Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=10449): Process ended prematurely: osmo-stp_10.42.42.5(pid=10449) [trial-2388↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10449)]
Standard Output
---------------------------------------------- trial-2388 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 10:46:01.786115 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:46:01.798514 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 10:46:01.959423 tst cs_paging_gprs_active.py: using LAC 33407 10:46:02.094152 tst cs_paging_gprs_active.py: using RAC 2 10:46:02.234692 tst cs_paging_gprs_active.py: using CellId 33407 10:46:02.366955 tst cs_paging_gprs_active.py: using BVCI 33408 10:46:02.392868 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:46:02.404267 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:46:02.415620 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:46:02.426928 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:46:02.438478 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:46:02.450137 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:46:02.461765 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:46:02.473161 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:46:02.484691 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 10:46:02.603163 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 10:46:02.904918 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:46:03.044189 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:46:03.389391 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10439): Launched 10:46:03.675075 run iperf3-srv_10.42.42.10(pid=10440): Launched 10:46:03.878610 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:46:04.017378 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:46:04.361830 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10441): Launched 10:46:04.648741 run iperf3-srv_10.42.42.10(pid=10442): Launched 10:46:04.852805 tst cs_paging_gprs_active.py:38: start network... 10:46:04.992220 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:46:05.519004 run create_hlr_db(pid=10443): Launched 10:46:05.696532 bus /gobi_6: Setting Powered False 10:46:06.717691 run create_hlr_db(pid=10443): Terminated: ok {rc=0} 10:46:07.159847 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10445): Launched 10:46:07.493102 run osmo-hlr_10.42.42.2(pid=10446): Launched 10:46:07.619644 run osmo-stp_10.42.42.5: Starting osmo-stp 10:46:08.194863 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10448): Launched 10:46:08.527635 run osmo-stp_10.42.42.5(pid=10449): Launched 10:46:08.648491 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:46:09.225925 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10451): Launched 10:46:09.344302 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:46:09.632591 run patchelf(pid=10452): Launched 10:46:09.826106 run osmo-stp_10.42.42.5(pid=10449): ERR: Terminated: ERROR {rc=1} [trial-2388↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10449)] 10:46:09.966962 run osmo-stp_10.42.42.5(pid=10449): stdout: | (launched: 2022-12-13_10:46:08.362686) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:46:10.108170 run osmo-stp_10.42.42.5(pid=10449): stderr: | �[0;m�[38;5;43m20221213104608551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213104608551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213104608551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213104608552 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213104608552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213104608553 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213104608553 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:46:10.244561 run osmo-stp_10.42.42.5(pid=10449): stdout: | (launched: 2022-12-13_10:46:08.362686) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:46:10.379920 run osmo-stp_10.42.42.5(pid=10449): stderr: | �[0;m�[38;5;43m20221213104608551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213104608551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213104608551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213104608552 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213104608552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213104608553 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213104608553 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:46:10.538048 run patchelf(pid=10452): Terminating (SIGINT) 10:46:10.723668 run patchelf(pid=10452): Terminated: ok {rc=0} 10:46:10.757582 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10449): Process ended prematurely: osmo-stp_10.42.42.5(pid=10449) [trial-2388↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10449)] [trial-2388↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 10:46:10.767529 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 10:46:10.831538 run osmo-hlr_10.42.42.2(pid=10446): ERR: Terminated: ERROR {rc=237} [trial-2388↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10446)] 10:46:10.883268 run osmo-hlr_10.42.42.2(pid=10446): stdout: | (launched: 2022-12-13_10:46:07.328506) 10:46:10.935826 run osmo-hlr_10.42.42.2(pid=10446): stderr: | �[0;m�[1;31m20221213104607524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213104607524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213104607524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213104607524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213104607524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213104607525 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213104607536 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213104607545 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213104607545 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213104607545 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:46:10.980792 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10439): Terminating (SIGTERM) 10:46:11.023118 run iperf3-srv_10.42.42.10(pid=10440): Terminating (SIGTERM) 10:46:11.065686 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10441): Terminating (SIGTERM) 10:46:11.108433 run iperf3-srv_10.42.42.10(pid=10442): Terminating (SIGTERM) 10:46:11.151151 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10445): Terminating (SIGTERM) 10:46:11.193621 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10448): Terminating (SIGTERM) 10:46:11.235937 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10451): Terminating (SIGTERM) 10:46:11.245840 --- ParallelTerminationStrategy: PID 10439 died... 10:46:11.303108 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10439): Terminated: ok {rc=0} 10:46:11.313542 --- ParallelTerminationStrategy: PID 10440 died... 10:46:11.370098 run iperf3-srv_10.42.42.10(pid=10440): Terminated {rc=256} 10:46:11.380293 --- ParallelTerminationStrategy: PID 10441 died... 10:46:11.436879 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10441): Terminated: ok {rc=0} 10:46:11.447136 --- ParallelTerminationStrategy: PID 10442 died... 10:46:11.503650 run iperf3-srv_10.42.42.10(pid=10442): Terminated {rc=256} 10:46:11.513949 --- ParallelTerminationStrategy: PID 10445 died... 10:46:11.570721 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10445): Terminated: ok {rc=0} 10:46:11.581014 --- ParallelTerminationStrategy: PID 10448 died... 10:46:11.637718 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10448): Terminated: ok {rc=0} 10:46:11.648081 --- ParallelTerminationStrategy: PID 10451 died... 10:46:11.704655 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10451): Terminated: ok {rc=0} 10:46:11.792748 bus /gobi_0: Setting Powered False 10:46:12.900095 bus /gobi_0: Setting Powered False 10:46:14.009722 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10449): Process ended prematurely: osmo-stp_10.42.42.5(pid=10449) [trial-2388↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10449)]