Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=2124): Process ended prematurely: osmo-stp_10.42.42.5(pid=2124) [trial-2391↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2124)]
Standard Output
---------------------------------------------- trial-2391 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 15:52:56.661262 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:52:56.672101 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 15:52:56.799322 tst cs_paging_gprs_active.py: using LAC 34653 15:52:56.922239 tst cs_paging_gprs_active.py: using RAC 228 15:52:57.046049 tst cs_paging_gprs_active.py: using CellId 34653 15:52:57.166859 tst cs_paging_gprs_active.py: using BVCI 34654 15:52:57.190468 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:52:57.201268 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:52:57.211715 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:52:57.222310 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:52:57.232719 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:52:57.243526 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:52:57.254779 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:52:57.265762 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:52:57.276933 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 15:52:57.402496 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 15:52:57.703564 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 15:52:57.842735 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:52:58.188145 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2114): Launched 15:52:58.476394 run iperf3-srv_10.42.42.10(pid=2115): Launched 15:52:58.678837 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 15:52:58.816524 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:52:59.162522 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2116): Launched 15:52:59.449400 run iperf3-srv_10.42.42.10(pid=2117): Launched 15:52:59.652060 tst cs_paging_gprs_active.py:38: start network... 15:52:59.790073 run osmo-hlr_10.42.42.2: Starting osmo-hlr 15:53:00.314180 run create_hlr_db(pid=2118): Launched 15:53:00.505276 bus /gobi_6: Setting Powered False 15:53:01.519255 run create_hlr_db(pid=2118): Terminated: ok {rc=0} 15:53:01.962965 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2120): Launched 15:53:02.334245 run osmo-hlr_10.42.42.2(pid=2121): Launched 15:53:02.447367 run osmo-stp_10.42.42.5: Starting osmo-stp 15:53:02.985304 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2123): Launched 15:53:03.294748 run osmo-stp_10.42.42.5(pid=2124): Launched 15:53:03.406026 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 15:53:03.948620 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2126): Launched 15:53:04.058611 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 15:53:04.331983 run patchelf(pid=2127): Launched 15:53:04.513172 run osmo-stp_10.42.42.5(pid=2124): ERR: Terminated: ERROR {rc=1} [trial-2391↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2124)] 15:53:04.645472 run osmo-stp_10.42.42.5(pid=2124): stdout: | (launched: 2022-12-13_15:53:03.142405) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:53:04.778131 run osmo-stp_10.42.42.5(pid=2124): stderr: | �[0;m�[38;5;43m20221213155303313 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213155303313 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213155303313 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213155303314 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213155303314 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213155303314 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213155303314 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:53:04.905761 run osmo-stp_10.42.42.5(pid=2124): stdout: | (launched: 2022-12-13_15:53:03.142405) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:53:05.032214 run osmo-stp_10.42.42.5(pid=2124): stderr: | �[0;m�[38;5;43m20221213155303313 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213155303313 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213155303313 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213155303314 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213155303314 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213155303314 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213155303314 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:53:05.180488 run patchelf(pid=2127): Terminating (SIGINT) 15:53:05.354700 run patchelf(pid=2127): Terminated: ok {rc=0} 15:53:05.386787 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=2124): Process ended prematurely: osmo-stp_10.42.42.5(pid=2124) [trial-2391↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2124)] [trial-2391↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 15:53:05.396140 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 15:53:05.456054 run osmo-hlr_10.42.42.2(pid=2121): ERR: Terminated: ERROR {rc=237} [trial-2391↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2121)] 15:53:05.505079 run osmo-hlr_10.42.42.2(pid=2121): stdout: | (launched: 2022-12-13_15:53:02.124743) 15:53:05.554665 run osmo-hlr_10.42.42.2(pid=2121): stderr: | �[0;m�[1;31m20221213155302316 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213155302316 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213155302316 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213155302316 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213155302316 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213155302316 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213155302342 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2391/run.2022-12-13_15-37-59/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213155302352 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213155302352 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213155302352 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 15:53:05.596926 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2114): Terminating (SIGTERM) 15:53:05.636614 run iperf3-srv_10.42.42.10(pid=2115): Terminating (SIGTERM) 15:53:05.676299 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2116): Terminating (SIGTERM) 15:53:05.715834 run iperf3-srv_10.42.42.10(pid=2117): Terminating (SIGTERM) 15:53:05.755505 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2120): Terminating (SIGTERM) 15:53:05.795780 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2123): Terminating (SIGTERM) 15:53:05.835661 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2126): Terminating (SIGTERM) 15:53:05.844921 --- ParallelTerminationStrategy: PID 2114 died... 15:53:05.898221 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2114): Terminated: ok {rc=0} 15:53:05.907664 --- ParallelTerminationStrategy: PID 2115 died... 15:53:05.960206 run iperf3-srv_10.42.42.10(pid=2115): Terminated {rc=256} 15:53:05.969644 --- ParallelTerminationStrategy: PID 2116 died... 15:53:06.022205 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2116): Terminated: ok {rc=0} 15:53:06.031659 --- ParallelTerminationStrategy: PID 2117 died... 15:53:06.084410 run iperf3-srv_10.42.42.10(pid=2117): Terminated {rc=256} 15:53:06.093931 --- ParallelTerminationStrategy: PID 2120 died... 15:53:06.146489 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2120): Terminated: ok {rc=0} 15:53:06.155904 --- ParallelTerminationStrategy: PID 2123 died... 15:53:06.209000 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2123): Terminated: ok {rc=0} 15:53:06.218472 --- ParallelTerminationStrategy: PID 2126 died... 15:53:06.272070 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2126): Terminated: ok {rc=0} 15:53:06.360846 bus /gobi_0: Setting Powered False 15:53:07.466150 bus /gobi_0: Setting Powered False 15:53:08.577876 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2124): Process ended prematurely: osmo-stp_10.42.42.5(pid=2124) [trial-2391↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2124)]