Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=16992): Process ended prematurely: osmo-stp_10.42.42.5(pid=16992) [trial-2389↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16992)]
Standard Output
---------------------------------------------- trial-2389 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 11:56:29.015382 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:56:29.026197 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 11:56:29.164594 tst cs_paging_gprs_active.py: using LAC 33777 11:56:29.283415 tst cs_paging_gprs_active.py: using RAC 117 11:56:29.407120 tst cs_paging_gprs_active.py: using CellId 33777 11:56:29.525291 tst cs_paging_gprs_active.py: using BVCI 33778 11:56:29.548567 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:56:29.559511 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:56:29.570215 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:56:29.580835 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:56:29.591471 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:56:29.602123 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:56:29.612943 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:56:29.623557 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:56:29.634456 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:56:29.754375 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:56:30.036135 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:56:30.164040 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:56:30.482783 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16982): Launched 11:56:30.746859 run iperf3-srv_10.42.42.10(pid=16983): Launched 11:56:30.935921 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:56:31.066247 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:56:31.404115 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16984): Launched 11:56:31.687820 run iperf3-srv_10.42.42.10(pid=16985): Launched 11:56:31.878100 tst cs_paging_gprs_active.py:38: start network... 11:56:32.007865 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:56:32.499873 run create_hlr_db(pid=16986): Launched 11:56:32.675627 bus /gobi_6: Setting Powered False 11:56:33.696144 run create_hlr_db(pid=16986): Terminated: ok {rc=0} 11:56:34.102689 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16988): Launched 11:56:34.407963 run osmo-hlr_10.42.42.2(pid=16989): Launched 11:56:34.519408 run osmo-stp_10.42.42.5: Starting osmo-stp 11:56:35.051261 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16991): Launched 11:56:35.357726 run osmo-stp_10.42.42.5(pid=16992): Launched 11:56:35.468213 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:56:36.000850 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16994): Launched 11:56:36.109389 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:56:36.376582 run patchelf(pid=16995): Launched 11:56:36.555731 run osmo-stp_10.42.42.5(pid=16992): ERR: Terminated: ERROR {rc=1} [trial-2389↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16992)] 11:56:36.686756 run osmo-stp_10.42.42.5(pid=16992): stdout: | (launched: 2022-12-13_11:56:35.207266) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:56:36.818361 run osmo-stp_10.42.42.5(pid=16992): stderr: | �[0;m�[38;5;43m20221213115635377 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213115635378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213115635378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213115635378 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213115635379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213115635379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213115635379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:56:36.944402 run osmo-stp_10.42.42.5(pid=16992): stdout: | (launched: 2022-12-13_11:56:35.207266) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:56:37.069625 run osmo-stp_10.42.42.5(pid=16992): stderr: | �[0;m�[38;5;43m20221213115635377 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213115635378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213115635378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213115635378 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213115635379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213115635379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213115635379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:56:37.216417 run patchelf(pid=16995): Terminating (SIGINT) 11:56:37.387939 run patchelf(pid=16995): Terminated: ok {rc=0} 11:56:37.419540 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=16992): Process ended prematurely: osmo-stp_10.42.42.5(pid=16992) [trial-2389↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16992)] [trial-2389↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 11:56:37.428808 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 11:56:37.488503 run osmo-hlr_10.42.42.2(pid=16989): ERR: Terminated: ERROR {rc=237} [trial-2389↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16989)] 11:56:37.537223 run osmo-hlr_10.42.42.2(pid=16989): stdout: | (launched: 2022-12-13_11:56:34.257725) 11:56:37.586540 run osmo-hlr_10.42.42.2(pid=16989): stderr: | �[0;m�[1;31m20221213115634432 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213115634432 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213115634432 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213115634432 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213115634432 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213115634432 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213115634447 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2389/run.2022-12-13_11-32-52/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213115634457 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213115634457 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213115634458 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:56:37.628502 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16982): Terminating (SIGTERM) 11:56:37.667850 run iperf3-srv_10.42.42.10(pid=16983): Terminating (SIGTERM) 11:56:37.707292 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16984): Terminating (SIGTERM) 11:56:37.746671 run iperf3-srv_10.42.42.10(pid=16985): Terminating (SIGTERM) 11:56:37.786598 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16988): Terminating (SIGTERM) 11:56:37.826649 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16991): Terminating (SIGTERM) 11:56:37.866460 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16994): Terminating (SIGTERM) 11:56:37.875501 --- ParallelTerminationStrategy: PID 16982 died... 11:56:37.928222 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16982): Terminated: ok {rc=0} 11:56:37.937678 --- ParallelTerminationStrategy: PID 16983 died... 11:56:37.989869 run iperf3-srv_10.42.42.10(pid=16983): Terminated {rc=256} 11:56:37.999195 --- ParallelTerminationStrategy: PID 16984 died... 11:56:38.051558 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16984): Terminated: ok {rc=0} 11:56:38.061350 --- ParallelTerminationStrategy: PID 16985 died... 11:56:38.113530 run iperf3-srv_10.42.42.10(pid=16985): Terminated {rc=256} 11:56:38.122880 --- ParallelTerminationStrategy: PID 16988 died... 11:56:38.175121 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16988): Terminated: ok {rc=0} 11:56:38.184543 --- ParallelTerminationStrategy: PID 16991 died... 11:56:38.236710 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16991): Terminated: ok {rc=0} 11:56:38.246079 --- ParallelTerminationStrategy: PID 16994 died... 11:56:38.298432 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16994): Terminated: ok {rc=0} 11:56:38.385790 bus /gobi_0: Setting Powered False 11:56:39.490706 bus /gobi_0: Setting Powered False 11:56:40.598423 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16992): Process ended prematurely: osmo-stp_10.42.42.5(pid=16992) [trial-2389↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16992)]