched 11:19:06.990338 run osmo-stp_10.42.42.5(pid=13313): ERR: Terminated: ERROR {rc=1} [trial-2388↪dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13313)] 11:19:07.115504 run osmo-stp_10.42.42.5(pid=13313): stdout: | (launched: 2022-12-13_11:19:05.706607) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:19:07.240564 run osmo-stp_10.42.42.5(pid=13313): stderr: | �[0;m�[38;5;43m20221213111905877 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213111905877 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213111905878 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213111905878 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213111905878 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213111905878 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213111905879 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:19:07.362338 run osmo-stp_10.42.42.5(pid=13313): stdout: | (launched: 2022-12-13_11:19:05.706607) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:19:07.482480 run osmo-stp_10.42.42.5(pid=13313): stderr: | �[0;m�[38;5;43m20221213111905877 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213111905877 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213111905878 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213111905878 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213111905878 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213111905878 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213111905879 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:19:07.622636 run patchelf(pid=13316): Terminating (SIGINT) 11:19:07.786674 run patchelf(pid=13316): Terminated: ok {rc=0} 11:19:07.816614 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=13313): Process ended prematurely: osmo-stp_10.42.42.5(pid=13313) [trial-2388↪dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13313)] [trial-2388↪dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54] 11:19:07.825393 tst switch_tch_pdch.py:54: Test FAILED (6.6 sec) 11:19:07.884360 run osmo-hlr_10.42.42.2(pid=13310): ERR: Terminated: ERROR {rc=237} [trial-2388↪dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13310)] 11:19:07.932727 run osmo-hlr_10.42.42.2(pid=13310): stdout: | (launched: 2022-12-13_11:19:04.789679) 11:19:07.981673 run osmo-hlr_10.42.42.2(pid=13310): stderr: | �[0;m�[1;31m20221213111904962 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213111904962 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213111904962 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213111904962 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213111904962 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213111904962 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213111904974 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213111904985 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213111904985 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213111904985 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:19:08.023579 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13309): Terminating (SIGTERM) 11:19:08.063023 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13312): Terminating (SIGTERM) 11:19:08.102640 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13315): Terminating (SIGTERM) 11:19:08.111758 --- ParallelTerminationStrategy: PID 13309 died... 11:19:08.164726 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13309): Terminated: ok {rc=0} 11:19:08.174225 --- ParallelTerminationStrategy: PID 13312 died... 11:19:08.226780 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13312): Terminated: ok {rc=0} 11:19:08.236220 --- ParallelTerminationStrategy: PID 13315 died... 11:19:08.288918 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13315): Terminated: ok {rc=0} 11:19:08.376263 bus /gobi_0: Setting Powered False 11:19:09.478787 bus /gobi_0: Setting Powered False 11:19:10.589236 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13313): Process ended prematurely: osmo-stp_10.42.42.5(pid=13313) [trial-2388↪dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13313)]