Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=23815): Process ended prematurely: osmo-stp_10.42.42.5(pid=23815) [trial-2393↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23815)]
Standard Output
---------------------------------------------- trial-2393 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 19:42:06.067956 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 19:42:06.078733 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 19:42:06.212054 tst cs_paging_gprs_active.py: using LAC 35834 19:42:06.342833 tst cs_paging_gprs_active.py: using RAC 134 19:42:06.468491 tst cs_paging_gprs_active.py: using CellId 35834 19:42:06.592561 tst cs_paging_gprs_active.py: using BVCI 35835 19:42:06.617052 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 19:42:06.628258 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 19:42:06.639265 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 19:42:06.650260 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 19:42:06.661588 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 19:42:06.672828 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 19:42:06.684279 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 19:42:06.695438 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 19:42:06.706913 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 19:42:06.820906 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 19:42:07.104561 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:42:07.230014 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:42:07.542100 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23805): Launched 19:42:07.799386 run iperf3-srv_10.42.42.10(pid=23806): Launched 19:42:07.981898 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:42:08.106200 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:42:08.417740 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23807): Launched 19:42:08.682663 run iperf3-srv_10.42.42.10(pid=23808): Launched 19:42:08.866057 tst cs_paging_gprs_active.py:38: start network... 19:42:08.990498 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:42:09.471513 run create_hlr_db(pid=23809): Launched 19:42:09.642772 bus /sierra_2: Setting Powered False 19:42:10.666407 run create_hlr_db(pid=23809): Terminated: ok {rc=0} 19:42:11.094409 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23811): Launched 19:42:11.416049 run osmo-hlr_10.42.42.2(pid=23812): Launched 19:42:11.538038 run osmo-stp_10.42.42.5: Starting osmo-stp 19:42:12.097397 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23814): Launched 19:42:12.420025 run osmo-stp_10.42.42.5(pid=23815): Launched 19:42:12.537877 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:42:13.100676 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23817): Launched 19:42:13.216370 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:42:13.496738 run patchelf(pid=23818): Launched 19:42:13.685878 run osmo-stp_10.42.42.5(pid=23815): ERR: Terminated: ERROR {rc=1} [trial-2393↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23815)] 19:42:13.823915 run osmo-stp_10.42.42.5(pid=23815): stdout: | (launched: 2022-12-13_19:42:12.261414) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:42:13.962992 run osmo-stp_10.42.42.5(pid=23815): stderr: | �[0;m�[38;5;43m20221213194212450 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213194212450 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213194212450 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213194212451 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213194212451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213194212451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213194212451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:42:14.096799 run osmo-stp_10.42.42.5(pid=23815): stdout: | (launched: 2022-12-13_19:42:12.261414) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:42:14.229637 run osmo-stp_10.42.42.5(pid=23815): stderr: | �[0;m�[38;5;43m20221213194212450 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213194212450 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213194212450 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213194212451 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213194212451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213194212451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213194212451 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:42:14.384086 run patchelf(pid=23818): Terminating (SIGINT) 19:42:14.565008 run patchelf(pid=23818): Terminated: ok {rc=0} 19:42:14.598057 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=23815): Process ended prematurely: osmo-stp_10.42.42.5(pid=23815) [trial-2393↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23815)] [trial-2393↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 19:42:14.608015 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 19:42:14.671586 run osmo-hlr_10.42.42.2(pid=23812): ERR: Terminated: ERROR {rc=237} [trial-2393↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23812)] 19:42:14.722939 run osmo-hlr_10.42.42.2(pid=23812): stdout: | (launched: 2022-12-13_19:42:11.257711) 19:42:14.774850 run osmo-hlr_10.42.42.2(pid=23812): stderr: | �[0;m�[1;31m20221213194211452 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213194211452 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213194211452 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213194211452 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213194211452 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213194211452 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213194211465 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213194211473 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213194211473 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213194211473 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:42:14.819357 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23805): Terminating (SIGTERM) 19:42:14.861219 run iperf3-srv_10.42.42.10(pid=23806): Terminating (SIGTERM) 19:42:14.902990 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23807): Terminating (SIGTERM) 19:42:14.945060 run iperf3-srv_10.42.42.10(pid=23808): Terminating (SIGTERM) 19:42:14.986854 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23811): Terminating (SIGTERM) 19:42:15.028670 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23814): Terminating (SIGTERM) 19:42:15.070361 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23817): Terminating (SIGTERM) 19:42:15.079932 --- ParallelTerminationStrategy: PID 23805 died... 19:42:15.135851 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23805): Terminated: ok {rc=0} 19:42:15.146040 --- ParallelTerminationStrategy: PID 23806 died... 19:42:15.201264 run iperf3-srv_10.42.42.10(pid=23806): Terminated {rc=256} 19:42:15.211342 --- ParallelTerminationStrategy: PID 23807 died... 19:42:15.266200 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23807): Terminated: ok {rc=0} 19:42:15.276026 --- ParallelTerminationStrategy: PID 23808 died... 19:42:15.331220 run iperf3-srv_10.42.42.10(pid=23808): Terminated {rc=256} 19:42:15.341367 --- ParallelTerminationStrategy: PID 23811 died... 19:42:15.396326 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23811): Terminated: ok {rc=0} 19:42:15.406479 --- ParallelTerminationStrategy: PID 23814 died... 19:42:15.461299 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23814): Terminated: ok {rc=0} 19:42:15.471174 --- ParallelTerminationStrategy: PID 23817 died... 19:42:15.526426 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23817): Terminated: ok {rc=0} 19:42:15.612427 bus /gobi_0: Setting Powered False 19:42:16.716673 bus /gobi_0: Setting Powered False 19:42:17.823229 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23815): Process ended prematurely: osmo-stp_10.42.42.5(pid=23815) [trial-2393↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23815)]