Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=19016): Process ended prematurely: osmo-stp_10.42.42.5(pid=19016) [trial-2389↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19016)]
Standard Output
---------------------------------------------- trial-2389 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 12:13:49.541454 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:13:49.552313 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 12:13:49.689738 tst cs_paging_gprs_active.py: using LAC 33868 12:13:49.810548 tst cs_paging_gprs_active.py: using RAC 208 12:13:49.933998 tst cs_paging_gprs_active.py: using CellId 33868 12:13:50.057789 tst cs_paging_gprs_active.py: using BVCI 33869 12:13:50.081629 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:13:50.092591 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:13:50.103288 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:13:50.114029 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:13:50.124490 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:13:50.135560 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:13:50.146376 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:13:50.156996 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 12:13:50.167788 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 12:13:50.288893 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 12:13:50.574395 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 12:13:50.703494 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:13:51.025169 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19006): Launched 12:13:51.291625 run iperf3-srv_10.42.42.10(pid=19007): Launched 12:13:51.480807 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 12:13:51.608808 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:13:51.930591 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19008): Launched 12:13:52.197271 run iperf3-srv_10.42.42.10(pid=19009): Launched 12:13:52.385843 tst cs_paging_gprs_active.py:38: start network... 12:13:52.514115 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:13:53.011110 run create_hlr_db(pid=19010): Launched 12:13:53.189998 bus /gobi_6: Setting Powered False 12:13:54.211435 run create_hlr_db(pid=19010): Terminated: ok {rc=0} 12:13:54.654526 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19012): Launched 12:13:54.989915 run osmo-hlr_10.42.42.2(pid=19013): Launched 12:13:55.114230 run osmo-stp_10.42.42.5: Starting osmo-stp 12:13:55.693432 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19015): Launched 12:13:56.026637 run osmo-stp_10.42.42.5(pid=19016): Launched 12:13:56.147214 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:13:56.725360 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19018): Launched 12:13:56.843678 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:13:57.132527 run patchelf(pid=19019): Launched 12:13:57.327221 run osmo-stp_10.42.42.5(pid=19016): ERR: Terminated: ERROR {rc=1} [trial-2389↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19016)] 12:13:57.469594 run osmo-stp_10.42.42.5(pid=19016): stdout: | (launched: 2022-12-13_12:13:55.862087) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:13:57.612023 run osmo-stp_10.42.42.5(pid=19016): stderr: | �[0;m�[38;5;43m20221213121356051 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213121356051 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213121356051 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213121356051 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213121356052 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213121356052 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213121356052 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:13:57.749705 run osmo-stp_10.42.42.5(pid=19016): stdout: | (launched: 2022-12-13_12:13:55.862087) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:13:57.885413 run osmo-stp_10.42.42.5(pid=19016): stderr: | �[0;m�[38;5;43m20221213121356051 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213121356051 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213121356051 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213121356051 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213121356052 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213121356052 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213121356052 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:13:58.044132 run patchelf(pid=19019): Terminating (SIGINT) 12:13:58.230003 run patchelf(pid=19019): Terminated: ok {rc=0} 12:13:58.263977 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=19016): Process ended prematurely: osmo-stp_10.42.42.5(pid=19016) [trial-2389↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19016)] [trial-2389↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 12:13:58.274097 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 12:13:58.338138 run osmo-hlr_10.42.42.2(pid=19013): ERR: Terminated: ERROR {rc=237} [trial-2389↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19013)] 12:13:58.389752 run osmo-hlr_10.42.42.2(pid=19013): stdout: | (launched: 2022-12-13_12:13:54.824560) 12:13:58.442120 run osmo-hlr_10.42.42.2(pid=19013): stderr: | �[0;m�[1;31m20221213121355020 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213121355020 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213121355020 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213121355020 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213121355021 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213121355021 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213121355033 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2389/run.2022-12-13_11-32-52/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213121355042 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213121355042 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213121355042 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:13:58.487018 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19006): Terminating (SIGTERM) 12:13:58.529882 run iperf3-srv_10.42.42.10(pid=19007): Terminating (SIGTERM) 12:13:58.572162 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19008): Terminating (SIGTERM) 12:13:58.614369 run iperf3-srv_10.42.42.10(pid=19009): Terminating (SIGTERM) 12:13:58.657236 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19012): Terminating (SIGTERM) 12:13:58.699724 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19015): Terminating (SIGTERM) 12:13:58.742050 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19018): Terminating (SIGTERM) 12:13:58.751748 --- ParallelTerminationStrategy: PID 19006 died... 12:13:58.808473 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19006): Terminated: ok {rc=0} 12:13:58.818608 --- ParallelTerminationStrategy: PID 19007 died... 12:13:58.874922 run iperf3-srv_10.42.42.10(pid=19007): Terminated {rc=256} 12:13:58.885041 --- ParallelTerminationStrategy: PID 19008 died... 12:13:58.941440 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19008): Terminated: ok {rc=0} 12:13:58.951554 --- ParallelTerminationStrategy: PID 19009 died... 12:13:59.007870 run iperf3-srv_10.42.42.10(pid=19009): Terminated {rc=256} 12:13:59.018005 --- ParallelTerminationStrategy: PID 19012 died... 12:13:59.074503 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19012): Terminated: ok {rc=0} 12:13:59.084724 --- ParallelTerminationStrategy: PID 19015 died... 12:13:59.141389 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19015): Terminated: ok {rc=0} 12:13:59.151524 --- ParallelTerminationStrategy: PID 19018 died... 12:13:59.208037 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19018): Terminated: ok {rc=0} 12:13:59.295608 bus /gobi_0: Setting Powered False 12:14:00.401437 bus /gobi_0: Setting Powered False 12:14:01.522194 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19016): Process ended prematurely: osmo-stp_10.42.42.5(pid=19016) [trial-2389↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19016)]