Failed
gprs:oc2g+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=8283): Process ended prematurely: osmo-stp_10.42.42.5(pid=8283) [trial-2388↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8283)]
Standard Output
---------------------------------------------- trial-2388 gprs:oc2g+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 10:22:47.386280 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:22:47.398086 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 10:22:47.544146 tst ping_idle_ping.py: using LAC 33284 10:22:47.666270 tst ping_idle_ping.py: using RAC 134 10:22:47.788548 tst ping_idle_ping.py: using CellId 33284 10:22:47.910078 tst ping_idle_ping.py: using BVCI 33285 10:22:47.933647 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:22:47.944511 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:22:47.955569 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:22:47.966625 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:22:47.977602 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:22:47.988656 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:22:47.999733 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:22:48.010762 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:22:48.310346 tst ping_idle_ping.py:24: start network... 10:22:48.448820 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:22:48.974508 run create_hlr_db(pid=8277): Launched 10:22:49.165258 bus /gobi_6: Setting Powered False 10:22:50.184751 run create_hlr_db(pid=8277): Terminated: ok {rc=0} 10:22:50.613350 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8279): Launched 10:22:50.943259 run osmo-hlr_10.42.42.2(pid=8280): Launched 10:22:51.063871 run osmo-stp_10.42.42.5: Starting osmo-stp 10:22:51.636308 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8282): Launched 10:22:51.965331 run osmo-stp_10.42.42.5(pid=8283): Launched 10:22:52.080709 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:22:52.619440 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8285): Launched 10:22:52.728893 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:22:52.998250 run patchelf(pid=8286): Launched 10:22:53.176465 run osmo-stp_10.42.42.5(pid=8283): ERR: Terminated: ERROR {rc=1} [trial-2388↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8283)] 10:22:53.306979 run osmo-stp_10.42.42.5(pid=8283): stdout: | (launched: 2022-12-13_10:22:51.802616) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:22:53.437616 run osmo-stp_10.42.42.5(pid=8283): stderr: | �[0;m�[38;5;43m20221213102252060 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213102252061 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213102252061 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213102252061 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213102252062 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213102252062 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213102252062 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:22:53.563678 run osmo-stp_10.42.42.5(pid=8283): stdout: | (launched: 2022-12-13_10:22:51.802616) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:22:53.688718 run osmo-stp_10.42.42.5(pid=8283): stderr: | �[0;m�[38;5;43m20221213102252060 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213102252061 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213102252061 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213102252061 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213102252062 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213102252062 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213102252062 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:22:53.834708 run patchelf(pid=8286): Terminating (SIGINT) 10:22:54.006194 run patchelf(pid=8286): Terminated: ok {rc=0} 10:22:54.037522 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=8283): Process ended prematurely: osmo-stp_10.42.42.5(pid=8283) [trial-2388↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8283)] [trial-2388↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 10:22:54.046489 tst ping_idle_ping.py:27: Test FAILED (6.6 sec) 10:22:54.106716 run osmo-hlr_10.42.42.2(pid=8280): ERR: Terminated: ERROR {rc=237} [trial-2388↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8280)] 10:22:54.156043 run osmo-hlr_10.42.42.2(pid=8280): stdout: | (launched: 2022-12-13_10:22:50.779344) 10:22:54.206154 run osmo-hlr_10.42.42.2(pid=8280): stderr: | �[0;m�[1;31m20221213102250973 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213102250973 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213102250973 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213102250973 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213102250974 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213102250974 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213102250986 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:oc2g+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213102250995 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213102250995 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213102250995 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:22:54.248914 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8279): Terminating (SIGTERM) 10:22:54.289233 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8282): Terminating (SIGTERM) 10:22:54.329666 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8285): Terminating (SIGTERM) 10:22:54.338964 --- ParallelTerminationStrategy: PID 8279 died... 10:22:54.393181 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8279): Terminated: ok {rc=0} 10:22:54.402870 --- ParallelTerminationStrategy: PID 8282 died... 10:22:54.456655 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8282): Terminated: ok {rc=0} 10:22:54.466476 --- ParallelTerminationStrategy: PID 8285 died... 10:22:54.519983 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8285): Terminated: ok {rc=0} 10:22:54.609791 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8283): Process ended prematurely: osmo-stp_10.42.42.5(pid=8283) [trial-2388↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8283)]