Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=13250): Process ended prematurely: osmo-stp_10.42.42.5(pid=13250) [trial-2388↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13250)]
Standard Output
---------------------------------------------- trial-2388 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 11:18:01.880034 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:18:01.892896 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 11:18:02.031939 tst cs_paging_gprs_active.py: using LAC 33577 11:18:02.152506 tst cs_paging_gprs_active.py: using RAC 172 11:18:02.289723 tst cs_paging_gprs_active.py: using CellId 33577 11:18:02.415414 tst cs_paging_gprs_active.py: using BVCI 33578 11:18:02.438598 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:18:02.450388 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:18:02.461915 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:18:02.473235 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:18:02.484827 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:18:02.496370 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:18:02.510554 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:18:02.522980 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:18:02.535299 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 11:18:02.654217 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 11:18:02.928919 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:18:03.052181 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:18:03.358309 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13240): Launched 11:18:03.612109 run iperf3-srv_10.42.42.10(pid=13241): Launched 11:18:03.791673 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:18:03.915211 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:18:04.220306 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13242): Launched 11:18:04.474133 run iperf3-srv_10.42.42.10(pid=13243): Launched 11:18:04.652880 tst cs_paging_gprs_active.py:38: start network... 11:18:04.775444 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:18:05.253095 run create_hlr_db(pid=13244): Launched 11:18:05.423875 bus /gobi_6: Setting Powered False 11:18:06.446025 run create_hlr_db(pid=13244): Terminated: ok {rc=0} 11:18:06.868701 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13246): Launched 11:18:07.186926 run osmo-hlr_10.42.42.2(pid=13247): Launched 11:18:07.304640 run osmo-stp_10.42.42.5: Starting osmo-stp 11:18:07.856800 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13249): Launched 11:18:08.174710 run osmo-stp_10.42.42.5(pid=13250): Launched 11:18:08.291282 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:18:08.843846 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13252): Launched 11:18:08.957957 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:18:09.234730 run patchelf(pid=13253): Launched 11:18:09.420619 run osmo-stp_10.42.42.5(pid=13250): ERR: Terminated: ERROR {rc=1} [trial-2388↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13250)] 11:18:09.556847 run osmo-stp_10.42.42.5(pid=13250): stdout: | (launched: 2022-12-13_11:18:08.018245) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:18:09.693524 run osmo-stp_10.42.42.5(pid=13250): stderr: | �[0;m�[38;5;43m20221213111808210 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213111808210 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213111808210 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213111808211 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213111808211 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213111808211 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213111808211 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:18:09.825198 run osmo-stp_10.42.42.5(pid=13250): stdout: | (launched: 2022-12-13_11:18:08.018245) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:18:09.955863 run osmo-stp_10.42.42.5(pid=13250): stderr: | �[0;m�[38;5;43m20221213111808210 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213111808210 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213111808210 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213111808211 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213111808211 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213111808211 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213111808211 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:18:10.109040 run patchelf(pid=13253): Terminating (SIGINT) 11:18:10.288059 run patchelf(pid=13253): Terminated: ok {rc=0} 11:18:10.321272 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13250): Process ended prematurely: osmo-stp_10.42.42.5(pid=13250) [trial-2388↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13250)] [trial-2388↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 11:18:10.331125 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 11:18:10.393853 run osmo-hlr_10.42.42.2(pid=13247): ERR: Terminated: ERROR {rc=237} [trial-2388↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13247)] 11:18:10.445268 run osmo-hlr_10.42.42.2(pid=13247): stdout: | (launched: 2022-12-13_11:18:07.030803) 11:18:10.497108 run osmo-hlr_10.42.42.2(pid=13247): stderr: | �[0;m�[1;31m20221213111807232 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213111807232 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213111807232 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213111807232 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213111807232 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213111807232 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213111807245 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213111807253 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213111807254 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213111807254 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:18:10.541323 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13240): Terminating (SIGTERM) 11:18:10.583441 run iperf3-srv_10.42.42.10(pid=13241): Terminating (SIGTERM) 11:18:10.625915 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13242): Terminating (SIGTERM) 11:18:10.667540 run iperf3-srv_10.42.42.10(pid=13243): Terminating (SIGTERM) 11:18:10.709932 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13246): Terminating (SIGTERM) 11:18:10.752020 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13249): Terminating (SIGTERM) 11:18:10.794265 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13252): Terminating (SIGTERM) 11:18:10.803797 --- ParallelTerminationStrategy: PID 13240 died... 11:18:10.859696 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13240): Terminated: ok {rc=0} 11:18:10.869617 --- ParallelTerminationStrategy: PID 13241 died... 11:18:10.924920 run iperf3-srv_10.42.42.10(pid=13241): Terminated {rc=256} 11:18:10.934703 --- ParallelTerminationStrategy: PID 13242 died... 11:18:10.990359 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13242): Terminated: ok {rc=0} 11:18:11.000214 --- ParallelTerminationStrategy: PID 13243 died... 11:18:11.056147 run iperf3-srv_10.42.42.10(pid=13243): Terminated {rc=256} 11:18:11.066037 --- ParallelTerminationStrategy: PID 13246 died... 11:18:11.121776 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13246): Terminated: ok {rc=0} 11:18:11.131603 --- ParallelTerminationStrategy: PID 13249 died... 11:18:11.187213 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13249): Terminated: ok {rc=0} 11:18:11.197174 --- ParallelTerminationStrategy: PID 13252 died... 11:18:11.253047 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13252): Terminated: ok {rc=0} 11:18:11.339352 bus /gobi_0: Setting Powered False 11:18:12.444369 bus /gobi_0: Setting Powered False 11:18:13.554207 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13250): Process ended prematurely: osmo-stp_10.42.42.5(pid=13250) [trial-2388↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13250)]